TESTING & COSMETIC NOTES:
This is a USED WORKING item in GOOD cosmetic condition that IS THOROUGHLY TESTED and is GUARANTEED WORKING
The unit has been reset to the factory default settings. See console log below.
COMPONENTS INCLUDED IN THIS sale:• (1) - CISCO ASR1002 1000 SERIES AGGREGATION SERVICES ROUTER
• (1) - CISCO SPA-5X1GE-V2 5-PORT GIGABIT ETHERNET SHARED PORT ADAPTER
• (1) - CISCO SPA-8X1GE-V2 8-PORT GIGABIT ETHERNET SHARED PORT ADAPTER
• (2) - CISCO POWER SUPPLY
• (2) - POWER CORD
REPLACEMENT or MONEY BACK GUARANTEE:When you receive a Guaranteed item from OC Depot, it should perform as described. In the rare situation that this is not the case, we will send a replacement upon safe return of the original item within 30 days of receiving the item. If a replacement is not available we will honor the terms of our Money-Back Guarantee.
ADDITIONAL INFORMATION:Located />Image size 339962168 inode num 14, bks cnt 82999 blk size 8*512
Boot image size = 339962168 (0x14436938) bytes
Missing or illegal ip address for variable DEFAULT_GATEWAY
Using midplane macaddr
Missing or illegal ip address for variable IP_ADDRESS
Missing or illegal ip address for variable IP_SUBNET_MASK
Package header rev 0 structure detected
Calculating SHA-1 hash...done
validate_package: SHA-1 hash:
calculated /> expected />Image validated
h were auto-corrected.
%IOSXEBOOT-4-BOOT_ACTIVITY_LONG_TIME: (rp/0): Chasfs initialisation took: 11 sec
onds, expected max time 10 seconds
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software, IOS-XE Software (PPC_LINUX_IOSD-ADVIPSERVICESK9-M), Version
15.2(4)S2, RELEASE SOFTWARE (fc1)
Technical Support: http:/www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Tue 11-Dec-12 18:24 by mcpre
Cisco IOS-XE software, Copyright (c) 2005-2012 by cisco Systems, Inc.
All rights reserved. Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License (\"GPL\") Version 2.0. The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0. For more details, see the
documentation or \"License Notice\" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.
% failed to initialize nvram
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
If you require further assistance please contact us by sending email to
export@cisco.com.
cisco ASR1002 (2RU) processor with 1688861K/6147K bytes of memory.
Processor board ID FOX1452H7GP
17 Gigabit Ethernet interfaces
32768K bytes of non-volatile configuration memory.
4194304K bytes of physical memory.
7798783K bytes of eUSB flash at bootflash:.
--- System Configuration Dialog ---
Would you like to enter the initial configuration dialog? [yes/no]: n
Press RETURN to get started!
*Nov 22 17:47:58.537: %IOSXE_RP_NV-3-NV_ACCESS_FAIL: Initial read of NVRAM conte
nts failed
*Nov 22 17:48:10.914: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for typ
e vlan
*Nov 22 17:48:12.803: %LINK-3-UPDOWN: Interface Lsmpi0, changed state to up
*Nov 22 17:48:12.804: %LINK-3-UPDOWN: Interface EOBC0, changed state to up
*Nov 22 17:48:12.804: %LINEPROTO-5-UPDOWN: Line protocol on Interface VoIP-Null0
, changed state to up
*Nov 22 17:48:12.805: %LINEPROTO-5-UPDOWN: Line protocol on Interface LI-Null0,
changed state to up
*Nov 22 17:48:12.805: %LINK-3-UPDOWN: Interface GigabitEthernet0, changed state
to down
*Nov 22 17:48:12.824: %LINK-3-UPDOWN: Interface LIIN0, changed state to up
*Nov 22 17:48:13.055: %NETCLK-5-NETCLK_MODE_CHANGE: Network clock source not ava
ilable. The network clock has changed to freerun
*Nov 22 17:48:13.515: %IOSXE_MGMTVRF-6-CREATE_SUCCESS_INFO: Management vrf Mgmt-
