UBB Store

New Raspberry Pi 512MB Model B + (B Plus) Project Board System (Made in the UK)
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
New Raspberry Pi 512MB Model B + (B Plus) Project Board System (Made in the UK)
Price: HK $39.88
2016022100150110784 2016022100150110784 New Raspberry Pi 512MB Model B + (B Plus) Project Board System (Made in the UK)

PACKAGE INCLUDES

1x Raspberry Pi 512MB - Model B+ System

  • SoC Broadcom BCM2835 (CPU, GPU, DSP, and SDRAM)
  • CPU: 700 MHz ARM1176JZF-S core (ARM11 family)
  • GPU: Broadcom VideoCore IV, OpenGL ES 2.0, 1080p30 h.264/MPEG-4 AVC high-profile decoder
  • Memory (SDRAM): 512 Megabytes (MB)
  • Video Outputs: HDMI
  • USB: 4x USB 2.0
  • GPIO: 40 Pin
  • Audio Outputs: 3.5 mm jack, HDMI
  • Onboard Storage: Micro SD Card Slot
  • 10/100 Ethernet RJ45 On Board Network
  • Storage via Micro SD Card Slot

    Compared to the Model B it has:
    • More GPIO.The GPIO header has grown to 40 pins, while retaining the same pinout for the first 26 pins as the Model B.
    • More USB.We now have 4 USB 2.0 ports, compared to 2 on the Model B, and better hotplug and overcurrent behaviour.
    • Micro SD.The old friction-fit SD card socket has been replaced with a much nicer push-push micro SD version.
    • Lower power consumption.By replacing linear regulators with switching ones we’ve reduced power consumption by between 0.5W and 1W.
    • Better audio.The audio circuit incorporates a dedicated low-noise power supply.
    • Neater form factor. We’ve aligned the USB connectors with the board edge, moved compositevideo onto the 3.5mm jack, and added four squarely-placed mounting holes.


    Payment

    We Only Accept Paypal and ship to Paypal Confirmed Address

    Free within 24 business hours of a CLEARED payment.

    We provide trackable, reliable andfree worldwide airmail with online tracking number.

    Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility.

    Returns and Exchange

    If you are unable to resolve an issue, please contact us by sending us a message via (click here) and we can help you troubleshoot.

    Returned item must be in the original condition with all original accessories, and must be returned in 30 days. No refund after that.

    Customer is responsible for the return shipping cost.

    The following products are not eligible for return and will be sent back to you at your cost and expense if received by us:

    • Any product not purchased from us.
    • Any product that is returned without all original packaging and accessories, including the retail box, manuals, and all other items originally included.
    • Any product that is returned by unclaimed or wrong receiveing address provided.

    We cannot process any returns/refunds until the original item is back in our possession.

    Contact Us

    Please contact us by sending us a message via (click here)

    Rasp Pi TroubleshootingGreat Resource for Raspberry Pi Troubleshooting
    1. Red and Green LED StayOnafter plugging in power indicates the Pi 2could not read the boot loader from the SD card.
      • The image was incorrectly flashed. Please follow thisflashing guide. We recommend usingRaspbian as the test image.
      • The image does not support the Pi 2. It does not have the required firmware and/or kernel for the Pi 2.
      • If you are using NOOBS, please make sure you extract the NOOBS zip file contentsto the root of the SD card.
      • SD card is exFAT formatted. The Pi 2 supports reading the bootloader from FAT32 partitions only.
        • MicroSDXC cards, 64GB cards, and many32GB cards are formatted to exFATfrom the factory.
        • Reduce the partition size and format it as FAT32.
      • The SD card is not supported. List of tested SD cards.
      • Some Vizio TVs have difficulty with negotiating resolution. Try a different TV or monitor or playing with the HDMI settings.
    2. SolidRainbow Colored Squareon top right corner indicates the voltage is getting low. This is not a problem by itself. If your Pi is spontaneously rebooting or hanging, it may mean that your power supply cannot deliver the current necessary.
      • The Raspberry Pi 2 will peak at700mA by itself. If you are connecting USB or other peripherals, you may need a power supply that can deliver more current.
    3. Solid Red Colored Square on the top right corner indicates that the device is over the temperature threshold.
    4. No HDMI Output with a Solid Red Light
      • The resolution can't be properly autonegotiated.Play with the HDMI settings in /boot/config.txt.
      • Your TV/Monitor does not support HDMIcommon ground. Try a 19 pin HDMI cable instead. These TVs are not safe to use with many single board computers because the "ground" pins are not truly grounded.

