UBB Store

(HDMI+DVI+VGA) Driver LVDS Inverter Kit - Convert a Bare Laptop LCD into Monitor
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
(HDMI+DVI+VGA) Driver LVDS Inverter Kit - Convert a Bare Laptop LCD into Monitor
Price: CN $25.54
M.NT68676.2A(HDMI+DVI+VGA+Audio) LCD/LED Screen Controller Board Diy Monitor Kit
Product Description

This is a great set ofeasy-reassemblingLCD controller kit which is used to turn a bare LCD panel into a desktop/PC monitor. It will be a surprise that your bare LCD will be of good use, and no longer be a waste. Or it is a very insteresting things that we make a monitor successfully byourselves. Itsupportsmost of the LCD panel from 12.1\" to 55\" with a LVDS interface and a resolution lower than 2048X1152,plug&play kit, no need soldering.

Please remember to leave us your LCD Model Number when placing the order, it is very import for us to prepare the right kit for you.

Necessary Accessories for turning a bare LCD to desktop monitor:LCD Controller board, Inverter, LVDS cable, Keypad, VGA cable/DVI Cable/HDMI cable, Power Adapter. If you have already had a VGA cable/DVI cable/HDMI cableand a power adapter (Ouput 12V,4A -- it is for small size lcd from 10.1inch to 19inch), this kit is a great choice for you, else there are some other kind of kits for options in our store,click here.

LCD Controller is a monitor control board, which can support LED/LCD panels. It can support resolution up to 2048X1152.M.NT68676.2A can synchronize with computer automatically. Synchronization requires the synchronous signal which horizontal and vertical sync are separated.M.NT68676.2A can support dynamic contrast control, headphone input and digital volume control simultaneously.

Size of controller board: the inverter for your lcd is not among these three inverters, the price will be higher, hope for your understanding.

Have a try and you will get great surprise!

Then, are you going to get this kit?

Important Steps to Process your order with this kit:

Step 1:Please provide your LCD panel model no. by sending us the message before offerding this item, so that we can advise a right kit for your LCD. (Usually, the model no. can be found on a sticker on the back of the LCD panel. If needed, disassemble the plastic shell and you will find the sticker). If possible, please give us as more specification of your LCD as you can. Then wait for our reply.

Step 2: We will give you the reply as soon as possible after carefully selecting and testing the kit by our technical support, and then you can place the order, and pay for it. We will send the package via HongKong Post as soon as possible after cleared payment. (If you prefer express shipping, please contact us to pay additional shipping cost before payment.)

Step 3: Waiting for the package.

We will write corresponding program into the lcd controller board to match your LCD, so this kit will match against one very specific LCD Panel or others that have exactly the samespecification.However, a programmer could help on different LCDs, that is, change the firmware of the LCD controller board by yourself. Be aware that differentLVDS cables and Inverters will be needed to matchdifferent LCDs.

Notes:

1. Please make sure that your LCD is ok before offerding this item, else you will be responsible for the incompatibility.

2.If you concern much about resolution setting, please reconsider before offerding!

3.We will try our best to prepare the right kit for you, such as writing the corresponding program into the controller board, selecting the suitable LVDS cable and the suitable inverter. But as we don\'t have an LCDexactlyas yours at hand, we can just test the controller with our own LCD. For yours, you need to test it yourself to check if it works well or not. As you know, there are so many LCDs with many varieties in the market, sometimes we can\'t promise the exact compatibility. Please consider it before offerding! However, we have gained many success in preparing the kit for our customers in real store. So why not have a try to get surprise!

4.If you are not specialized in electronics or have doubts inoperation, please contact us for instruction, as we are not able to responsible for wrong operation.

5.After finishing the connecting, please don\'t rush to power on! First, use multi-meter to test whether the GND of the LCD is connected with the GND of the controller board. If not, please check the connection again. If yes, please test whether there is a short circuit between the red wires and black wires of the LVDS cable. If there is a short circuit, it means opposite connection or other errors. Any problem, please feel free to contact us. DIY needs a certain professional knowledge, please kindly take the responsibility of the risk.No metal contact is allowed when powering on the controller board, otherwise short circuit may occur, which may cause unavailability of the controller board.


