waterslide decal paper --10 sheets
For White and Light-Colored Backgrounds
8.5" x 11" 5 Sheet
for Clear Waterslide Decal Paper
For Inkjet printers ONLY
With Waterslide Decal Paper, you can print any designs using an
inkjet printer and transfer them onto any non-porous surfaces. The decal
transfer is very thin and barely noticeable whentransferredonto a
surface. The decal also adheres strongly and you can hand wash thedecaleditems.
Our Waterslide decal paper is very quick and easy to use,
anybeginnerscan use them without any failure.
Glass, metal, ceramic ware (for decorative purposes), wood,
furniture, candles, soap, model airplanes, model railroads, die-cast cars,
fishing rods, picture frames, book covers, albums, and appliances are just some
examples of where inkjet Waterslide Decals may be applied.
The Clear acrylic spray is required for this paper.
HOW IT WORKS Clear
Waterslide Decal Paper
You will need: Hair Dryer, Ruler, Scissors, Tissues/Towel
STEP 1: Edit the size and shape of your image.
STEP 2: Print the image on the glossy coated side of the
STEP 3: Next, cut out the image with a pair of scissors or a craft
*If you are using the white paper, cut out very carefully around
the image, if you leave any border around the image they will appear later.
*If you are using the clear paper, you can leave a small border
around the image since it's clear, you won't be able to see it.
STEP 4: Once the decal has been cut out, place the decal into a
bowl of water left for up to 30 seconds.
*In cold weather use warm water.
*Before you place the decal on your project, wet the surface of
your project with water. This will allow you to move the image easily so you
can position it in the right place.
STEP 5: If you have soaked the decal for long enough, you will be
able o feel the backing paper and decal transfer easily slipping. (Do not
remove at this stage) Take the decal out of the water and place it facing up
onto your project. Then carefully slip the decal paper slightly and attach the
lip of the decal on the surface.
STEP 6: Then gently pull the backing of the paper away leaving the
decal transfer to stick to the surface while supporting the decal at the same
time with your other hand.
STEP 7: Once the decal has been attached to the surface, move it
around to the desired position. Once you have positioned the decal, use a
rubber scraper to remove any water or air bubbles underneath the decal
transfer. You can also use a lint free cloth to do this. You need to handle the
decal with care at this stage as it is very fragile.
STEP 8: If you leave it out to dry, the decals will dry in 3-4
*If you are working in a cold environment, we advise you to dry
the decals using a hairdryer.