    Wifi Dongle:

    1. Please make sure the firmware for your device isinstalled.
    New Raspberry Pi 512MB Model B + (B Plus) Project Board System (Made in the UK)

    PACKAGE INCLUDES

    1x Raspberry Pi 512MB - Model B+ System

    • SoC Broadcom BCM2835 (CPU, GPU, DSP, and SDRAM)
    • CPU: 700 MHz ARM1176JZF-S core (ARM11 family)
    • GPU: Broadcom VideoCore IV, OpenGL ES 2.0, 1080p30 h.264/MPEG-4 AVC high-profile decoder
    • Memory (SDRAM): 512 Megabytes (MB)
    • Video Outputs: HDMI
    • USB: 4x USB 2.0
    • GPIO: 40 Pin
    • Audio Outputs: 3.5 mm jack, HDMI
    • Onboard Storage: Micro SD Card Slot
    • 10/100 Ethernet RJ45 On Board Network
    • Storage via Micro SD Card Slot

      Compared to the Model B it has:
      • More GPIO.The GPIO header has grown to 40 pins, while retaining the same pinout for the first 26 pins as the Model B.
      • More USB.We now have 4 USB 2.0 ports, compared to 2 on the Model B, and better hotplug and overcurrent behaviour.
      • Micro SD.The old friction-fit SD card socket has been replaced with a much nicer push-push micro SD version.
      • Lower power consumption.By replacing linear regulators with switching ones we’ve reduced power consumption by between 0.5W and 1W.
      • Better audio.The audio circuit incorporates a dedicated low-noise power supply.
      • Neater form factor. We’ve aligned the USB connectors with the board edge, moved compositevideo onto the 3.5mm jack, and added four squarely-placed mounting holes.


      • Payment

      • Free Shipping

      • Returns and Exchange

      • Contact Us

      • Rasp Pi Troubleshooting

      We Only Accept Paypal and ship to Paypal Confirmed Address

      FREESHIPPING

      Ship within 24 business hours of a CLEARED payment.

      We provide trackable, reliable andfree worldwide airmail with online tracking number.

      Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility.

      If you are unable to resolve an issue, please contact us by sending us a message via (click here) and we can help you troubleshoot.

      Returned item must be in the original condition with all original accessories, and must be returned in 30 days. No refund after that.

      Customer is responsible for the return shipping cost.

      The following products are not eligible for return and will be sent back to you at your cost and expense if received by us:

      • Any product not purchased from us.
      • Any product that is returned without all original packaging and accessories, including the retail box, manuals, and all other items originally included.
      • Any product that is returned by unclaimed or wrong receiveing address provided.

      We cannot process any returns/refunds until the original item is back in our possession.

      Please contact us by sending us a message via (click here)

      Great Resource for Raspberry Pi Troubleshooting
      1. Red and Green LED StayOnafter plugging in power indicates the Pi 2could not read the boot loader from the SD card.
        • The image was incorrectly flashed. Please follow thisflashing guide. We recommend usingRaspbian as the test image.
        • The image does not support the Pi 2. It does not have the required firmware and/or kernel for the Pi 2.
        • If you are using NOOBS, please make sure you extract the NOOBS zip file contentsto the root of the SD card.
        • SD card is exFAT formatted. The Pi 2 supports reading the bootloader from FAT32 partitions only.
          • MicroSDXC cards, 64GB cards, and many32GB cards are formatted to exFATfrom the factory.
          • Reduce the partition size and format it as FAT32.
        • The SD card is not supported. List of tested SD cards.
        • Some Vizio TVs have difficulty with negotiating resolution. Try a different TV or monitor or playing with the HDMI settings.
      2. SolidRainbow Colored Squareon top right corner indicates the voltage is getting low. This is not a problem by itself. If your Pi is spontaneously rebooting or hanging, it may mean that your power supply cannot deliver the current necessary.
        • The Raspberry Pi 2 will peak at700mA by itself. If you are connecting USB or other peripherals, you may need a power supply that can deliver more current.
      3. Solid Red Colored Square on the top right corner indicates that the device is over the temperature threshold.
      4. No HDMI Output with a Solid Red Light
        • The resolution can't be properly autonegotiated.Play with the HDMI settings in /boot/config.txt.
        • Your TV/Monitor does not support HDMIcommon ground. Try a 19 pin HDMI cable instead. These TVs are not safe to use with many single board computers because the "ground" pins are not truly grounded.

      Wifi Dongle:

      1. Please make sure the firmware for your device isinstalled.

      Copyright of hundredpluscom. All rights reserved.



      Powered by SoldEazy

      On Feb-20-16 at 08:16:39 PST, seller added the following information:



      Buy Now

Related Items