UBB Store

Crystal Clear Bar Table Top Epoxy Resin Coating For Wood Tabletop - 1 Gallon Kit
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Crystal Clear Bar Table Top Epoxy Resin Coating For Wood Tabletop - 1 Gallon Kit
Price: US $62.97

Pro Marine Supplies

100% OriginalAwesome PricingFast ShippingLorem Ipsum1Lorem Ipsum2Crystal Clear Bar Table Top Epoxy Resin Coating For Wood Tabletop -1 Gallon KitDescription:UV Stable Crystal Clear Table Top System is a high performance two-component Clear epoxy system designed for Table Tops, Bars, Wood finishes, See-Through Encapsulations, Artwork, and other applications requiring a clear, strong, plastic coating specifically designed to resist Yellowing caused by the sun and other Ultra Violet light sources. The material has an easy to use 1 to 1 by volume mix ratio, wets out substrates well, maintains its integrity over sharp corners, it has excellent air release qualities and a relatively fast set time for an epoxy coating which may be accelerated by mild heat to 160F. While this material will do much better than competitors products for non-yellowing we still do not recommend it for permanent outdoor applications.Advantages:
  • 100% Solids
  • Self Leveling, High Gloss
  • U.V. Resistant Formula
  • Excellent Air Release
  • Excellent Color StabilityImproved Impact Strength
  • Improved Surface Appearance
  • Early Development of Physical and Performance Properties
  • Produces a Tough, High Gloss, Water Resistant Coating
  • Eliminates Craters, Crawling and Fish Eyes
  • Blush Resistant
Technical Data:Base Resin A-Side Curing Agent B-SideAppearance: Clear Syrup Clear SyrupViscosity, Spindle #4 @ 6 rpm: 12,000 (+/- 2,000) 1,150 (+/- 300)Weight per half a Gallon: Side A (Epoxy) - 4.5 Lbs. Side B (Epoxy Hardener) - Lbs. 3.7 Lbs.Mix Ratio: 1 to 1 by VolumeGel-Time (100 gr. mass): 25 minutes (+/- 5 min.)1/4” Casting Tack Free Time: 2.5 hours (+/- 30 min.)Thin film Set Time 4 to 8 Hours depending on thickness and ambient temperatureFull Cure 24 to 72 hours for optimum propertiesHardness 70—75 Shore D (full cure)Elongation > 15%Application Tips:

Mix material slowly to avoid excess air entrapment, after applying wait several minutes then eliminate bubbleswith a heat gun or alcohol mist. Substrates must be clean and the area should be dust free.

This material is for professional use only, using adequate ventilation and protection from eye andskin exposure. Any information supplied with this material is given in good faith but should beverified by the end user, as is the suitability of the material for their application. The warranty of thisthe material shall be limited to the replacement of defective material.

Limited Offer

Payment

Shipping

We accept payment by any of the following methods :PayPal


Please pay as soon as possible after winning an sale, as that will allow us to post your item to you sooner!

We offer FREE shipping on all orders!


Your order will be dispatched within 1 working day of receiving payment (Monday-Friday) and you should expect to receive it one or two days after dispatch (for orders sent RM 1st Class).


In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.

Returns

If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not.


You can return a product for up to 30 days from the date you purchased it.


Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.

100% GenuineAwesome PricingFast Shipping$Description: UV Stable Crystal Clear Table Top System is a high performance two-component Clear epoxy system designed for Table Tops, Bars, Wood finishes, See-Through Encapsulations, Artwork, and other applications requiring a clear, strong, plastic coating specifically designed to resist Yellowing caused by the sun and other Ultra Violet light sources. The material has an easy to use 1 to 1 by volume mix ratio, wets out substrates well, maintains its integrity over sharp corners, it has excellent air release qualities and a relatively fast set time for an epoxy coating which may be accelerated by mild heat to 160F. While this material will do much better than competitors products for non-yellowing we still do not recommend it for permanent outdoor applications. Advantages: ---100% Solids ---Self Leveling, High Gloss ---U.V. Resistant Formula ---Excellent Air Release ---Excellent Color StabilityImproved Impact Strength ---Improved Surface Appearance ---Early Development of Physical and Performance Properties ---Produces a Tough, High Gloss, Water Resistant Coating ---Eliminates Craters, Crawling and Fish Eyes ---Blush Resistant Technical Data: Base Resin A-Side Curing Agent B-Side Appearance: Clear Syrup Clear Syrup Viscosity, Spindle #4 @ 6 rpm: 12,000 (+/- 2,000) 1,150 (+/- 300) Weight per half a Gallon: Side A (Epoxy) - 4.5 Lbs. Side B (Epoxy Hardener) - Lbs. 3.7 Lbs. Mix Ratio: 1 to 1 by Volume or 100 A to 83 B by Weight Gel-Time (100 gr. mass): 25 minutes (+/- 5 min.) 1/4” Casting Tack Free Time: 2.5 hours (+/- 30 min.) Thin film Set Time 4 to 8 Hours depending on thickness and ambient temperature Full Cure 24 to 72 hours for optimum properties Hardness 70—75 Shore D (full cure) Elongation > 15% Application Tips: Mix material slowly to avoid excess air entrapment, after applying wait several minutes then eliminate bubbles with a heat gun or alcohol mist. Substrates must be clean and the area should be dust free. This material is for professional use only, using adequate ventilation and protection from eye and skin exposure. Any information supplied with this material is given in good faith but should be verified by the end user, as is the suitability of the material for their application. The warranty of this the material shall be limited to the replacement of defective material.

