I have put together a nice component kit that will allow easy calibration of your B&K tube tester(s). These are hard to find values, especially at their ratings. These are not cheap parts by any-means! This kit will last the rest of your solder slinging, restoration days which is the only way we do things here at G1217. Calibration instructions are available upon request for the B&K700, 707 and 747 with this kit. Just email which tested you have and we will link you to our PDF guide!
This kit purchase comes with:
- 1uF 400V Vishay Film capacitor
- 10K Dale wirewound 5w 1% resistor
- 1Mohm Dale wirewound 4w 1% resistor (If you would like 2Mohm for sensitivity, we do have one available in a lower 2w power rating - still more than OK - just let me know)
- 10Mohm Dale wirewound 4w 1% resistor
- 20Mohm Dale wirewound 4w 1% resistor
- 100Mohm Dale wirewound 4w 1% resistor
- Straight ground pin with loop
- All pins come pre-soldered with machine turned gold contact pins to prevent tube socket damageSkill level:
- This kit is for experienced electronic techs with restoration experience
- If you have not worked with high voltage AC electronics, DEATH by electrocution is highly possibly when calibrating What we recommend:
- We recommend you start with a known working tube tester
- We recommend SAFE working conditions
- We recommend all contacts and wire wound trimmers be cleaned with Deoxit D5 during restoration
- We recommend you have adequate knowledge of electronic restoration prior to installing this kit!We are not responsible for:
- Cooking or killing yourself during calibration because you really do not know what you are doing. We have plenty of warnings - experienced techs only!
- Frying your tube tester. These parts work perfectly. You goof it up - it is on youYes, we can clean and calibrate your tester for an additional cost + shipping. Just shoot us a message!Feel free to contact us with any questions prior to purchase. We are here to help!