UBB Store

Playstation 3 PS3 Reballing repair service, One year warranty , RoHS standard
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Playstation 3 PS3 Reballing repair service, One year warranty , RoHS standard
Price: US $109.99

For All the people who have been asking for a permanent Repair for their playstation 3,

Here is your Chance to get the best professional permanent repair you are looking for, We only repair systems by reballing, reflow is a temporary fix and I don\'t use it at all, please read all the listing carefully before buying this service.

FOR OVER TEN YEARS NO OTHER SERVICE GOT EVEN CLOSE TO OUR QUALITY OF REPAIR , ITS FOR A REASON, WE ARE REALLY DOING REBALLING NOT JUST CLAIM THAT WE DO IT!!

WE DON\'T USE IR ( INFRARED ) MACHINES, OUR MACHINES ARE REAL MANUFACTURING MACHINES

You can read a lot of our customers reviews here [link removed by ]

**THIS IS THE ONLY SERVICE THAT COMPLY WITH ROHS STARNDARDS**

This service will cover the following symptoms:

*The famous YLOD yellow light of death.

* System is flashing red light.

*System does not display any video or have any other video problem like scrambled video or freezing.

* System starts normally but shuts down after 5 to 15 minutes.

*System is not displaying video through HDMI port.

*PS3 blueray drive controller board Replacement (the original controller board has to be included and never tampered with)

* PS3 is not injecting or ejecting discs.

* The system is not playing games even with the disc spinning but play the regular DVD movies or vise versa.

* system turns on but doesn\'t start and the screen stays black even if the TV detects the signal

* None of the USB ports is working and you are not able to synchronize your controller.

* System is not reading any discs.

* Hard drive is corrupted.

* Broken connectors like data cable connector on the motherboard or the power supply connector, yes I replace these plastic connectors on the motherboard if neccessary, I know it sounds very hard to be done.

* Replacing any damaged port like AV port , USB ports and HDMI port

*We now fix PS3 slim 2501 and3001 that shuts down and the power button turns completelyoff within few seconds

*

** IN THE WORST CASE WE WILL BE THE ONLY PLACE ON EARTH WHO CAN REPLACE YOUR ENTIRE MOTHERBOARD AND KEEP YOURFIRMWARE AND ALL YOUR DATA INTACT LIKE NOTHING EVER HAPPENED TO IT BY OUR FULL MOTHERBOARDTRANSPLANT ( CHECK IT OUT IN OUR OTHER ITEMS )

WHEN EVERYBODY ELSE FAIL WE WILL BE THE ONE WHO FIX IT IF THERE IS NO PHYSICAL DAMAGE TO THE ONBOARD CHIPS BY OUR MOTHERBOARD TRANSPLANT SERVICE ( WITH THAT SERVICE IT DOESN\'T MATTER IF THE GRAPHICS CHIP IS DEAD AND ALL THE MOTHERBOARD TRACES ARE DAMAGED WE STILL CAN FIX IT AND KEEP ALL YOUR DATA SAFE.

Here we offer you the repair service of your broken system at a flat rate repair for any of these problems; this service will include the following:

*Completely detach the system graphics processor from the motherboard (applies to the YLOD and No video output or other video problems including freezing), completely removing the old solder that started to crack and cause bad soldering points, clean the chip and refresh all cold points on it, same procedure will be done to the motherboard, the GPU will be Reballed using LEADFREE solder which is environmentally friendly, safe and long lasting, then it will be reattached in place to the motherboard again( MANY HAVE SAID THAT LEADED SOLDER IS BETTER, THAT HAS PROVEN TO BE UNTRUE, LEADED SOLDER REBALLING LASTS FOR ABOUT A YEAR BUT LEADFREE LASTS IN THESE SYSTEMS FOR THREE TO FIVE YEARS , THE ONLY ADVANTAGE OF LEADED SOLDER BESIDE BEING A LOT CHEAPER IS THAT IT MELTS AT A MUCH LOWER TEMPRATURE COMPARING TO LEADFREE WHICH MAKES IT MUCH EASIER TO DOFOR REPAIR TECHNICIANS BUT IT IS NOT BETTER FOR THE SYSTEM LIFE AND DURABILITY AND IT IS NOT SAFE TO THE USER KNOWING THAT IT CONTAINS LEAD WHICH IS KNOWN TO CAUSE CANCER AND THAT IS WHY ENVIRONMENTAL REGULATIONS PROHIBIT USING LEADED SOLDER IN ELECTRONIC DEVICES). this procedure is very complicated, very professional and I won\'t be able to perform it unless I am usingTOP OF THE LINE MACHINES WITH THE LATEST AVAILABLE TECHNOLOGY AND FULLY COMPUTER CONTORLLED PROCESS FOR MAXIMUM ACCURACY AND BEST RESULTS, with this procedure your system should run for many years trouble free and should even outlast a brand new system with at least double the life time due to the use of leaded solder in the reballing process( My success rate is over 99% and I have repaired more than 20000 systems using this techniquewithin the last three years( people who applied any flux to their motherboards before or tried the heat gun fixor other repair services on or local shops should not expect the same rate of success, some of these unprofissional repairs will totally kill your system specially if they use flux or unneccesarly heat too many chips on the boardinstead ofisolating the problem in a single chip and try to fix it the right way).Same reballing procedure will be applied to any particular chip that needs it to fix other problems like HDMI controller chip or firmware chip of the controller board, some controller boards don\'t have a firmware chip, I still can replace them.