Pro Marine Supplies

Lorem Ipsum1Lorem Ipsum2Crystal Clear Bar Table Top Epoxy Resin Coating For Wood Tabletop -1 Gallon KitLimited OfferDescription:UV Stable Crystal Clear Table Top System is a high performance two-component Clear epoxy system designed for Table Tops, Bars, Wood finishes, See-Through Encapsulations, Artwork, and other applications requiring a clear, strong, plastic coating specifically designed to resist Yellowing caused by the sun and other Ultra Violet light sources. The material has an easy to use 1 to 1 by volume mix ratio, wets out substrates well, maintains its integrity over sharp corners, it has excellent air release qualities and a relatively fast set time for an epoxy coating which may be accelerated by mild heat to 160F. While this material will do much better than competitors products for non-yellowing we still do not recommend it for permanent outdoor applications.Advantages:
  • 100% Solids
  • Self Leveling, High Gloss
  • U.V. Resistant Formula
  • Excellent Air Release
  • Excellent Color StabilityImproved Impact Strength
  • Improved Surface Appearance
  • Early Development of Physical and Performance Properties
  • Produces a Tough, High Gloss, Water Resistant Coating
  • Eliminates Craters, Crawling and Fish Eyes
  • Blush Resistant
Technical Data:Base Resin A-Side Curing Agent B-SideAppearance: Clear Syrup Clear SyrupViscosity, Spindle #4 @ 6 rpm: 12,000 (+/- 2,000) 1,150 (+/- 300)Weight per half a Gallon: Side A (Epoxy) - 4.5 Lbs. Side B (Epoxy Hardener) - Lbs. 3.7 Lbs.Mix Ratio: 1 to 1 by Volume or 100 A to 83 B by WeightGel-Time (100 gr. mass): 25 minutes (+/- 5 min.)1/4” Casting Tack Free Time: 2.5 hours (+/- 30 min.)Thin film Set Time 4 to 8 Hours depending on thickness and ambient temperatureFull Cure 24 to 72 hours for optimum propertiesHardness 70—75 Shore D (full cure)Elongation > 15%Application Tips:

Mix material slowly to avoid excess air entrapment, after applying wait several minutes then eliminate bubbleswith a heat gun or alcohol mist. Substrates must be clean and the area should be dust free.

This material is for professional use only, using adequate ventilation and protection from eye andskin exposure. Any information supplied with this material is given in good faith but should beverified by the end user, as is the suitability of the material for their application. The warranty of thisthe material shall be limited to the replacement of defective material.

Shipping

We accept payment by any of the following methods:PayPal


Please pay as soon as possible after winning an sale, as that will allow us to post your item to you sooner!

Payment

We offer FREE shipping on all orders!


Your order will be dispatched within 1 working day of receiving payment (Monday-Friday) and you should expect to receive it one or two days after dispatch (for orders sent RM 1st Class).


In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.

Returns

If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not.


You can return a product for up to 60 days from the date you purchased it.


Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.

100% GenuineFast ShippingAwesome PricingDescription:UV Stable Crystal Clear Table Top System is a high performance two-component Clear epoxy system designed for Table Tops, Bars, Wood finishes, See-Through Encapsulations, Artwork, and other applications requiring a clear, strong, plastic coating specifically designed to resist Yellowing caused by the sun and other Ultra Violet light sources. The material has an easy to use 1 to 1 by volume mix ratio, wets out substrates well, maintains its integrity over sharp corners, it has excellent air release qualities and a relatively fast set time for an epoxy coating which may be accelerated by mild heat to 160F. While this material will do much better than competitors products for non-yellowing we still do not recommend it for permanent outdoor applications.Advantages:
  • 100% Solids
  • Self Leveling, High Gloss
  • U.V. Resistant Formula
  • Excellent Air Release
  • Excellent Color StabilityImproved Impact Strength
  • Improved Surface Appearance
  • Early Development of Physical and Performance Properties
  • Produces a Tough, High Gloss, Water Resistant Coating
  • Eliminates Craters, Crawling and Fish Eyes
  • Blush Resistant
Technical Data:Base Resin A-Side Curing Agent B-SideAppearance: Clear Syrup Clear SyrupViscosity, Spindle #4 @ 6 rpm: 12,000 (+/- 2,000) 1,150 (+/- 300)Weight per half a Gallon: Side A (Epoxy) - 4.5 Lbs. Side B (Epoxy Hardener) - Lbs. 3.7 Lbs.Mix Ratio: 1 to 1 by Volume or 100 A to 83 B by WeightGel-Time (100 gr. mass): 25 minutes (+/- 5 min.)1/4” Casting Tack Free Time: 2.5 hours (+/- 30 min.)Thin film Set Time 4 to 8 Hours depending on thickness and ambient temperatureFull Cure 24 to 72 hours for optimum propertiesHardness 70—75 Shore D (full cure)Elongation > 15%Application Tips:

Mix material slowly to avoid excess air entrapment, after applying wait several minutes then eliminate bubbleswith a heat gun or alcohol mist. Substrates must be clean and the area should be dust free.

This material is for professional use only, using adequate ventilation and protection from eye andskin exposure. Any information supplied with this material is given in good faith but should beverified by the end user, as is the suitability of the material for their application. The warranty of thisthe material shall be limited to the replacement of defective material.



Buy Now

Related Items