This is a cost analysis redesign of my previous Buzz Box with the primary purpose to reduce the price while still producing a quality product for you, my fellow model engine builders.

Here is a complete ready to use Buzz Box for your Hit ‘n Miss Engine. Designed and sized for model engines it certainly can be used on full size engines too.

This Buzz Box provides a powerful spark. It is a complete ignition system ready to go immediately upon receipt…just connect three wires to the knurled nut connection studs. One wire to the engine spark plug, one wire to the engine timing (points) and one wire to ground on the engine frame. I even charged the battery so it will work right out of the box.

In the Buzz Box is a refurbished set of Ford Model-T points, coil, condenser, on-off toggle switch, rechargeable 6 volt gel cell battery, and charging jack. A wall plug-in (wall wart) charger is also included (120VAC, 60Hz, 4.5W Output 6VDC @ 300mA). It will slow-charge overnight, and will not overheat the battery. My experience suggests longer life of the Ford Model-T points using a 6V rather than 12V battery.

The wood box is constructed of Pine, 9/32” thick, sealed with a clear coat of lacquer for protection, measuring 3-1/2” x 5-13/16” x 4” high. Small and compact it weighs 1.85 pounds. Note the spline reinforced miter at the corners.

For mounting to your display base, ¼”-20 threaded brass inserts are provided on the bottom. Centered and 3’’ apart, mounting is quick and easy. See photo.

Satisfaction guaranteed, if you are not pleased with the Buzz Box return to me and I will give a full refund less shipping costs.

Available at a Buy It Now price including free shipping.

.

.