intf created with ID 1, ipv4 table-id 0x1, ipv6 table-id 0x1E000001
*Nov 22 17:48:14.064: %LINEPROTO-5-UPDOWN: Line protocol on Interface Lsmpi0, ch
anged state to up
*Nov 22 17:48:14.064: %LINEPROTO-5-UPDOWN: Line protocol on Interface EOBC0, cha
nged state to up
*Nov 22 17:48:14.065: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEth
ernet0, changed state to down
*Nov 22 17:48:14.065: %LINEPROTO-5-UPDOWN: Line protocol on Interface LIIN0, cha
nged state to up
*Nov 22 17:48:14.328: %DYNCMD-7-PKGINT_INSTALLED: The command package \'platform_
trace\' has been succesfully installed
*Nov 22 17:48:17.166: %DYNCMD-7-CMDSET_LOADED: The Dynamic Command set has been
loaded from the Shell Manager
*Nov 22 17:47:21.955: %CPPHA-7-START: F0: cpp_ha: CPP 0 preparing image /tmp/sw
*Nov 22 17:47:22.228: %CPPHA-7-START: F0: cpp_ha: CPP 0 startup init image /tmp
*Nov 22 17:47:27.109: %CPPHA-7-START: F0: cpp_ha: CPP 0 running init image /tmp
*Nov 22 17:47:27.392: %CPPHA-7-READY: F0: cpp_ha: CPP 0 loading and initializat
ion complete
*Nov 22 17:47:28.683: %IOSXE-6-PLATFORM: F0: cpp_cp: Process CPP_PFILTER_EA_EVEN
T__API_CALL__REGISTER
*Nov 22 17:48:26.003: %IOSXE-5-PLATFORM: R0/0: xinetd[2947]: xinetd Version 2.3.
14 started with no options compiled in.
*Nov 22 17:48:26.003: %IOSXE-5-PLATFORM: R0/0: xinetd[2947]: Started working: 1
available service
*Nov 22 17:48:26.011: %IOSXE-5-PLATFORM: R0/0: xinetd[2948]: xinetd Version 2.3.
14 started with no options compiled in.
*Nov 22 17:48:26.012: %IOSXE-5-PLATFORM: R0/0: xinetd[294
Router>8]: Started working: 1 available service
*Nov 22 17:49:43.914: %LINK-5-CHANGED: Interface GigabitEthernet0/0/0, changed s
tate to administratively down
*Nov 22 17:49:43.917: %LINK-5-CHANGED: Interface GigabitEthernet0/0/1, changed s
tate to administratively down
*Nov 22 17:49:43.919: %LINK-5-CHANGED: Interface GigabitEthernet0/0/2, changed s
tate to administratively down
*Nov 22 17:49:43.922: %LINK-5-CHANGED: Interface GigabitEthernet0/0/3, changed s
tate to administratively down
*Nov 22 17:49:43.922: %LI
Router>NK-5-CHANGED: Interface GigabitEthernet0/1/0, changed state to administra
tively down
*Nov 22 17:49:43.924: %LINK-5-CHANGED: Interface GigabitEthernet0/1/1, changed s
tate to administratively down
*Nov 22 17:49:43.925: %LINK-5-CHANGED: Interface GigabitEthernet0/1/2, changed s
tate to administratively down
*Nov 22 17:49:43.929: %LINK-5-CHANGED: Interface GigabitEthernet0/1/3, changed s
tate to administratively down
*Nov 22 17:49:43.929: %LINK-5-CHANGED: Interface GigabitEthernet0/1/4, changed s
tate to administratively down
*Nov 22 17:49:43.931: %LINK-5-CHANGED: Interface GigabitEthernet0/2/0, changed s
tate to administratively down
*Nov 22 17:49:44.914: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEth
ernet0/0/0, changed state to down
*Nov 22 17:49:44.917: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEth
ernet0/0/1, changed state to down
*Nov 22 17:49:44.920: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEth
ernet0/0/2, changed state to down
*Nov 22 17:49:44.923: %LINEPROTO-5-U
Router>PDOWN: Line protocol on Interface GigabitEthernet0/0/3, changed state to
down
*Nov 22 17:49:44.923: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEth
ernet0/1/0, changed state to down
*Nov 22 17:49:44.923: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEth
ernet0/1/1, changed state to down
*Nov 22 17:49:44.925: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEth
ernet0/1/2, changed state to down
