We are open Monday through Friday from 7:30 AM to 4:00 PM Pacific Time (PST) - Closed on Weekends.
If you have any questions, please feel free to contact us though the messaging system.
Included in this sale:
-(1x)Cisco Catalyst 2960-S WS-C2960S-48TD-L 48-Port Gigabit Ethernet SFP+ 10G Switch
-(1x) Power Cord
-(1x) Original Mounting Ears
Not Included:*Any other accessories not listed in this post
Physical Condition:*Pre-Owned:
Switch has been set to factory defaults. All ports have been tested. Normal wear and tear which may include some scratches, scuffs, and/or dings. IOS firmware upgraded to 15.2(2a)E1. Listing includes power cord and mounting ears. Pictures are of actual item listed. 30-Day warranty on all items.
GRADE: B
Included in this sale:*New/Sealed:
CLI Info:
Using driver version 1 for media type 1
Base ethernet MAC Address: c4:72:XX:XX:XX:XX
Xmodem file system is available.
The password-recovery mechanism is enabled.
Initializing Flash...
mifs[2]: 10 files, 1 directories
mifs[2]: Total bytes: 1806336
mifs[2]: Bytes used: 612352
mifs[2]: Bytes available : 1193984
mifs[2]: mifs fsck took 1 seconds.
mifs[3]: 0 files, 1 directories
mifs[3]: Total bytes: 3870720
mifs[3]: Bytes used: 1024
mifs[3]: Bytes available : 3869696
mifs[3]: mifs fsck took 2 seconds.
mifs[4]: 5 files, 1 directories
mifs[4]: Total bytes: 258048
mifs[4]: Bytes used: 9216
mifs[4]: Bytes available : 248832
mifs[4]: mifs fsck took 0 seconds.
mifs[5]: 5 files, 1 directories
mifs[5]: Total bytes: 258048
mifs[5]: Bytes used: 9216
mifs[5]: Bytes available : 248832
mifs[5]: mifs fsck took 0 seconds.
mifs[6]: 2 files, 1 directories
mifs[6]: Total bytes :57931776
mifs[6]: Bytes used: 17101824
mifs[6]: Bytes available : 40829952
mifs[6]: mifs fsck took 28 seconds.
...done Initializing Flash.
done.
File and installed, entry point: 0x3000
executing...
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software, C2960S Software (C2960S-UNIVERSALK9-M),Version 15.2(2a)E1, RELEASE SOFTWARE (fc1)
Technical Support: [link removed by ]
Copyright (c) 1986-2014 by Cisco Systems, Inc.
Compiled Wed 10-Dec-14 03:54 by prod_rel_team
Initializing flashfs...
Using driver version 4 for media type 1
mifs[4]: 10 files, 1 directories
mifs[4]: Total bytes : 1806336
mifs[4]: Bytes used : 612352
mifs[4]: Bytes available : 1193984
mifs[4]: mifs fsck took 0 seconds.
mifs[4]: Initialization complete.
mifs[5]: 0 files, 1 directories
mifs[5]: Total bytes : 3870720
mifs[5]: Bytes used : 1024
mifs[5]: Bytes available : 3869696
mifs[5]: mifs fsck took 0 seconds.
mifs[5]: Initialization complete.
mifs[6]: 5 files, 1 directories
mifs[6]: Total bytes : 258048
mifs[6]: Bytes used : 9216
mifs[6]: Bytes available : 248832
mifs[6]: mifs fsck took 0 seconds.
mifs[6]: Initialization complete.
mifs[7]: 5 files, 1 directories
mifs[7]: Total bytes : 258048
mifs[7]: Bytes used : 9216
mifs[7]: Bytes available : 248832
mifs[7]: mifs fsck took 0 seconds.
mifs[7]: Initialization complete.
mifs[8]: 2 files, 1 directories
mifs[8]: Total bytes : 57931776
mifs[8]: Bytes used : 17101824
mifs[8]: Bytes available : 40829952
mifs[8]: mifs fsck took 0 seconds.
mifs[8]: Initialization complete.
