When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Dell PowerEdge M710 HD Blade Server with 2 x heatsinks (no CPU no Memory) In very good condition and in full working order - 12 months warranty Integrated H200 RAID Controller and iDRAC Please note that this is a blade server and requires a DellM1000e Chassis (not included) tooperate Processor - Intel® Xeon® processor 5500 and 5600 series
Six-core Intel® Xeon® Quad-core Intel® Xeon®
Operating System - Microsoft® Windows Server® 2008 SP2, x86/x64 (x64 includes Hyper-V™)
- Microsoft® Windows Server® 2008 R2 SP1, x64 (includes Hyper-V™ v2)
- Novell® SUSE® Linux® Enterprise Server v11, x86/x64, SP1
- Red Hat® Enterprise Linux® Server v5.5, x86/x64
- Red Hat® Enterprise Linux® AS/ES v4.8, x86/x64
- Oracle® Solaris™
Virtualisation Options: Citrix® XenServer™ Microsoft® Hyper-V™ through Microsoft® Windows Server® 2008 VMware® vSphere™ 4.1 (including VMware ESX® 4.1 or VMware ESXi™ 4.1)
For more information on the specific versions and additions, style=\"margin: 0px; padding: 0px; border: 0px; vertical-align: baseline; list-style: none; float: left; background: transparent;\">- Intel® 5520
Memory1 - Up to 288GB (18 DIMM slots): 1GB/2GB/4GB/8GB/16GB ECC DDR3
Up to 1333MHz
Embedded Hypervisor (Optional) - Citrix® XenServer™ v 5.6 (embedded option available)
- Microsoft® Windows Server® 2008, with Hyper-V™
- VMware® vSphere™ Version 4.1 (including ESX v4.1/ESXi™ v4.1)
Storage - Hot-plug Hard Drive Options:
2.5\" SATA SSD, SAS (15K, 10K)
Drive Bays - Hot-Swap options available:
Up to two 2.5\" SAS or SSD drives
I/O Mezzanine Card Options - Fully populated mezzanine card slots and switch modules will yield 3 redundant I/O fabrics per blade.
1Gb & 10Gb Ethernet: Dual-Port Broadcom®Gb Ethernet w/ TOE(BCM-5709S) Quad-Port Intel®Gb Ethernet Quad-Port Broadcom®Gb Ethernet(BCM-5709S) Dual-Port Intel®10Gb Ethernet Dual-Port Broadcom®10Gb Ethernet(BCM-57711) Brocade®BR1741M-k Dual-Port Mezzanine CNA
10Gb Enhanced Ethernet & Converged Network Adapters(CEE/DCB/FCoE): Dual-Port Intel®10Gb Enhanced Ethernet(FCoE Ready for Future Enablement) Dual-Port Emulex®Converged Network Adapter(OCM10102-F-M) - Supports CEE/DCB 10GbE + FCoE Dual-Port Qlogic®Converged Network Adapter(QME8142) - Supports CEE/DCB 10GbE + FCoE Dual-Port Qlogic®Converged Network Adapter(QME8242-k) - Supports 10GbE + NPAR Dual-Port Broadcom®57712-k Converged Network Daughter Card(NDC) - Supports CEE/DCB 10GbE + NPAR + FCoE + iSCSI-TLV Brocade®BR1741M-k Dual-Port Mezzanine CAN
Fibre Channel: Dual-Port QLogic®FC8 Fibre Channel Host Bus Adapter(HBA)(QME2572) Dual-Port Emulex®FC8 Fibre Channel Host Bus Adapter(HBA)(LPe1205-M) Emulex®8 or 4 Gb/s Fibre Channel Pass-Through Module
Infiniband: Dual-Port Mellanox®ConnectX-2™ Dual Data Rate(DDR) and Quad Data Rate(QDR) InfiniBand
RAID Controllers - PERC H200 Integrated SAS Controller (6Gb/s)
Communications - Four embedded Broadcom® 5709S Gigabit NIC with failover and load balancing.
TOE (TCP/IP Offload Engine) supported on Microsoft® Windows Server® 2003 SP1 or higher with Scalable Networking Pack. iSCSI Offload supported on Windows Server® 2003 SP1 or higher, Red Hat® Enterprise Linux® 5, and SUSE® Linux® Enterprise Server 10. Scalable Networking Pack for Windows Server® 2003 is not required.
Boot from SAN (iSCSI and FC) supported
Optional add-in NICs: See I/O Mezzanine Card Options Optional add-in HBAs: See I/O Mezzanine Card Options
Power - Supplied by Dell’s M1000e Blade Chassis
Chassis - The PowerEdge M710HD blade server fits in the PowerEdge M1000e blade enclosure. A total 16 half-height blades can fit into every M1000e enclosure. Full-height and half-height blades can be mixed in M1000e enclosures with no limitations.
M710HD Dimensions and Weight (blade only): Height: 18.9 cm (7.4 in) Width: 5 cm (2 in) Depth: 48.6 cm (19.2 in)
Management - Dell™ OpenManage™ software tools
- Integration with 3rd party management solutions via Dell’s Certified Partner Program
- BMC, IPMI 2.0 compliant
Altiris® Deployment Solution for Dell Blade Servers Designed to help reduce deployment time from hours to minutes
Integrated Dell Remote Access Controller (iDRAC) Out of Band alerting, status, inventory, and troubleshooting via Secure Web GUI / CLI (telnet/SSH)
Console Redirection vMedia (virtual media) - Map optical or hard drives to the blade from remote workstations over a network vKVM (virtual KVM) out-of-band remote console redirection-supports Java or ActiveX plug-ins IPMI 2.0 support
VAT @ 20% INCLUDED IN PRICE - VAT INVOICE PROVIDED £150 Excluding VAT VAT IS NOT PAYABLE BY PURCHASERS OUTSIDE OF THE UK on Pallet 7913 in
|
|