UBB Store


SBC LINUX PC Compact Flash Boot Ethernet VGA USB IDE LCD/TFT support PC/104 bus For Sale


SBC LINUX PC Compact Flash Boot Ethernet VGA USB IDE LCD/TFT support PC/104 bus

This item has been viewed 281 times.

SBC LINUX PC Compact Flash Boot Ethernet VGA USB IDE LCD/TFT support PC/104 bus:
$495

WORKING SBC WITH LINUX OS, CF CARD Reader and Boot Flahs card, POWER SUPPLY, CHASSIS, VGA & keyboard cables
Chassis size: 7.5"x8 3/8"x1.5"Module Features• CPU features♦ Ultra Low Voltage Intel 400MHz Celeron processor♦ Front Side Bus (FSB) speed of 100MHz♦ 256kB L2 Cache on the chip• Memory♦ 256MB standard SDRAM soldered on the board♦ 100MHz Clock Speed♦ 512kB boot block Flash device• Interface Buses♦ PC/104 and PC/104-Plus Bus Interfaces♦ PC/104 Bus speeds up to 8MHz (16-bit ISA Bus)♦ PC/104-Plus Bus speed at 33MHz (32-bit PCI Bus)♦ PCI 2.2 compliant• IDE Interface♦ Supports two enhanced IDE devices♦ Supports single master mode♦ Supports Ultra DMA 100/66/33 in master mode♦ Supports ATAPI and DVD peripherals♦ Supports IDE native and ATA compatibility modes• CompactFlash Adapter Socket♦ Supports Type I or Type II PC cards♦ Supports IDE CompactFlash card♦ Supports bootable CompactFlash card♦ Supports primary IDE with Master/Slave jumper♦ Supports +3.3V or +5V PC cards (voltage selection jumper)• Utility Interface♦ Floppy Disk Interface• Supports one floppy drive (Shared with Parallel Port)• Supports all standard PC/AT formats: 360kB, 1.2MB, 720kB, 1.44MB, 2.88MB♦ Parallel Port Interface• Supports standard printer port (Shared with Floppy Disk Drive Port)• Supports IEEE standard 1284 protocols, and EPP, ECP outputs• Bi-directional data lines• Supports 16 byte FIFO for ECP mode.♦ Serial Port Interface• Supports two RS232 serial ports with full handshaking• Port 1 supports full modem capability and RS485• Provides 16550-equivalent controllers• Supports two 16-byte FIFO buffer• Supports programmable word length, stop bits, and parity• Supports 16-bit programmable baud-rate generator• Supports an interrupt generator♦ USB Port Interface• Supports one root USB hub• Supports two USB ports• Supports USB V1.1 and Universal OHCI v1.1♦ PS/2 Keyboard and PS/2 Mouse Interface♦ Supports external battery for Real Time Clock operation♦ Supports standard PC speaker port with 0.1 watt output drive♦ Supports a Reset switch for system reset• Ethernet Interface♦ Intel 82551ER Controller chip♦ Supports on Ethernet port♦ Supports IEEE 802.3 10BaseT/100BaseTX compatible physical layer♦ Supports Auto-negotiation for speed, duplex mode, and flow control♦ Supports full duplex or half-duplex mode• Full-duplex mode supports transmit and receive frames simultaneously• Supports IEEE 802.3x Flow control in full duplex mode• Half-duplex mode supports enhance proprietary collision reduction mode♦ Requires an external isolation transformer• Video Interfaces (CRT/LCD)♦ Support CRT (1600 x 1200 x 24) with 32MB SMA (Shared Memory Area)♦ AGP 4X graphics♦ Compliant with Rev 2.0 of AGP Interface♦ 24-bit flat panel outputs (LCD/TFT)• Miscellaneous♦ Real-time clock (RTC) with external replaceable battery♦ Battery-less boot♦ Oops! Jumper support♦ Serial Console support♦ Watchdog Timer♦ Splash Screen

Buy Now


Other Related Items:



RASPBERRY PI 2 V1.2 - Model B. 1GB RAM, Quad Core CPU (Worldwide Free Shipping)
RASPBERRY PI 2 V1.2 - Model B. 1GB RAM, Quad Core CPU (Worldwide Free Shipping)


SIM900 Quad-band GSM/GPRS Shield for Arduino UNO/MEGA/Leonardo
SIM900 Quad-band GSM/GPRS Shield for Arduino UNO/MEGA/Leonardo


RASPBERRY PI 2 - Model B. 1GB RAM, Quad Core CPU
RASPBERRY PI 2 - Model B. 1GB RAM, Quad Core CPU


Premium FLIRC Raspberry Pi Case (Pi3B & Pi3B+)
Premium FLIRC Raspberry Pi Case (Pi3B & Pi3B+)


Premium Case for Raspberry Pi Official 7
Premium Case for Raspberry Pi Official 7" Touchscreen


Raspberry Pi CNC Hat V2.60 - GRBL v1.1 Compatable - Uses Pololu Stepper Drivers
Raspberry Pi CNC Hat V2.60 - GRBL v1.1 Compatable - Uses Pololu Stepper Drivers


Raspberry Pi 3 - Model B - Brand New 2016 Wifi + Bluetooth 64bit 1.2GHz QuadCore
Raspberry Pi 3 - Model B - Brand New 2016 Wifi + Bluetooth 64bit 1.2GHz QuadCore


Ham It Up v1.3: RF Upconverter For SDR (HackRF, RTL-SDR); MF/HF Converter R820T2
Ham It Up v1.3: RF Upconverter For SDR (HackRF, RTL-SDR); MF/HF Converter R820T2


Raspberry Pi 3 Model B 1GB Quad Core 1.2GHz 64bit CPU Wifi Bluetooth Starter Kit
Raspberry Pi 3 Model B 1GB Quad Core 1.2GHz 64bit CPU Wifi Bluetooth Starter Kit