SUNLU Neatly Wound Filament
【Super Neat Filament Spool】SUNLU 3D printer filament product line is equipped with an excellent self-developed neat winding device, 100% neat rate, no clogs, making filament easier to use.【1.75mm Filament Diameter】Dimensional Accuracy +/- 0.02mm. SUNLU filament has wide compatibility due to the small diameter error, making it suitable for almost all 1.75mm FDM 3D printers.Environmentally friendly and non-toxic.Suitable for most FDM 3D Printer & 3D Pen.
SUNLU Filaments:
Printing Temp&SpeedHeated Bed TempNet WeightFeaturePLA
200-210℃:50 -100mm/s
190-210℃ :50-150mm/s
210-230℃ :150-300mm/s
230-260℃ :300-600mm/s
50-60℃1KGSupports fast printing at 600mm/s; Good fluidity, fast printing without clogging, no shortage of materials: volume flow rate of 30mm ³/s.PLA+
195-205℃:50 -100mm/s
195-205℃:50 -100mm/s
205-215℃:50 -100mm/s
185-195℃:50-100mm/s
195-225℃:100-200mm/s
50-60℃
1KGGood liquidity, supports fast printing without clogging; Printing temperature is 10 ℃ lower than ordinary PLA, more energy-efficient and environmentally friendly; Good toughness, not easy to break, and the printed works are resistant to falling and smashing.SILK205-215℃:50 -100mm/s
215-235℃:100-200mm/s
50-60℃
1KGThe model has a silky smooth surface and beautiful colors!PETG
230-240℃:50 -100mm/s
240-260℃:100-200mm/s
60℃-70℃
1KGGood toughness, resistant to drops and impacts; Good acid and alkali resistance!High-Speed Matte PETG
205-215℃:50 -100mm/s
70℃-80℃
1KGPETG that supports fast printing at 600mm/s; Matte texture, with a delicate printed surface; Not easy to draw;ABS
250-260℃:50-100mm/s
260-280℃:100-200mm/s
80-100℃
(Insulated and sealed environment,better effect)
0.9KGHigh strength, good toughness, sturdy and durable!Easy ABS
225-235℃:50 -100mm/s
235-255℃:100-200mm/s
60-70℃
0.9KGNo Enclosure is required for printing, and open printers are also suitable; High strength, good toughness, resistant to drops and impacts!TPU-SILK
210-220℃:50 -100mm/s
190-210℃:50-80mm/s
210-230℃:80-120mm/s
No need to heat0.5KGHigh resilience; The material is soft (95A) and has good ductility!WOOD
195-205℃:50 -100mm/s
215-225℃:50 -100mm/s
210-220℃:50 -100mm/s
190-210℃:50 -150mm/s
210-230℃:150-300mm/s
250-260℃:50 -100mm/s
3D Filament Storage Tips:
- We recommended storing filament in a sealed plastic bag or box after each print (a large ziplock or Tupperware works well).
- In extreme cases where the filament gets damp, you can bake it in an oven with 50-degree Celsius for about an hour to restore its dryness.
- Each time after use of your 3D Printer Filament. Be sure to insert the free end of the filament into the hole to avoid the filament being tangled for next time use.
Contact us
The best way to contact us is by messages.
We always reply messages that are sent to us with an inquiry, usually within 24 hours of receipt or sooner. We will answer all messages during our business hours. (Monday - Friday 9:00 am to 6:00 pm HKT except all Holidays)
Please do not leave any low detailed seller ratings, neutral or negative response before contacting us.
We commit you 100% satisfaction guarantee.
response
1.We will appreciate a positive response with all 5 star rating when you aresatisfied.
2.Our goal is to make sure you are a happy buyer and have a pleasant shopping experience with us.
3.Please email us before leaving any 1 or 2 ratings, negative response or open any dispute.
4. We understand the concerns and frustrations that occasionally occur, and appreciate the opportunity to assist you in resolving any problem associated with your purchases.
On Dec 20, 2024 at 01:12:53 PST, seller added the following information:
