This Listing is for a:

BRAND NEW MODEL PM-1440GS

METAL WORKING LATHE

220V SINGLE Phase Power For This Model!

DIGITAL READ OUT INCLUDED STANDARD

Here are some features of this LATHE:

• High Precision Japanese NSK Tapered Roller Bearings used in Spindle, for the ultimate in long life, high precision and best surface finishes

• 4 Bolt Centering Provision (Spindle Spider) Included at Outboard End of Spindle, great for through spindle work, such as gunsmithing or support other long parts that extend through the spindle bore

• Standard 3 Jaw Chuck has Reviersible Bolt on Jaws, for faster changing from O.D to I.D Holding

• D1-5 Camlock Spindle Mount, with LARGE 2\" Spindle Bore. Best in class for Universal Chuck Mounting and the ability to accept larger diameter work that can pass through the spindle for much easier setup.

• DRO and Wedge Type Quick Change Tool Post Set Included at NO Additional Charge, pre-installed on the machine and ready to use

• Power Feed on the Carriage and Cross Slide, both Left and Right, and In and Out, for both turning and facing operations with automatic feed. Allows for the best surface finish in all directions.

• 3 HP Single Phase Motor, no need for any special power source, will run from Standard 220V Single Phase Outlet

• Rigid Cast Iron Base Construction for deeper cuts and more vibration dampening.

• • Slip Clutch on Feed Rod, to help prevent overloading damage of feeds and allow the use of a solid carriage stop for repetitivework

• All Gears and Shafts are Hardened and Precision Ground

• Inch and Metric Thread Cutting Ability is Standard

• Minimal Change Gears needed for Inch Threading, only 2 changes required for the full Inch Threading Range, one set covers 4-14 TPI; and the other set will cover the 16-112 TPI Range. Most Gunsmithing work is covered in the 16-112 TPI Range, so normally, gear changes will not be required.

• Machine Made with True Inch Leadscrews, 8TPI Main Feed Screw, 10 TPI (0.100\" per turn) Pitch Cross and Compound Feed Screws with Inch and Metric Dials

• Splash Oil Lubrication in Thread/ Feed Gearbox, and Apron, for efficient lubrication and long life.

• 3 Year Warranty

Fast delivery times, these machines are IN STOCK here in Pittsburgh, PA and we can ship them right away. Average time delivered is 2-7 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. Or pick up at our location in Pittsburgh.

Standard Accessories With This Package:

• Quick Change Tool Post Set with 5 Holders
• 8\" 3 Jaw Chuck with bolt on / Reversible Jaws
• 8\" 4 Jaw Chuck with Independent Jaws
• Slide out Chip Tray
• Steady Rest and Follow Rest
• Feed Rod Clutch
• Foot Brake
• Cast Iron Base
• 2 Axis DRO Installed
• Back Splash Guard
• Headstock Dead Centers
• Reducing Sleeve for Spindle
• Thread Chasing Dial
• Tool Box
• 3 Year Warranty

Shipping is FREE on this machine to the 48ContiguousUS States and many areas in Canada (Please ask if this applies to your location. You would be responsible for clearing customs), or you can pick up at our location and we can load you for free. If you require liftgate at delivery, please let us know. There is no additional charge, but it does make the delivery process easier if it is noted before hand.

If you would like to stop in and see one in person, we are at

Quality Machine Tools, 701 Parkway View Drive, Pittsburgh, PA 15205.

Our Phone # [phone removed by ]

Parts are easy to come by, we fully support these machines and the machine comes with a 3 year warranty on all parts, so you don\'t have to worry about that down the road if you need anything. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help.

Main Specs:

- Swing Over Bed 14\"

- Center Distance 40\"

- Max. Swing in Gap 19.75\"

- Center Height 7\"

- Spindle Center Line Distance from Floor approx. 46\"

- Width of Bed 7.362\"

-Spindle Taper (Internal) MT 6\"

- Spindle Bore 2\", D1-5 Camlock

- Spindle Speed Range 40-1800 RPM, 8 Steps

- Tailstock Taper MT 4

- Inch Threads 4-112 TPI

- Metric Thread Pitch 0.1-7 Pitch

- Max Carriage Travel 38-1/2\"

- Cross Slide Travel 7\"

- Tailstock Quill Travel 4\"

- Diameter of Tailstock Quill 1.259\"

- Main Motor Horsepower 3HP

- Voltage / Phase / Amps 220 Volts,1-Phase, 12 Amps

- Approximate Shipping Weight 2000 LBS

- Approximate Machine Weight 1800LBS

- Dimensions: 71-1/2\" Long X 24\" DeepTall

We have these IN STOCK and can ship anywhere in the US that a truck can get to, and we can work out arrangements with you to get this delivered, no problem. You will need to unload at your end, but shipping is no problem. NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. We just need to know before shipment.

If you have ANY questions, feel free to give us a call at [phone removed by ] or email us.

For payment we take all types including Paypal, Visa, M/C, AMEX, and Discover.

Check out our other sales formore lathes andmills.

Our Part # PM-1440GS w/DRO