...done Initializing flashfs.
Checking for Bootloader upgrade..
Boot Loader upgrade not required (Stage 2)
FIPS: Flash Key Check : Begin
FIPS: Flash Key Check : End, Not Found, FIPS Mode NotEnabled
POST: MA BIST : Begin
FC 1 MBIST Test Passed.
DP Sg1 MBIST Test Passed.
DP Xg1 MBIST Test Passed.
NI 1 MBIST Test Passed.
FC 0 MBIST Test Passed.
DP Sg0 MBIST Test Passed.
DP Xg0 MBIST Test Passed.
NI 0 MBIST Test Passed.
UPB MBIST Test Passed.
POST: MA BIST : End, Status Passed
POST: TCAM BIST : Begin
POST: TCAM BIST : End, Status Passed
extracting front_end/front_end_ucode_info (86 bytes)
Waiting for Stack Master Election...
POST: Thermal, Fan Tests : Begin
POST: Thermal, Fan Tests : End, Status Passed
POST: PortASIC Stack Port Loopback Tests : Begin
POST: PortASIC Stack Port Loopback Tests : End, StatusPassed
POST: PortASIC Port Loopback Tests : Begin
POST: PortASIC Port Loopback Tests : End, Status Passed
POST: EMAC Loopback Tests : Begin
POST: EMAC Loopback Tests : End, Status Passed
Election Complete
Switch 1 booting as Master
Waiting for Port download...Complete
This product contains cryptographic features and is subjectto United
States and local country laws governing import, export,transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or useencryption.
Importers, exporters, distributors and users are responsiblefor
compliance with U.S. and local country laws. By using thisproduct you
agree to comply with applicable laws and regulations. If youare unable
to comply with U.S. and local laws, return this productimmediately.
A summary of U.S. laws governing Cisco cryptographicproducts may be found at:
[link removed by ]
If you require further assistance please contact us bysending email to
[Removed per Policy].
cisco WS-C2960S-48TD-L (PowerPC) processor (revision Q0)with 131072K bytes of memory.
Processor board ID FOC185XXXXX
Last reset from power-on
1 Virtual Ethernet interface
1 FastEthernet interface
50 Gigabit Ethernet interfaces
2 Ten Gigabit Ethernet interfaces
The password-recovery mechanism is enabled.
512K bytes of flash-simulated non-volatile configurationmemory.
Base ethernet MACAddress : C4:72:XX:XX:XX:XX
Motherboard assembly number :73-11905-12
Power supply partnumber : 341-0327-06
Motherboard serialnumber : FOC185XXXXX
Power supply serial number :LIT184XXXXX
Model revisionnumber : Q0
Motherboard revision number : A0
Modelnumber: WS-C2960S-48TD-L
Daughterboard assembly number : 73-11933-04
Daughterboard serial number :FOC185XXXXX
System serialnumber :FOC185XXXXX
Top Assembly PartNumber : 800-30925-07
Top Assembly Revision Number : C0
VersionID: V07
CLEI CodeNumber: CMMMCXXXXX
Daughterboard revision number : A0
Hardware Board Revision Number : 0x01
Switch PortsModelSW Version SWImage
------ ------------------------------
* 1 52 class=\"MsoNormal\" style=\"text-align: left;\">
Press RETURN to get started!
