UBB Store

PM1236PEP METAL LATHE WITH 2-AX DRO, 1-1/2\
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
PM1236PEP METAL LATHE WITH 2-AX DRO, 1-1/2\" SPINDLE BORE, QCTP, 3&4 JAW CHUCKS
Price: US $4499.99

This Listing is for a:

BRAND NEW MODEL PM-1236-PEP PREFERRED PACKAGE WITH 2-AXIS DRO INSTALLED!

METAL WORKING LATHE WITH LARGE 1-1/2\" SPINDLE BORE! GREAT FOR GUN SMITHING!

FREE SHIPPING!

Here are some features of this LATHE:

  1. 36\" Between Centers
  2. Feed Rod Clutch is now standard to allow the micro carriage stop use with feed, an extra safety margin in case of overloading
  3. Many accessories included as standard, see list to compare with other lathes in this size range
  4. Work light included
  5. Base included
  6. Inch and Metric Reading Dials
  7. Wide Speed Range: 18 steps from 65-1,810 RPM\'s
  8. Induction hardened and ground ways and gears for extremely long service life
  9. High precision tapered roller bearings used on the spindle, ball bearings used on all other shafts in the headstock
  10. Best available threading/feedbox design for easier, more reliable feed/thread changes
  11. Geared head for easy and quick speed changes
  12. D1-4 Camlock spindle mount for quick chuck changes

PLUS INCLUDES A 3 YEAR WARRANTY!


Fast delivery times, these machines are IN STOCK here in Pittsburgh, PA and we can ship them right away. Average time delivered is 2-7 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. Or pick up at our location in Pittsburgh.



Standard Accessories:

  • Wedge Type Quick Change Tool Post Set with 5 Holders
  • Clutch on feed rod, for use with micrometer carriage stop
  • 6\" 3 Jaw Chuck with inside and outside jaws
  • 8\" 4 Jaw Chuck with reversible jaws
  • Faceplate
  • Steady Rest
  • Follow Rest
  • Coolant System
  • Work Light
  • Foot Brake
  • Tailstock Drill Chuck
  • Live Center
  • Backsplash Guard
  • Stand with Chip Tray
  • Inch and Metric Threading
  • Thread Chasing Dial
  • Complete Heavy Steel Base with Chip Pan
  • 2-Axis DRO Installed


Shipping is FREE for this machine to the 48Continental US States and many areas in Canada (Please ask if this applies to your location. You would be responsible for clearing customs), or you can pick up at our location and we can load you for free. If you require liftgate service at delivery (bringing the machine from truck height to ground level) please let us know. There is no additional cost, but noting it at time of shipping makes the delivery process smoother.

If you would like to stop in and see one in person, we are at

Quality Machine Tools, 701 Parkway View Drive, Pittsburgh, PA 15205.

Our Phone # [phone removed by ]

Parts are easy to come by, we fully support these machines and the machine comes with a 3 year warranty on all parts, so you don\'t have to worry about that down the road if you need anything. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help.

Main Specs:

- Swing Over Bed 12\"

-Swing Over Cross Slide 7\"

- Swing in Gap 17-11/16\"

- Distance Between Centers 36\"

- Width of Bed 7-1/16\"

- Spindle Bore 1-1/2\"

- Spindle Nose Mount D1-4, Camlock

- Taper of Spindle Bore MT-5

- Range of Spindle Speeds 65 - 1.800 RPM 18 steps

- Tailstock Taper MT-3

- Inch Threads 4 - 60 TPI

- Metric Thread Pitch 04-7.0 mm

- Travel of Cross-slide 6-1/8\"

- Max Travel of Compound 3\"

- Tailstock Quill Travel 4\"

- Motor 220 volt; 2HP; 1 phase

- Net Weight Approximately 1,250 lbs.

- Dimensions 61\" L X 18\" Deep at the chip pan: overall machine with cross slide handle 26\": Approximately 55\" tall with stand: 46\" to the spindle centerline

- Additional Specifications:(For Gun Work) Spindle length from chuck mounting face to end of spindle 15-5/8\"


We have these IN STOCK and can ship anywhere in the US that a truck can get to, and we can work out arrangements with you to get this delivered, no problem. You will need to unload at your end, but shipping is no problem. NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. We just need to know before shipment.

If you have ANY questions, feel free to give us a call at [phone removed by ] or email us.

For payment we take all types including Paypal, Visa, M/C, AMEX, and Discover.

Check out our other sales formore lathes andmills.

Our Part # PM-1236-PEP w/2AX DRO



Buy Now

Related Items