UBB Store

TRAFFIC LIGHT CONTROLLER &  SEQUENCER  3 LITE  SL-3008 120 V., SL-3009 240 V.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
TRAFFIC LIGHT CONTROLLER & SEQUENCER 3 LITE SL-3008 120 V., SL-3009 240 V.
Price: US $34.99

OUR NEW 40% SMALL CONTROLLER;A NEW LOOK FOR AN OLDFAVORITE

Introducing our new SL–3008, 120 volt controller, a greatnew size for an old favorite, only 2 ½X 3 ¼ inches (82.5 x 63.5 mm). A controller small enough to install intomost any traffic light or signal.Exactly the same as the larger, time proven controller, same reliablecomponents, design, and all of the easy to select sequence patterns have beenmaintained. There are 18 installedsequences, from the standard US Green, Yellow and Red to random flashing. All sequences and wiring diagrams are included in our easy to follow illustrated instruction sheets shipped witheach unit. Do not be afraid to play with the sequence switches, try them alland see the patterns displayed on your traffic light. Sequence number one isfactory set for shipping. Included in the package, one two wire with ground 6 foot powercord, mounting hardware, and instructions are all packaged in the box with thecontroller. There are two other voltages available in this three circuitconfiguration, SL – 3007 12 Volt AC/DC, andSL – 3009 240 volts, all at the same price. United States and Canada shippedstandard 120 Volts. Australia, New Zealand, UK, Europe and Africa are shippedstandard 240 Volt controllers. Power cord has US 120 volt plug. For other voltages, customer will have to provide an adapter for their system.

SEQUENCESAVAILABLE FOR THE THREE CIRCUIT CONTROLLER

15. Random flashing witheach color timing control. 16.Random flashing with equal color flash rate.

17. Race staging light treewith one cycle operation, with caution and stop race light feature. Add note for this unit.

18. Red, flashing green, steady green, yellow, back to red.

Let us know if you require a special sequence,we may be able to help you.

This is not a light weightcontroller, but a commercial grade unit. Voltage spike protected at the lineinput, step down transformer for better low-voltage control and reliability inthe electronic section. Heavy duty relays (10 amp), not solid-state switches,are used for positive switching control with loads up to 500 watts (4 amps) at120 volts, more than enough for incandescent, LED , light inductive loads andcontrolling two traffic lights wired in parallel. For the lowest operatingcost, and easiest maintenance, especially for high mounted traffic lights, andmaximum controller life, LED lights are by far the best choice, 25,000 hours or more. Suggested lamp wattage in LED would be 15 watts or less, incandescent, 15 to 100 watts. Incandescent burnouts, and inductive loadscan create reverse voltage spikes, which can damage solid-state switches. Theoutput section of the microchip in our controller is isolated from any responsevoltage which may be generated, making this controller the perfect choice foryour traffic light or railroad grade crossing signal unit. SPECIAL NOTE: theinput voltage and the output voltage are always the same, 120 Volts in, 120Volts out. Each light, Red, Yellow, andGreen has its own time setting control. Change the timing on one light, withoutaffecting the other lights. A poweroutage will not change any of the operations or settings.

All controllers are brand-new,fully tested and USA made in our manufacturing facilities in Kalamazoo,Michigan. We ship worldwide via USPS. Shipping charges are USPS calculated byZIP Code and shipped priority mail in the United States. We do not markup or profit from high shippingcharges and no handling charges. International shipments are international first-classpackages. Orders received and paid by3:00 PM Eastern time are shipped same day. Orders received after 3:00 PMEastern time on Friday are shipped Monday or next working day. Shipping weight per controller is .8 pound.

Lifetime warranty: If you ever need to return yourcontroller for service, we pay shipping both ways and, no repair charges, EVER, our controllers are thatgood, and satisfied customers that important.Our upgraded software and lifetime warranty, makes this controller areal bargain. Buy with confidence.

ADDITIONALINFORMATION ABOUT OUR NEW CONTROLLER

After installing, setting up thesequence, and adjusting the timing pots, it is a good time to try out othersequences that are programed into your controller. All sequences can be tried, but only thethree relay programs on the three relay controller will show all thelights. Setting programs for the fourand six relay controller will turn on only lights switched by the first threerelays. Sequences for the four and sixrelay controllers will still operate, but only the lights programed for thefirst three relays will light providing a time lag while the program completesthe cycle for the higher number relays.

You can do no harm to the controller byplaying with the sequence settings or entering a switch setting which containsno program. If an empty switch settingis set by accident nothing works, not even binky. Controllers are shipped standard set tosequence #1.

WIRING OPTIONS

Just because a wire is red, it does notmean it can’t be connected to a yellow or green light. If there is a sequence you would like, butthe lights are reversed, change the wiring to suit. All of the colored wire are from the samepower line so you may combine colored wires with no harm. Do NOT combine a colored wire with the whitewire, this will blow a fuse. Combining coloredwire will combine the time setting for each. Combine a green wire with a 20 second timewith a yellow wire with a 15 second time will result with a time of 35 secondstotal.

NEWSEQUENCES

New sequences cannot be entered in thefield. If you need a sequence that isnot in the lineup, let us know, new sequences can only be generated and addedhere at the factory. In most cases wecan generate and enter your program into the lineup at no cost to you.

VOLTAGES

Voltage questions come up quite often. We manufacture 12 volt AC/DC, 120 volt and240 volt controllers. The voltage at theinput will be the voltage at the output.The transformer on the circuit board is for the electronics only and hasnothing to do with the output voltage.If your local voltage is 240 volts and your light requires 12 volts, astepdown transformer from 240 volts to 12 volts is needed. Our 12 volt controllers will work with 12volts AC or DC. Because of the largeselection of outlet plugs around the world, we can’t afford to stock powercords to cover all. For this reason weship standard 120 volt power cords so you can provide an adaptor or cut off theplug and wire on the style for your area.

WHATBULBS SHOULD I USE?

A number of questions come up aboutwhat bulbs to use. Incandescent and LEDboth work great with this controller, florescent should NOT be used. As to wattage, that depends on where yourtraffic light is to be used, indoors or out.For outdoors 35 to 55 watts works well.Indoors 15 to 25 watts will be quite bright. The use of LED bulbs is by far the best typeof bulb to use. Most hardware storeshave a wide selection of 120 volt, medium base, screw in bulbs to choosefrom. The use of LED will greatly reducemaintenance chores of changing bulbs especially when used outdoors and extendthe life of your controller by several years.

SPECIALUSEAGE

Need a controller for use as a racestarting light tree? We have sequencesfor three light systems to the five double row grand prix style staging treeand six light single row system. Ourwiring diagrams show how to add caution and stop race options to the lights. If you order a controller to be used in thisarea, we need to know so the needed extra wiring can be added.



Buy Now