*Mar 1 00:00:10.936: Read env variable -LICENSE_BOOT_LEVEL =
Mar 30 Module name = c2960s_lanbaseNext reboot level = lanbase and License = lanbase
Mar 30 01:28:01.703: %STACKMGR-4-SWITCH_ADDED: Switch 1 hasbeen ADDED to the stack
Mar 30 01:28:02.956: %LINEPROTO-5-UPDOWN: Line protocol onInterface Vlan1, changed state to down
Mar 30 01:28:03.019: %LINEPROTO-5-UPDOWN: Line protocol onInterface FastEthernet0, changed state to down
Mar 30 01:28:06.647: %SPANTREE-5-EXTENDED_SYSID: ExtendedSysId enabled for type vlan
Mar 30 01:28:32.552: %STACKMGR-5-SWITCH_READY: Switch 1 isREADY
Mar 30 01:28:32.552: %STACKMGR-4-STACK_LINK_CHANGE: StackPort 1 Switch 1 has changed to state DOWN
Mar 30 01:28:32.552: %STACKMGR-4-STACK_LINK_CHANGE: StackPort 2 Switch 1 has changed to state DOWN
Mar 30 01:28:33.443: %STACKMGR-5-MASTER_READY: Master Switch1 is READY
Mar 30 01:28:34.030: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C2960S Software (C2960S-UNIVERSALK9-M),Version 15.2(2a)E1, RELEASE SOFTWARE (fc1)
Technical Support: [link removed by ]
Copyright (c) 1986-2014 by Cisco Systems, Inc.
Compiled Wed 10-Dec-14 03:54 by prod_rel_team
Mar 30 01:28:34.654: %USB_CONSOLE-6-MEDIA_USB: Consolemedia-type is USB.
Mar 30 01:28:36.133: %LINK-3-UPDOWN: InterfaceFastEthernet0, changed state to down
Mar 30 01:28:37.139: %LINEPROTO-5-UPDOWN: Line protocol onInterface FastEthernet0, changed state to down
--- SystemConfiguration Dialog ---
Enable secret warning
In order to access the device manager, an enable secret isrequired
If you enter the initial configuration dialog, you will beprompted for the enable secret
If you choose not to enter the intial configuration dialog,or if you exit setup without setting the enable secret,
please set an enable secret using the following CLI inconfiguration mode-
enable secret 0 <cleartext password>
Would you like to enter the initial configuration dialog?[yes/no]: n
Switch>en
Mar 30 01:28:57.607: %LINK-5-CHANGED: Interface Vlan1,changed state to administratively down
Mar 30 01:28:57.607: %LINK-5-CHANGED: InterfaceFastEthernet0, changed state to administratively down
Switch#show env all
FAN is OK
SYSTEM TEMPERATURE is OK
System Temperature Value: 18 Degree Celsius
System Temperature State: GREEN
Yellow Threshold : 54 Degree Celsius
Red Threshold : 64 Degree Celsius
SWPIDSerial#Status SysPwr PoE Pwr Watts
-- ------------------ ------------------------- ------- ------- -----
1Built-inGood
SWStatus RPSName RPS Serial#RPS Port#
-- ------------- --------------------------- ---------
1<><>
Switch#show flash
Mar 30 01:29:08.397: %PNP-6-HTTP_CONNECTING: PnP Discoverytrying to connect to PnP server [link removed by ]
Directory of flash:/
2 -rwx16961536 Jan 1 1970 00:09:18 class=\"MsoNormal\" style=\"text-align: left;\"> 3 -rwx1048 Mar 30 2011 01:28:36 +00:00 multiple-fs
57931776 bytes total (40829952 bytes free)
Switch#show vlan
VLAN NameStatusPorts
---- -------------------------------- class=\"MsoNormal\" style=\"text-align: left;\">1 defaultactive Gi1/0/1, Gi1/0/2, Gi1/0/3
Gi1/0/4, Gi1/0/5, Gi1/0/6
Gi1/0/7, Gi1/0/8, Gi1/0/9
Gi1/0/10, Gi1/0/11, Gi1/0/12
Gi1/0/13, Gi1/0/14, Gi1/0/15
Gi1/0/16, Gi1/0/17, Gi1/0/18
Gi1/0/19, Gi1/0/20, Gi1/0/21
Gi1/0/22, Gi1/0/23, Gi1/0/24
Gi1/0/25,Gi1/0/26, Gi1/0/27
Gi1/0/28, Gi1/0/29, Gi1/0/30
Gi1/0/31, Gi1/0/32, Gi1/0/33
Gi1/0/34, Gi1/0/35, Gi1/0/36
Gi1/0/37, Gi1/0/38, Gi1/0/39
Gi1/0/40, Gi1/0/41, Gi1/0/42
Gi1/0/43, Gi1/0/44, Gi1/0/45
Gi1/0/46, Gi1/0/47, Gi1/0/48
Te1/0/1, Te1/0/2
1002fddi-defaultact/unsup
