Please Note:1. Marvell 9215 chipset, NO RAID function,please note that.2. Need a PCI-e 2.0 x1 (or above) slot to install,please confirm that before offer.3. We will repackage this item to reduce shipping weight paper and bag waste.
Supports 6TB hard drives.(Tested with WD Blue HDD)4-port SATA III 6G PCI-e PCI Express Expansion Controller Card Marvell Chip 9215
Specifacation:Chipset:Marvell 88SE9215Port: 4 Internal SATA 6Gb/s PortsCompliant with PCI-Express Specification v1.0Compliant with Serial ATA Specification 3.0Supports Communication Speeds of 6.0 Gbps, 3.0 Gbps, and 1.5 GbpsHot Plug and Hot SwapSupports Native Command Queue (NCQ)Supports Port Multiplier FIS Based Switching or Command Based SwitchingCompatible with SATA 6G, 3G and 1.5G Hard DrivesSoftware requirement:Windows 8Windows 7VistaWindows XP
General Inquiry:Q: Will this product work on windows home server 2011?A: Yes, this controller has been tested and verified to function within Windows Home Server 2011.Q: How do I boot through this card to a connected drive utilizing a Windows OS?A: A reinstall/repair of the OS is necessary to boot through this card to a connected drive. You will need to performan advanced install, load the drivers from an external device, then select the HDD/SSD to install Windows onto.Q: will this controller support drive over 2TB? (4tb 6tb etc)A: The current limit for supported drives is 6TBQ: I got a question. This SATA controller card can work with DVD Burners? Also with Windows 8.1 64bit edition?A: Yes, this device is compatible with Windows 8.1 systems. Unfortunately not all optical drives are compatible withthis device. We would recommend that you connect any optical drives to the motherboard SATA ports.
Packing including:1x SATA III 4-ports PCI-e Card.1x Driver CD.