UBB Store

PM-1022V PRECISION MATTHEWS 10\
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
PM-1022V PRECISION MATTHEWS 10\" X 22\" METAL WORKING LATHE: VARIABLE SPEED
Price: US $2199.99

This Listing is for a:

BRAND NEW MODEL PM-1022VMETAL WORKING LATHE WITH VARIABLE SPEED AND

1\" SPINDLE BORE! Wedge Type Quick Change Tool post Set Included, Pre-Installed on the machine, ready to go!

No Stand included in this listing. The stand is not available at this time and can not be added.

Here are the main features of this LATHE:

  1. Comes equipped withLongitudinal Feed AND Power Cross Feed, almostunheard of in a machine of this size
  2. Hardened and Ground Bed
  3. EnclosedOil Bath Lubricated Feed and ThreadGearbox
  4. 1\" Spindle Bore
  5. Many standard accessories included, as shown below.

PLUS INCLUDES A 3 YEAR WARRANTY!


Fast delivery times, these machines are IN STOCK here in Pittsburgh, PA and we can ship them right away. Average time delivered is 2-7 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. Or pick up at our location in Pittsburgh.



Standard Accessories:

  • Power Cross Feed
  • Upgraded Variable Speed Drive Board
  • 5\" 3 Jaw Chuck
  • 5\" 4 Jaw Chuck
  • 8\" Faceplate
  • Thread Chasing Dial
  • 4 Way Tool Post PLUS Wedge Type Quick Change Tool Post Set, with 5 Holders (100 AXA Size)
  • Centers for the Tailstock and Headstock
  • High Quality Electronics
  • Chip Pan / Oil Tray
  • Steady Rest
  • Follow Rest
  • Right / Left Hand Threading
  • Inch / Metric Threading
  • Misc. Hand Tools for Operation
  • Variable Speeds from 50 - 2000 RPM


Shipping is FREE for this machine to the 48ContiguousUS States and many areas in Canada (Please ask if this applies to your location in Canada. You would be responsible for clearing customs), or you can pick up at our location and we can load you for free. If you require liftgate service at delivery (bringing the machine from truck height to ground level) please let us know. There is no additional cost, but noting it at time of shipping makes the delivery process smoother.

If you would like to stop in and see one in person, we are at

Quality Machine Tools, 701 Parkway View Drive, Pittsburgh, PA 15205.

Our Phone # [phone removed by ]

Parts are easy to come by, we fully support these machines and the machine comes with a 3 year warranty on all parts, so you don\'t have to worry about that down the road if you need anything. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help.

Main Specs:

- Max Swing Over Bed 10\"

- Max Swing Over Cross Slide 5-1/2\"

-Center Height 5\"

- Max. Distance Between Centers 22\"

- Face to Tail Stock Spindle Face Max. Distance 23\"

- Width of Bed 5.3\"

- Bed Height 7\"

- Spindle Bore 1\"

- Spindle Taper / Internal MT-4

-Spindle Mounting System Direct Mount

- Spindle Speeds 50-2000 RPM

- Lead Screw Diameter / Pitch 3/4\" / 8 TPI

- Feed Rod Diameter 3/4\"

- Inch Thread Cutting Range 8-56 TPI, 21 Threads

- Metric Thread Cutting Range 0.2-3.5mm Pitch

- Longitudinal Feed Range (Left and Right) 0.0014-0.004 Inches Per Revolution

- Cross Feed Range (In and Out) 0.0025-0.014 Inches Per Revolution

- Spindle Length Through Headstock Approx. 11-3/4\"
Protruding End to Chuck Mounting Face

- Spindle Length Through Headstock Approx. 14-5/8\"

Protruding End to 3 Jaw Chuck Face

- Cross Slide Travel 5\"

- Compound Travel 3\"

- Tail Stock Quill Taper MT #2

-Tail Stock Quill Travel 3\"

- Main Motor Horsepower 1 HP

- Speed Control Type Variable Speed

- Voltage / Phase / Amps 120 Volts, 10 Amps Max

- Length of Machine 44\"

- Approximate machine weight (w/o stand) 360 Lbs.

- Approximate shipping weight 425 Lbs.


We have these IN STOCK and can ship anywhere in the US that a truck can get to, and we can work out arrangements with you to get this delivered, no problem. You will need to unload at your end, but shipping is no problem. NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. We just need to know before shipment.

If you have ANY questions, feel free to give us a call at [phone removed by ] or email us.

For payment we take all types including Paypal, Visa, M/C, AMEX, and Discover.

Check out our other sales formore lathes andmills.

Our Part # PM-1022Vw/QCTP



Buy Now

Related Items