UBB Store

DIGITAL 10,000 440 Amp Solar / Wind charge controller 12 volt ADG type NO BASE
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
DIGITAL 10,000 440 Amp Solar / Wind charge controller 12 volt ADG type NO BASE
Price: US $45.99

Solar Controller Diversion load regulator Charge regulatorCharge controller Battery regulator 12 volt 24 volt 48 VDC volt windpower charge controller renewable energy dump load diversion load440 AMP WIND / SOLAR12 VOLT / 10,000 WATT BATTERY CONTROLLER
Fully programmable for any voltage from 14.4 to 12.2
(recommended 14.4 to 13.6 for long battery life)

We sell really great wind turbines too: LINKHERE

FULLY ASSEMBLED AND PROGRAMMED READY TO GO!

BRAND NEW ADG type BATTERY REGULATOR WITHOUT BASE
(With Original \"THEM\" Thermodyne Controller. Says THER on the board. Made with real high voltage rated parts.
Some people claim Thermodyne made but only boards stamped \"THER\" are genuine Thermodyne boards)

WIND/SOLAR 12 VOLT440 AMP DUMP / DISCONNECT CHARGE CONTROLLER

WITH BUILT IN DIGITAL DISPLAY AND INTELLIGENT DUAL PROCESSOR CONTROLLER

Basic Video\'s on how dump and diversion loads work and operate using our automatic SEA440

Uses the same basic principle only the ADG in this ad has adjustable voltage settings.

DUMP MODE 12 volt only
CUT MODE 12 volt only


Battery regulator for both your wind and solar battery input power. This
regulator can either dump extra power creating free hot water or heat or
just cut off extra power to keep your batteries from over charging. This
unit is a must for wind turbine applications as it uses a mechanical
relay which can handle high voltage surges unlike solid state controllers.


15 years of great products


This item is the only controller that will work with wind turbines Do not buy solid state controllers as they will burn out in high wind conditions. This controller was specially developed for wind turbines. Also works on solar too - Get one battery controller to do it all!
WorldsLowest Cost 440AMPWind& Solar Controller
  • Battery Regulator-
  • Cut/Disconnect Controller-
  • Diversion LoadRegulation-

For solar panels and solar


LOWEST COST 440 AMP CHARGE OR DIVERT CONTROLLER WITH DIGITAL DISPLAYON THE MARKET


Max solar amperage in divert (dump) mode is 440 amps. This is a big hybrid wind and solar charge controller.
Use for wind or solar or both at the same time! Also use for hydroelectric or solar or both.
User changeable settings -- Several controllers on the market only let you set the dump level!
Connect multiple turbines and solar panels up to 440 amps worth at the same time!
Max continuous solar amperage in disconnect mode is 100 amps.


Can divert the charging source from the batteries to the load, or dump both the batteries along with the charging source.
You can connect both wind and solar at the same time.Reverse polarity protection
Ultra low power consumption even with the volt meter on (almost negligible). You can even set the volt meter to turn off after in-activity.

On board relay- Isolates electronics from back voltage spikes from large 440 amp relay.

This is important to get the longest life out of the electronics. No body else has this!

Dual (2) Microprocessor controlled -- Extremely stable and very accurate

Multiple user changeable settings, and trip points for many various system requirements and applications- You can change the dump point voltage level,

end of dump voltage level, length of time in divert mode when end dump point voltage is reached

Isolated Electronics Protection - Impossible to accidentally connect wind or solar directly to the circuit board.

High amp rating - 440 amps, 10,000 watts surge peak max.

Battery Status digital - Lets you know your battery\'s actual voltage in real time!

Plug and Play - Long leads for easy termination to your 12 volt battery or battery bank.

WorldsLowest Cost 440AMPWind& Solar Controller
  • Battery Regulator-
  • Cut/Disconnect Controller-
  • Diversion LoadRegulation-
This controllercan divert or simply disconnectincomingpower withoutan electrical arc occurring -

HOWPOWER DRAW DYNAMICS WORKS:

ThisHigh Amp unit cancontrol 12 wind turbines or 40 solar panels !Used to prevent battery overchargingonWind -Solar - HydroAbattery regulator divertsexcess power to powersomeother useful devicewhen ever your battery is full.Usethe this excess powerto make free hot water or torecharge an auxiliarybattery bank, so many uses!

Has push button load tester.

Anextremely robustunit!
drawsalmost ZERO power whilesensing! 99.998%electrically efficientwhile sensing!
  • Battery regulator.
  • Charge regulator.
  • Charge controller.
  • Dump load regulator.
  • \"Cut\" charge controller.
  • Diversion loadregulator.
  • Micro processorcontrolled.
  • Versatile raised steelmounting plate.
  • Measures10\" long by 7\" wide by 3\" tall.
  • Works for all WindTurbines, Solar panels andHydro.
  • For all voltagesranges in multiple batterybanks.
  • No grounded IGBT\'s or MOSFETS -Lighting strike proofisolation.
  • CUT -LOAD controller (No need to buy a dump load Draws only tracepower while sensing!
  • Does not wasteelectricity while sensingin diversion load mode!

HOWPOWER DRAW DYNAMICS WORKS:
If you use it as a DIVERSION or DUMP load MODE then it uses nopower when it is NOT dumping (energyefficientsensing)


The modern way tomonitor your battery from over chargingis to have a diversion load that performs another task such asheating water when your battery is in danger of over charging.Shutting down the output of your wind turbine or your other renewableenergy devices is old school thinking. Now-a-days most peopledump their excess power into some other legitimate device optimizingtheir energy independence. Hot water from your excess power canbe used for radiant heating in the winter or even in the hotsummer months for washing cloths or dishes and for bathing. Youwill always find a need for hot water in your life.Extraheavy duty continuousduty relay that can handle millions
of cycles at very high amploads without fusing together or sticking! -
\"Electromechanicalunits ours are impervious to lighting, EMP and static electricaldischarges\"
\"Simpleand ultra-reliable\"- \"A BULLET PROOF SYSTEM\" CUT MODE OPERATIONThree Phase Rectifier foronly $12.00 LINKHERE





Buy Now