Integrated Board Super X9DRFF-7+ Key Features
4 Hot-plug System Nodes in 4U
Front I/O. Each node supports: 1. Intel® Xeon® processor E5-2600
family; QPI up to 8GT/s 2. Up to 512GB DDR3 1600MHz ECC
Registered DIMM; 16x DIMM sockets 3. 1 PCI-E 3.0 x16 (LP), 1 PCI-E 3.0 x8
(LP) and 1 PCI-E 2.0 x4 (LP) 4. Front I/O ports: 2 GbE LAN, 2 USB 2.0,
and 1 VGA connector 5. Built-in Server management tool
(IPMI 2.0, KVM/media over LAN) with
dedicated LAN port 6. 2x 3.5\" Hot-swap SAS/SATA HDDs;
SAS2 via LSI 2208 7. 1280W Redundant Power Supplies
Platinum Level (95%)
Available Colors: Black
Drivers & Utilities BIOS IPMI Tested MEM Tested HDD
OS Certification Matrix
Product SKUs SYS-F627R3-F72+
- SuperServer F627R3-F72+ (Black)
Motherboard
Super X9DRFF-7+ Processor/Cache CPU
- Intel® Xeon® processor E5-2600 (up to 135W TDP *)
- Dual Socket R (LGA 2011)
* Please contact your Supermicro sales representative for additional details Cache
System Bus
System Memory (per node) Memory Capacity
- 16x 240-pin DDR3 DIMM sockets
- Supports up to 512 GB DDR3 ECC Registered memory (RDIMM)
- Supports up to 128 GB DDR3 ECC Un-Buffered memory (UDIMM)
Memory Type
- 1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
- 32GB, 16GB, 8GB, 4GB, 2GB, 1GB
Memory Voltage
Error Detection
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
On-Board Devices Chipset
AHCI SATA
- SATA 2.0 3Gbps with RAID 0, 1, 5, 10
- SATA 3.0 6Gbps with RAID 0, 1
SAS
- SAS2 (6Gbps) via LSI 2208
- HW RAID 0, 1, 5, 6, 10, 50, 60 support
IPMI
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Nuvoton WPCM450 BMC
Network Controllers
- Intel® i350 Dual Port Gigabit Ethernet
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201F PHY (dedicated IPMI)
Graphics
Input / Output (per node) SAS
LAN
- 2x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
USB
VGA
Serial Port / Header
Chassis Form Factor
Model
Dimensions Width
Height
Depth
Weight
- Net Weight: 105 lbs (47.63 kg)
- Gross Weight: 150 lbs (68.04 kg)
Available Colors
Front Panel Buttons
- Power On/Off button
- System Reset button
LEDs
- Power status LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
- Power fail LED
Expansion Slots (per node) PCI-Express
- 1 PCI-E 3.0 x16 (LP)
- 1 PCI-E 3.0 x8 (LP)
- 1 PCI-E 2.0 x4 (LP)
Drive Bays (per node) Hot-swap
- 2x 3.5\" Hot-swap SAS/SATA HDD trays
Backplane 1x SAS2 / SATA backplane System Cooling Fans
- 8x 8cm heavy duty fans with air shroud and PWM fan speed control
Power Supply 1280W Redundant High-efficiency Digital Power Supplies w/ PMBus 1.2 AC Input
- 1000W Output @ 100-140V, 12-8A, 50-60Hz
- 1280W Output @ 180-240V, 8-6A, 50-60Hz
DC Output
- 1000W: +12V/83A; +5Vsb/4A
- 1280W: +12V/106.7A, +5Vsb/4A
Certification
Platinum Certified
[ Test Report ] System BIOS BIOS Type
- 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
- Plug and Play (PnP)
- APM 1.2
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
- UEFI
Operating Environment / Compliance RoHS
Environmental Spec.
- Operating Temperature:
10°C to 35°C (50°F to 95°F) - Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F) - Operating Relative Humidity:
8% to 90% (non-condensing) - Non-operating Relative Humidity:
5% to 95% (non-condensing)
See Parts List Parts List - (Items Included) Part Number Qty Description Motherboard / Chassis MBD-X9DRFF-7+
CSE-F424AL-R1K28B 4
1 Super X9DRFF-7+ Motherboard
4U Chassis Backplane BPN-ADP-F418L-O-P 4 Fat Twin Mid-plane Backplane BPN-SAS-F424-A2 4 2x 3.5 Cable 1 CBL-0460L-01 4 8 pin Male to two 4 pin Male power cable. 40cm and 45cm. 18AWG Cable 2 CBL-0473L 8 21cm 30AWG SATA S-S cable Heatsink / Retention SNK-P0048PS 8 2U Passive CPU Heat Sink for X9 Generation Motherboards w/ Narrow ILM Power Supply PWS-1K28P-SQ 4 1U 1280W, redundant single output power supply
Terms and Conditions
Hours of Operation
Our business hours are 10am to 5pm PST Monday through Friday. All email requests will be addressed within 24 hours.
Returns or Exchanges
Returns postmarked within 30 days of the delivery of the original shipment will be accepted with 20% restocking fee, no returns allowed after 30 days. All returns must be approved by SMCI Express’ Customer Relations who will issue a Return Merchandise Authorization (RMA) number. If the item is defective and is under warranty, please contact us and we will assist you in pursuing a warranty claim with the manufacturer.
Payment
We proudly accept PayPal. If another form of payment needs to be used please contact us first. We can work with most payment methods. California residents will be charged 8.25% sales tax.
Shipping Info
We ship items worldwide, including APO / AEO address, via Fedex or US Postal Service. Items will be shipped within 2 business days upon receiving payment although in most cases they are shipped same or next day. Feel free to email us to confirm product availability and shipping date.
On May-18-12 at 01:08:38 PDT, seller added the following information: