IN-14 Nixie Tubes Clock Shield for Arduino UNO or MEGA - NCS314 HW v2.3
Item will be delivered by UPS fast delivery within 3-5 business days
Same day shipping

The Arduino Nixie Tubes Shiled NCS314 allow you to make 6 digits Nixie Tubes Clock in “Divergence Meter Mini” style (by GRA & AFCH).

Or you can just display any 6 digits strings on this IN-14 Nixie Tubes made in xUSSR.

Hundreds of thousands of Arduino Boards are already fueling people’s creativity all over the world, everyday.

PCB design, schematic, housing and software made by GRA & AFCH.

Nixie Clock Shield NCS314 compatible with Arduino UNO/Genuino & Arduino MEGA.

Sso it allows you to write your own unique programs on the Arduino platform.

The latest sources are always available on github at the NixeTubesShieldNCS314 repository.

The base listing contains only BARE PCB and full set of electronics parts

Without Arduino, columns and power supply

This is example of assembled board NCS314 with full complectation

This listing contains bare board to make shield NCS314 with soldered Nixie Tubes IN-14 and IN-3 neon lamps:

• Bare NCS314 board – 1pc
• IN-14 Nixie Tubes – 6pcs
• IN-3 Neon lamps – 2pcs
• Set of electronics parts
• Set of hex spacers and screws
• User manual on vintage-style paper
• Paper electrical scheme

This listing does NOT contain the Arduino Board and Power Supply

• We are selling already flashed Arduino UNO here: (Uno) Arduino Mega here: (Mega) supplies: Acrylic Case ACNS314 v3.3 at a price of $ 34.95 Column: Receiver GA-6: Remote Controller RM-X153: style=\"box-sizing: inherit; margin-bottom: 2.4rem; margin-top: 0;\">…And upload software into your arduino
  • Link to (software) style=\"box-sizing: inherit;\">Link to (video tutorial)
  Our Benefits:
  • Easy to build beautiful clock – we offer housing
  • Easy to customize firmware under Your own needs, thanks to an open platform – Arduino.
  • Fast uploading via USB
  • The latest version of the firmware always available on GitHub
  • No need to download drivers – we are use only Genuine USB to serial converters. Drivers for them pre-installed in all popular OS: Windows, MacOS, Linux.
  • Human friendly menu
  • Very high qualty of Printed Circuit Boards
  • Japan alluminium capacitors
  • Power-On Self-Test
  • Technical support
  Dear customers!
  If you have ANY questions, (PLEASE ASK us).Software Features:
  • Shiled support 6 IN-14 Nixie tubes [hh:mm:ss]
  • Full static display mode
  • Slote Machine (Ani poisoning)
  • Temperature display (DS18B20) [Celsius or Fahrenheit]
  • GPS time synchronization (requires a standard GPS receiver, NMEA protocol, 5 volt power supply, not included)
  • Operation via IR remote control (Remote control Sony RM-X151, not included)
  • No need refresh or update information on the tubes
  • The maximum possible brightness of the tubes
  • 12/24 hour format.
  • Date format: DD:MM:YY
  • Unique RGB LEDs backlight with 16,7 million colors.
  • Very easy to switch LEDS off/on.
  • As alarm sound clock uses standard RTTTL (Nokia format) melodies, so You can easy change it. (included songs: mission impossible, we wish you).
  • Easy updating firmware via USB using Arduino IDE.
  • Power On Self-Test (POST): LEDs test, tubes test, sound test.
  
  Hardware Features:
  • Integrated High Voltage Power supply: 150 – 220V.
  • 3 PWM channels for RGB LEDs 8 bit per channel = 24bit = 16,7 million colors. It can be disabled in the menu (see manual).
  • Test points for testing, adjusting and controlling low and high voltage circuits.
  • Internal buzzer.
  • RTC (Real Time Clock) High precision time chip DS3231 with Backup battery
  • Acquiring time via external GPS module (only with Arduino Mega)
  • 3 buttons on board to control
  • Potenciometer to adjust High Voltage
  • IR reciver TSOP4836 for IR remote controllers (may conflict with “Tone” library)
  • Temperature sensor DS18B20
  • 8 pcs of RGB SMD LEDs
  • SPI up to 4Mhz
  • Places for 2 column with 2 neon dots inside
  • Separate controls upper and lower dots.
  • Power consumption: 12V, 760mA. Recommended: 12V, 1-2A (center pin positive +)
  • Reverse polarity protection
  • Nixie Tubes Shiled NCS314 PCB size: 200mm x 53.34mm. (7.87 x 1.2 in)
  
  Shields comparison photos of KIT:Arduino Nixie Tubes Clock Shield NCS314 Top ViewArduino Nixie Tubes Clock Shield NCS314 bottom View Boards Dimensions in 2D and 3D
  Nixie Tubes Clock Shield for Arduino NCS314 – Photo Gallery:This is example of assembled board NCS314 – complete SetThe base listing contains only BARE PCB and full set of electronics parts (Arduino, Columns and Power Supply are EXCLUDED from set).User ManualDear customers!
  If you haveANYquestions,PLEASE ASK us

  
  

  
  

  
  

  Shipping and Return information

  
  

  All Items are shipped from Ukraine
  Via International registered Airmail
  Shipments are made within 1 business day
  After the payments are received and verified
  It takes about 4-7 days via UPS Express delivery
  It takes about 10-18 days via Standerd shipping
  It takes about 35-45 days via Economy shipping
  We combine multiple Items to save on shipping

  
  

  
  

  UPS Express Shipping time (recommended):Europe:3-5 daysGermany:3-5 daysUSA, Canada:4-7 daysAsia, South America:5-7 daysAustralia, New Zeland:5-7 daysAfrica, Central America:5-7 days

  
  

  
  

  Standard Shipping time:Europe:10-12 daysGermany:10-12 daysUSA, Canada:10-15 daysAsia, South America:10-18 daysAustralia, New Zeland:12-18 daysAfrica, Central America:12-18 days

  
  

  
  

  Economy Shipping time:Europe:25-30 daysGermany:25-30 daysUSA, Canada:30-35 daysAsia, South America:35-45 daysAustralia, New Zeland:45-55 daysAfrica, Central America:45-55 days

  
  

  
  

  
  

  Return Policy

  All Returns are accepted

  • For Return you should contact Us within14 Daysafter receiving the Item
  • Refunds are made as Money back or Replacements (buyer’s choice)
  • Return Shipments are paid by the buyer
  • No restocking fees are charged