UBB Store

Vintage Texas Instruments Ti HSM III Tester Tool 980B Computer LOADED * Unit # 3
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Vintage Texas Instruments Ti HSM III Tester Tool 980B Computer LOADED * Unit # 3
Price: US $7500.00
Vintage Texas Instruments Ti HSM III Tester Tool 980B Computer LOADED * Unit #3We\'ve uploaded 10 pictures to this listing so you can get a good idea of everything included.
Serial Number: 479
Date Manufactured: 11-12-79
We powered this unit on but past that we have no idea how to test it. So we are selling it as is.
Now for the good stuff: Also yes the unit has both side panels as well.The Ti 980B computer comes configured with the following
CPU Power Supply PN 943679-0001
Front Chassis Boards:
SLOT CP Control Panel Board ASSY 960740-0002W / BOARD NO 960741-0001 (F) / LOGIC NO 960742F
SLOT MC Memory Controller Board 943858-0001 / BOARD NO 943858 / ASSY 943857-001 AB / PWB 943858-1 (G)
Rear CPU Chassis Boards:
DMA Interface Board ASSY 966390-000-2 / BOARD NO 966391-0001 E / DIAGRAM NO 966392-9901
I/O Board ASSY 960757-0001 D / BOARD NO 960758-0001D
980A Vectored Interrupt Board 01-30235-003 J
980A Vectored Interrupt Board 01-30235-003 J
DMA FOR BTC Board 01-30428-704 A
LITR980 Board 01-30748-904 A
Silkscreen 01-30656-800 / 01-306056-804
FG Control Board 01-30259-103 D
FT Control Board 01-30259-303 D
LDM/ADC Control Board 01-30259-203 C
Front Panel Interface Board 01-30259-003 E
HSM Timing & Control Board 01-30259-403 B
New BTC Board 01-30428-604Main Front Lower Chassis Boards: (top to bottom / left to right)
Set of 5 cards attached to backplane board
1. 01-14401–203
2. DA-14 Bit 01-30260-203 C
3. 01-14401-403
4. 207518-0001 VS F/GEN
5. 207517-0001 / 14401-103DSet of 5 cards attached to backplane board
1. 01-14401–203
2. DA-14 Bit 01-30260-203 C
3. 01-14401-403 E VS
4. 01-14401-303E
5. 01-14401-103DSet of 5 cards attached to backplane board
1. 01-14401–203
2. DA-14 Bit 01-30260-203 D
3. 01-14401-403 E VS
4. 01-14401-303E
5. 01-14401-103DSet of 5 cards attached to backplane board
1. 01-14401–203
2. DA-14 Bit 01-30260-203 C
3. 01-14401-303E
4. 01-14401-403 E VS
5. 01-14401-103Set of 2 cards attached to backplane board
1. 01-14407-203A
2. 01-14407-103ASet of 3 cards attached to backplane board
1. 01-14406-203B
2. 01-14406-303B
3. 01-11406-103DSet of 5 cards attached to backplane board
1. 01-14402-203D
2. DA-14 Bit 01-30260-203 B
3. 01-14402-403D
4. 01-14402-303D
5. 01-14401-103ASet of 5 cards attached to backplane board
1. 01-14402-203D
2. DA-14 Bit 01-30260-203 C
3. 01-14402-403D
4. 01-14402-303D
5. 01-14401-103ASet of 5 cards attached to backplane board
1. 01-14403-203
2. 01-30260-203C
3. 01-30260-203C
4. 01-14403-303E
5. 01-14403-103C CP HSM 2Set of 5 cards attached to backplane board
1. 01-14403-203
2. DA-14 Bit 01-30260-203 D
3. DA-14 Bit 01-30260-203 D
4. 01-14403-303E
5. 01-14403-103D CLOCK PULSE GENERATOR HSM 2Set of 4 cards attached to backplane board
1. 01-14405-103B
2. DA-14 Bit 01-30260-203 C
3. 01-14405-303B MC BOOSTER
4. 01-14405-203D MCPGSet of 4 cards attached to backplane board
1. 01-14404-203C
2. 01-14404-403B
3. 01-14404-303B
4. 01-14404-103BSet of 4 cards attached to backplane board
1. 01-14404-203C
2. 01-14404-403B
3. 01-14404-303B
4. 01-14404-103BThis front lower backplane assembly folds down, then there are tons of additional boards as well inside the rear of the unit. Take a look at pictures 5 & 6.Then there is another single backplane chassis in the rear just about center
From left to right, the boards there are...
See pic 901-13354-003A
01-14466-003A
HIC Board
CARD 207439-0001 / ASSY 207440-0001
HIC Board
Power Out Buffer 01-301126-603
Power Out Buffer OR Board 01-30126-503
QTY 4 I/O Paddle Boards 01-30260-903A----Free local pickup
or
Buyer must arrange and pay for freight shipping.Pallet Dimensions
40x34x80 (LxWxH)
Total Weight 750lbsYou can use your own freight company or go through FreightCenter or Freight-quote, etc.We will get everything completely ready for pickup.
Cris-cross banded on a pallet, chucked all 4 sides and shrink wrapped black.We will need the BOL Bill of Lading in advance of the pickup to be able to release the product to the correct driver.Our building is a commercial warehouse with multiple dock high truck docks.
Any questions, feel welcome to email us!


Buy Now