Creality K1 Max Build Plate 315x310mm, Peo, Pet, Pei, Pey
Printing Instructions:

1. When printing for the first time, keep the built sheet smoothed (the nozzle and hot bed distance fit the thickness of A4 paper).

2. Remove the adhesive from the sticker on the magnetic base and stick it on the hot bed platform, pay attention to make it flat and leave no air bubbles.

3. Adsorb the PEI side or PET side spring steel plate on the magnetic base.

4. Suggest printing temperature: PLA 60℃ PETG 70-80℃ ABS 90-100℃.

Start printing on PET and PEO sheet, the hot bed temperature can be adjusted to 40°C-80°C according to the actual situation (PEO/PET does not exceed 80°C).

PEI sheet can work at 160°C~180°C for a long period of time, PEI can't exceed 200°C.

5. Remove the sheet from the printing surface and fold the sheet slightly, you can easily take the model.

Note 1:

DO NOT USE ACETONE ON THE POWDER COATED PEI SIDE!

Note 2:

PET,PEO and PEI must be used with the magnetic base.

If you are purchasing a product without a magnetic base,

please make sure you have a magnetic base. Package Includes:
1x Build Plate