*Nov 22 17:49:44.930: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEth
ernet0/1/3, changed state to down
*Nov 22 17:49:44.930: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEth
ernet0/1/4, changed state to down
*Nov 22 17:49:44.930: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEth
ernet0/2/0, changed state to down
*Nov 22 17:49:46.284: %IOSXE_OIR-6-REMSPA: SPA removed from subslot 0/0, interfa
ces disabled
*Nov 22 17:49:46.284: %IOSXE_OIR-6-REMSPA: SPA removed from subslot 0/1, interfa
ces disabled
*Nov 22 17:49:46.284: %IOSXE_OIR-6-REMSPA: SPA removed from subslot 0/2, interfa
ces disabled
*Nov 22 17:49:46.291: %SPA_OIR-6-OFFLINECARD: SPA (4XGE-BUILT-IN) offline in sub
slot 0/0
*Nov 22 17:49:46.302: %SPA_OIR-6-OFFLINECARD: SPA (SPA-5X1GE-V2) offline in subs
lot 0/1
*Nov 22 17:49:46.317: %SPA_OIR-6-OFFLINECARD: SPA (SPA-8X1GE-V2) offline in subs
lot 0/2
*Nov 22 17:49:46.331: %IOSXE_OIR-6-INSCARD: Card (fp) inserted in slot F0
*Nov 22 17:49:46.332: %IOSXE_OIR-6-ONLINECARD: Card (fp) online in slot F0
*Nov 22 17:49:46.390: %IOSXE_OIR-6-INSCARD: Card (cc) inserted in slot 0
*Nov 22 17:49:46.390: %IOSXE_OIR-6-ONLINECARD: Card (cc) online in slot 0
*Nov 22 17:49:46.712: %SYS-5-RESTART: System restarted --
Cisco IOS Software, IOS-XE Software (PPC_LINUX_IOSD-ADVIPSERVICESK9-M), Version
15.2(4)S2, RELEASE SOFTWARE (fc1)
Technical Support: http:/www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Tue 11-Dec-12 18:24 by mcpre
*Nov 22 17:49:47.037: %CRYPTO-6-GDOI_ON_OFF: GDOI is OFF
*Nov 22 17:49:47.037: %CRYPTO-6-ISAKMP_ON_OFF: ISAKMP is OFF
*Nov 22 17:49:50.886: %SPA_OIR-6-ONLINECARD: SPA (4XGE-BUILT-IN) online in subsl
ot 0/0
*Nov 22 17:49:51.375: %SPA_OIR-6-ONLINECARD: SPA (SPA-8X1GE-V2) online in subslo
t 0/2
*Nov 22 17:49:54.732: %SPA_OIR-6-ONLINECARD: SPA (SPA-5X1GE-V2) online in subslo
t 0/1
Router>en
Router#exit
Router con0 is now available
Press RETURN to get started.
Router>show version
Cisco IOS Software, IOS-XE Software (PPC_LINUX_IOSD-ADVIPSERVICESK9-M), Version
15.2(4)S2, RELEASE SOFTWARE (fc1)
Technical Support: http:/www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Tue 11-Dec-12 18:24 by mcpre
IOS XE Version: 03.07.02.S
Cisco IOS-XE software, Copyright (c) 2005-2012 by cisco Systems, Inc.
All rights reserved. Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License (\"GPL\") Version 2.0. The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0. For more details, see the
documentation or \"License Notice\" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.
ROM: IOS-XE ROMMON
Router uptime is 2 minutes
Uptime for this control processor is 5 minutes
++
% ?+* follows nothing
System returned to ROM by reload at 14:08:23 UTC Thu Sep 26 2013
System image file is />in\"
Last reload reason: PowerOn
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
If you require further assistance please contact us by sending email to
export@cisco.com.
cisco ASR1002 (2RU) processor with 1688861K/6147K bytes of memory.
Processor board ID FOX1452H7GP
17 Gigabit Ethernet interfaces
32768K bytes of non-volatile configuration memory.
4194304K bytes of physical memory.
7798783K bytes of eUSB flash at bootflash:.
Configuration register is 0x2102
Router> Please Click Here to Visit Our StoreSearchBy37 - 255992 | Loc: H23 | L: Mitchell |T: | PM: Nick | QTY: 0| Plan: F1- Q1 5 pounds or more |24.00\"x22.00\"x7.00\"53.00lbs |Start: $0.00 | BIN: $149.99 | |11/22/2023 ||Computers/Tablets & Networking::Enterprise Networking, Servers::Enterprise Routers