Portugal Friend jcag1986\'s project connected to PS3:

American Friend cryalith\'s Raspberry PI Friend beyelka\'s Project:


Successful Example (rossg77 -- an American friend\'s Project ):


Successful Example (radicalboy_fr -- a French friend\'s Project ):

Successful Example (docpot2008 -- a Canadian friend\'s Project ):


Malta Friend drac1977\'s Project:


USA Friend loafer_tingo\'s Project :


Instruction to connect the controller board to the LCD:click here):


1. Take away the old inverter and old LVDS cable from the LCD panel.

2. Connect the new inverter and LVDS cable to your LCD panel.

3. Connect controller board with PC by VGA cable.

4. Input power of 12V,4A. ( Please don\'t revised the voltage jumper setting on the lcd controller board before confirmation from us, because wrong revising of this voltage will get your lcd burnt. By the way, please don\'t connect the lvds cable wrongly, some wrong connecton can get your lcd burnt too, if you are not sure, please feel free to contact us.)

We have collected a few of the model no. in the following table which we have gained success forreference. However, no matter your model no. is listed in the table or not, welcome to contact us for more details, we probably will be able to find the solution for you as we are located in a huge electronic market in shenzhen, China. V.0 B154EW01 V.0B170PW03 V.0 LP154WU1-A1K1 B121EW01 V.1 B154EW01 V.1B170PW03 V.1 LP154WU1-A1K2 B121EW01 V.2 B154EW01 V.2B170PW03 V.2 LP154WU1-A1K3 B121EW01 V.3 B154EW01 V.3B170PW03 V.3 LP154WU1-TLA1 B121EW01 V.5 B154EW01 V.4B170PW03 V.4 LP154WU1-TLA2 B121EW02 V.0 B154EW01 V.5B170PW03 V.5 LP154WU1-TLB1 B121EW02 V.1 B154EW01 V.6B170PW03 V.7 LP154WU1-TLC1 B121EW03 V.0 B154EW01 V.7B170PW03 V.9 LP154WU1-TLC2 B121EW03 V.1 B154EW01 V.8B170PW05 V.4 LQ154M1LW02 B121EW03 V.3 B154EW01 V.9B170PW06 V.0 LQ154M1LW12 B121EW03 V.4 B154EW01 V.CB170PW06 V.1 LQ154M1LW1C B121EW03 V.5 B154EW02 V.0B170PW06 V.2 LQ154M1LW2A B121EW03 V.6 B154EW02 V.1B170PW06 V.3 LTN154U1-L01 B121EW03 V.7 B154EW02 V.0 B154EW02 V.1 B154EW02 REV V.2 B121EW03 V.0 B156HW02 V.0 B156HW02 V.3 B156HW02 V.2 B173RW01 V.0 B156HW02 V.1 B156HB01 LTN154X3-L09 LTN154X3-L06 LTN154X3-L05

Package Include:

  • 1 X LCD Controller Board (M.NT68676.2A)
  • 1 X Inverter
  • 1 X 5 keys Keypad
  • 1 X LVDS cable


Beside this kit,you will need to prepare the VGA cable/DVI cable/HDMI cable and power adapter yourself. Ifyou want to buy the power adapter from us too, please buy item 121059321784.

As we need to select the right inverter and lvds cable to match your lcd for you, and alsothe supplier mayupdate of the lcd controller boad a little,so theymay be not the same as that shown in the picture. Hope for your understanding.

Welcome to customize your own kit!

Payment

--We accept paypal from verified customers with a confirmed address.
--Please make the payment within 5 working days of the close of the sale. If you are offerding on several of our sales which will close on different days, please contact us and you may wait until the last sale you are watching has ended for the payment.
--If you want the item to be shipped to an address different from your account, please inform us by email before payment.

Shipping

--Item will be shipped by HONG KONG AirMail. Delivery will take 7-30 working days(excludes weekends) depends on location.
--We ship all items within one working days (Monday to Friday only) after clearance of payment excluding Saturday, Sunday and public holidays.

Notice : Customs Duties
Import taxes and Customs Duties in your country are NOT INCLUDED in the item price or shipping charges . These charges are the buyer\'s responsibility.
If you have trouble in your country\'s Customs about your parcel , please contact with us!

Warranty and Returns

We want you to be happy with our products.And your satisfactory is very important to us.
Please contact us if there are any problems and we will do my best to fix it out. Here is our misrepresented & unsatisfied merchandise policy.
-- 1. We accept returns for replacement or refund within 5 days after receipt of item(s). Items MUST be in their original condition, not worn or altered.
-- 2. We DO NOT reimburse the return shipping charge. Refunds will be for the original price paid, and will be issued within 7 business days after receipt of the return.



Buy Now