*Applying a new layer of a special kind of high density thermal compound that meets the manufacturer specifications to keep your system running cool and prevent overheating.

*Fully clean the system from dust and clear allblocked ventilation holes to reduce systemtemprature and prevent future overheating.

*Extracting any disc that got trapped inside your system and you could not eject it out (please if there is a disc inside your system don?t try to take the system apart to get it out, I will get it out for you and send it back with your system , that will help reserving your disc and your drive from getting anydamage to its mechanical mechanism).

Repair parts costs if needed will be extra and you will receive a list of the needed parts if any and their costs, you will have the choice to buy and send them or let me buy them for you after your approval of their costs.

For people who suggest that YLOD is caused by a bad power supply , that is very rare , in over 20000 system that I repaired I only replaced the power supply five times, other repair shops will use that to overcharge people, I don\'t.

*95% of the time your system can be repaired without any parts but if your system is one of the other 5% so you will be required to pay for the needed parts and the cost will depend your system?s model but you will not pay any extra charge for installing any spare parts, in very rare condition the system would have a bad graphics chip which can be replaced and the part cost will be extra.

The last picture of the listing show what needs to be done to fix overheating problem on a PS3 console, Its a very advanced repair procedure and will cost an extra $40 , you can choose if you want to do that , after this process the console will be as quite as if there is no fan inside.The system will be repaired ,fully tested and shipped back within48 hours - execluding holidays and weekends -of receiving it unless it needs replacing parts and after your approval of the repair it can take up to 10 days to be repaired and shipped back.

After more than Eight years in the field of game systems repairs and upgrades there is no system that cannot be repaired unless it is electronically dead system which will require replacing the system?s main board, I will provide afull ONE YEAR Warrantyon any reballing repair service starts the day you receive your system back - BECAUSE EXPERIENCE COMBINED BY TOP OF THE LINE TECHNOLOGY MAKES THE DIFFERENCE - and if for any reason your system can not be repaired you will receive a full refund of your purchase less return shipping cost since I don\'t charge for any system check up but don\'t depend on that because I will repair your system ( Refunds can not be given to people who knowingly damaged their consoles by using heatgun and/OR flux and killed their chips, we can try to fix them but the buyer pays the cost regardeless of the result), after first repair the buyer can only qualify for warraty repair and can not ask for a refund.

* Consoles with multiple issues will receive an estimate for the total cost of repair and the repair will performed only if they agree to pay the extra cost.

** Reballing is a very advanced procedure and require vey highly skilled hands and very advanced machines , if you\'ve send your console to someone to do the same procedure and failed please don\'t send me your system, I would expect that hekilled it, if you want to take the chance on me it will be at your ownrisk which means that you will not get a refund if I perform the procedure and it still fail **

** Warranty doesn\'t cover any shipping costs which means that if for any reason your system gets any problem during warranty period I will repair it for free but you will pay shipping costs both ways **

** consoles with overheating problem or loud fan issue will require the CPU to alsobe reballed to safely replace the thermal compound and that costs $40 extra.

Your system will be shipped back using FedEx ground or home delivery and the shipping cost will cover only the return shipping cost so you still have to pay to ship your system to me.

Please use the shippinginstructions here [link removed by ]to get the address andsend yourconsole inonce you make your purchase and you are not required to send any wires or accessories with your system.

The pictures that you see here is real pictures of my machines and my work , you will not find anywhere else, one picture worth a thousand word, DON\'T FORGET TO CHECK THE LAST PICTURE, IT IS THE REAL PROVE OF THE UNMATCHED SKILLS AND EXPERIENCE. THE CHIPS YOU SEE IN THIS LAST PICTURE WERE REMOVED FROM CONSOLES THAT WERE KILLED EITHER BY THEIR OWNERS OR OTHER CONSOLE REPAIR CENTERS IN FAILED REPAIR TRIALS, THEY STILL WORKING UNTIL NOW AFTER I REPAIRED THEM BY REPLACING THESE DEAD CHIPS, DON\'T LET YOUR CONSOLE GO INTO THE SAME TRACK, LET ME DO IT RIGHT FROM FIRST TIME.

For tech people , I don\'t sell my profiles and I have no interest in answering technical questions regarding my reballing technique or exchange information so please save your and my time and don\'t send these emails because I will not reply to them.


Before you leave this page let me justshow you why you shouldn’t give up on your console specially if it is a first generation one, how bad it can get andstill be repairable, this is also show you why a reflow is not a repair and whyreballing is the only professional repair for these consoles, just check outthe following pictures.




For any other unlisted problem check out our PS3 full motherboard transplant service.

BUREAU OF ELECTRONIC AND APPLIANCE REPAIR LICENSE NO: E-90754




Buy Now

Related Items