BRAND NEW MODEL PM-1440GS GUNSMITHINGMETAL WORKING LATHE 2" SPINDLE BORE, QUICK CHANGE TOOL POST, AND 2 -AXIS DIGITAL READOUT INSTALLED!

Free shipping in the 48 US States

PM-1440GS MAIN FEATURES

• High Precision Japanese NSK Tapered Roller Bearings used in spindle, for the ultimate in long life, high precision, and best surface finishes

• 4-bolt Centering Provision (Known as a Spider) Included at outboard end of spindle, great for through spindle work, such as Gunsmithing or support other long parts that extend through the spindle bore

• Standard 3 jaw chuck has reversible bolt on jaws, for faster changing from O.D. to I.D. Holding

• D1-5 CAMLOCK SPINDLE MOUNT, with LARGE 2” Spindle Bore, Best in class for universal chuck mounting, and the ability to accept larger diameter work that can pass through the spindle for much easier setup

• Excellent value for the price, includes many of the accessories people eventually add, such as the Wedge Type Quick Change Tool post Set, LEDWork Light, and more at no additional charge, pre-installed on the machine and ready to use

• Hardened and Ground gears and shafts in headstock for longer life

• Power feed on Carriage, and Cross Slide, both left and right, and in and out, for both turning and facing operations with automatic feed. Allows for the best surface finish in all directions.

• 3 HP Single Phase motor, no need for any special power source, will run from standard 220V Single Phase Outlet

• Rigid Cast Iron Base Construction, for deeper cuts, and more vibration dampening

• Induction Hardened and Precision Ground Bed Ways to resist wear and give a long service life

• High quality electronics used throughout machine

• Slip Clutch on feed rod, to help prevent overloading damage of feeds and allow the use of a solid carriage stop for repetitive work

• Inch AND Metric thread cutting ability is a standard

• Minimal Change Gears needed for Inch threading, only 2 changes required for the full Inch threading range, one set covers 4-14 TPI, and the other set will cover the 16-112 TPI Range. Most gunsmithing work is covered in the 16-112 TPI Range, so normally, gear changes will not be required at all

• TRUE INCH PITCH main lead screw is 8 TPI, cross feed, tailstock, and compound slide lead screws are 10 TPI, which make it easier to use for the INCH measurement System

• Splash oil bath lubrication in Thread/Feed Gearbox, and Apron, for efficient lubrication, and long life, especially compared to traditional open-non lubricated Thread/Feed Gearbox design, yet simple and reliable, and does not require any filter changes or pump maintenance as with oil pump lubrication systems. Also no risk of losing oil flow to expensive parts as there can be with pump lubricated systems

PLUS INCLUDES A 3 YEAR WARRANTY!

Fast delivery times, these machines are IN STOCK here in Pittsburgh, PA and we can ship them right away. Average time delivered is 2-7 days depending on how far from Pittsburgh you are, it could be a little longer in remote places but normally is very fast. Or pick up at our location in Pittsburgh.

Standard Accessories:

• Cast Iron Base
• Spindle Spider (For gunsmithing work)
• 2 axis DRO, Installed on machine
• L.E.D. Work Light
• WEDGE Type Quick Change Tool Post, With 5 Holders
• 8" 3 Jaw Chuck w/ 2 Pc Jaws
• 8" 4 Jaw Chuck
• Face Plate
• Steady Rest
• Follow Rest
• Coolant System
• Foot Brake
• Back Splash Guard
• 3 Year Warranty

Shipping is FREE in this listing for this machine to the 48 US States and many areas in Canada (Please ask if this applies to your location. You would be responsible for clearing customs), or you can pick up at our location and we can load you for free. If you require liftgate service at delivery (bringing the machine from truck height to ground level) please let us know. There is no additional cost, but noting it at time of shipping makes the delivery process smoother.

If you would like to stop in and see one in person, we are at

Quality Machine Tools, 701 Parkway View Drive, Pittsburgh, PA 15205.

Our Phone # [phone removed by ]

Parts are easy to come by, we fully support these machines and the machine comes with a 3 year warranty on all parts, so you don't have to worry about that down the road if you need anything. We are machinists here too, so we know what we sell. This is really a top quality machine, and will last a long, long time. AND we are here for support too. We sell these machines regularly, we know them inside and out, and have been in business for many years, so if there is any question, we can help.

PM-1440GS Main Specifications

• Max. Swing over bed 14”
• Max. Swing over cross slide 8.77”
• Max. Swing in gap 19.75”
• Center Height 7”
• Spindle Center Line Distance from Floor Approx. 46”
• Max. Distance Between Centers 40”
• Spindle Chuck Mount D1-5, Camlock
• Spindle Face to Tail Stock Spindle Face Max Distance 43-1/4”
• Width of Bed 7.362”
• Bed Height 11.5”
• Spindle Bore 2”
• Spindle Taper, Internal MT #6
• Spindle Mounting System Camlock, D1-5
• Spindle Speeds 60-1800RPM, 8 Steps
• Bed Length 54”
• Lead Screw Diameter / Pitch 7/8” / 8 TPI
• Feed Rod Diameter 3/4”
• Inch Thread Cutting Range 4-112 TPI, List: 4, 4.5, 5, 5.5, 5.75, 6, 6.5, 7. 8, 9, 9.5, 10, 11, 11.5, 12, 13, 14, 16, 18, 20, 22, 23, 24, 26, 28, 32, 36, 38, 40, 44, 46, 48, 52, 56, 64, 72, 80, 86,92, 96, 104, 112
• Metric Thread Cutting Range .1-7mm Pitch
• Longitudinal Feed Range (Left and Right) .0016-.117 Inches Per Revolution
• Cross Feed Range (In and Out) .0005-.032 Inches Per Revolution
• Spindle Length through headstock, Protruding End to Chuck Mounting face Approx. 17”
• Spindle Length through headstock, End to 3 Jaw Chuck face Approx. 19-3/4”
• Max Carriage Travel, Along Bed Ways 38-1/2”
• Cross Slide Travel 7”
• Compound Travel 3-3/4”
• Tail Stock Quill Diameter 1.259”
• Tail Stock Quill Taper MT #4
• Tail Stock Quill Travel 4”
• Main Motor Horsepower 3HP
• Speed Control Type Gear Shift Levers
• Voltage / Phase/ Amps 220 Volts +/- 10%, 1 Phase / 12 Amps Max.
• Max. Dimensions, Assembled (Includes cross slide handles) 51”H x 31”W x 71-1/2”L
• Foot Print (without Handles Included) 71-1/2”L x 24” Front of chip pan to back of splash guard
• Approximate Machine Weight, With Accessories and Base 1800 LBS (Cast Iron Base)

We have these IN STOCK and can ship anywhere in the US that a truck can get to, and we can work out arrangements with you to get this delivered, no problem. You will need to unload at your end, but shipping is no problem. NO extra charge for residential or anything on these, as long as a truck can get to you, its covered. We just need to know before shipment.

If you have ANY questions, feel free to give us a call at [phone removed by ] or email us.

For payment we take all types including Paypal, Visa, M/C, AMEX, and Discover.

Check out our other sales formore lathes andmills.

Our Part # PM-1440GS w/DRO