UBB Store

PM1127VF-LB METAL WORKING LATHE WITH STAND, VARIABLE SPEED, LARGE BORE, QCTP,
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
PM1127VF-LB METAL WORKING LATHE WITH STAND, VARIABLE SPEED, LARGE BORE, QCTP,
Price: US $2999.99

This Listing is for a:

BRAND NEW MODEL PM-127VF-LBMETAL WORKING LATHE WITH VARIABLE SPEED AND LARGE 1-1/2" SPINDLE BORE WITH THE STAND!


Here are some features of this LATHE:

  1. High Quality Electronics Used Throughout Machine for Long Term Reliability
  2. Power Cross Feed, Both IN and OUT; and LEFT and RIGHT.
  3. Can Cut Left Hand Threads
  4. Super Smooth and Quiet Running Machine
  5. Large Spindle Bore 1-1/2"
  6. Heavy Duty Bed Width 7" (same as most 12x36 machines)
  7. Variable Speed 120 Volt Single Phase Main Motor, 1.5hp
  8. Variable Spindle Speeds from 50-1800 RPM
  9. Inch Threads and Metric Threading, Both Right and Left Hand Threading
  10. Spindle is Dynamically Balanced, Hardened and Precision Ground
  11. Spindle is Supported by High Precision, Class 5, Adjustable Taperred Roller Bearings
  12. All Gears and Shafts are Hardened and Precision Ground
  13. Guideways Induction Hardened and Precision Ground for long life
  14. Inch Leadscrew and Feed Screws for even, easy measurements
  15. Digital Speed Readout Tachometer on face of machine

PLUS INCLUDES A 3 YEAR WARRANTY!


Fast delivery times, these machines are IN STOCK here in Pittsburgh, PA and we can ship them right away. Average time delivered is 2-7 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. Or pick up at our location in Pittsburgh.



Standard Accessories:

  • Wedge Type Quick Change AXA Tool Post Set with 5 Holders
  • 6" 3 Jaw Chuck, scroll type
  • 6" 4 Jaw Chuck, independent
  • Face Plate
  • Steady Rest
  • Follow Rest
  • Tailstock Dead Center
  • Tailstock Drill Chuck
  • Live Center
  • Back Splash Guard
  • Inch and Metric Threading
  • Thread Chasing Dial
  • Complete Heavy Steel Base with Chip Pan
  • Stand included in this listing


These are in stock and can ship right away, or you can pick up at our location and we can load you for free. If you require liftgate service at delivery (bringing the machine from truck height to ground level) please let us know. There is no additional cost, but noting it at time of shipping makes the delivery process smoother.

If you would like to stop in and see one in person, we are at

Quality Machine Tools, 701 Parkway View Drive, Pittsburgh, PA 15205.

Our Phone # [phone removed by ]

Parts are easy to come by, we fully support these machines and the machine comes with a 3 year warranty on all parts, so you don't have to worry about that down the road if you need anything. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help.

Main Specs:

- Swing Over Bed 11"

- Center Distance 27"

- Max. Swing in Gap no gap

- Width of Bed 7"

- Spindle Bore 1-1/2"

- Spindle Speed Range 50-1800 RPM, 18 Steps

- Tailstock Taper MT 3

- Inch Threads 8-56 TPI

- Metric Thread Pitch 0.5-3.0 mm

- Compound Travel 2-3/4"

- Cross Slide Travel 6"

- Tailstock Quill Travel 3-1/2"

- Spindle Mount Direct Mount with 3 studs

- Main Motor Horsepower 1.5HP Variable

- Voltage / Phase / Amps 120 Volts,SINGLE Phase, 15 Amp Circuit

- Approximate Shipping Weight 600 LBS

- Approximate Machine Weight 550LBS



We have these IN STOCK and can ship anywhere in the US that a truck can get to, and we can work out arrangements with you to get this delivered, no problem. You will need to unload at your end, but shipping is no problem. NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. We just need to know before shipment.

If you have ANY questions, feel free to give us a call at [phone removed by ] or email us.

For payment we take all types including Paypal, Visa, M/C, AMEX, and Discover.

Check out our other sales formore lathes andmills.

Our Part # PM-1127VF-LB W/PM-1127VF-LB STAND



Buy Now

Related Items