VLAN Type SAIDMTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2
---- ----- ---------- ----- ------ ------ -------- ------------ ------ ------
1 enet100001 1500 -- -- - 00
1002 fddi 101002 1500- -- -- 0 0
1003 tr 1010031500 - -- -- 0 0
1004 fdnet 101004 1500- -- ieee- 0 0
1005 trnet 101005 1500- -- ibm- 0 0
Remote SPAN VLANs
Primary SecondaryTypePorts
------- --------- class=\"MsoNormal\" style=\"text-align: left;\">
Switch#show inventory
NAME: \"1\", DESCR: \"WS-C2960S-48TD-L\"
PID: WS-C2960S-48TD-L , VID: V07 , SN:FOC185XXXXX
** generated Product Details Info may not match on all features**
30-Day Money Back Guarantee
Payment:
We accept payment by any of the following methods:
PayPal, Visa, Master Card, Discover, and American Express.
PayPal PAYMENTS WILL ONLY BE ACCEPTED WITH A CONFIRMED ADDRESS, IF YOU DO NOT HAVE A CONFIRMED ADDRESS, PLEASE USE ANOTHER METHOD OF PAYMENT.
CA residents will be charged7.25%Sales Tax. An additional0.50% for any buyer who lives in the County Of San Joaquin.
Buyers are required to provide payment within 1 week from sale close, unless other arrangements are made. Late payments may result in order cancellation.
IF YOU HAVE A CA RE-SALE CERTIFICATE, PLEASE INFORM US BEFORE FINAL PAYMENT SO WE CAN WAIVE SALES TAX. PLEASE BE READY TO PROVIDE A COPY OF YOUR RESALE CERTIFICATE OR RESALE NUMBER.
PLEASE we are unable to reduce the amount of the invoice for customs purposes.We will only declare items purchased as a commercial sample, nothing else (gift, return, etc.).
Buyer is responsible for all customs fees,AFreshBuy-bdoes not pay any customs fees.
Shipping:
For Domestic U.S. Customers:We Ship Via FedEx & USPS
We will NOT ship to P.O. Boxes when using FedEx.
Any items over $50.00 shipped will require a signature upon delivery.
Any questions or special needsshould be resolved before you purchase. AFreshBuy-b ships within 1 Business Day after payment has cleared. Once payment has cleared AFreshBuy-b will process the order for shipping. If payments clears on Friday AFreshBuy-b will ship-out the order on the nextbusinessday. (Monday)
NO Local pickups!
AFreshBuy-b and all equipment listed by AFreshBuy-b is located at:
Stockton CA
Returns:
Our mission is to satisfy all customers to the greatest extent!
If for any reason you are not satisfied with an item please contact us before taking any further action and we will do our best to solve the issue at hand.
- The buyer must notifyAFreshBuy though messaging system (or email)of any problem within the documented warranty period to qualify for refund or replacement.AFreshBuyis not obligated to offer warranty services beyond the 30-Day warranty period.
- Return Authorization (RMA)is required for defective product returns. Credit for returned item will be issued after the return of the defective product.
- Upon receipt of Return Authorization, the buyer has 3 Business Days to ship item to us and provide tracking number via e-mail.AFreshBuy-bdoes not issue refunds for any form of shipping, either to or from the buyer.
- Items that are damaged while in the buyer\'s possession, regardless of circumstances, do not qualify for a refund or exchange. In addition, items damaged by improper packaging when returned to AFreshBuy will not qualify for refund or exchange.
- Items with Warranty: We affix \"warranty labels\" on all items that have a warranty. Evidence of tampering, removal or broken seal, willVOIDthe warranty.
Item Location (For Company Use)Item 120318-03RTLocation: STOCKTON, CA
