When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
- Interface: USB 3.2 Gen 2, eSATA
- SSD (Solid State Drive) inside for faster access, durability, and shock-resistance
- FIPS 140-2 Level 2 256-bit AES hardware encryption
- CipherShield Smart Insert technology with Dual CipherKeys for two-factor authentication
- Encryption key is on the removable hardware key; can be removed and stored away to prevent unauthorized access
Product Description Now with USB 3.2 Gen 2 interface capable of transferring files at the speed of up to 10 Gbps, it takes advantage of the faster speed of the newer generation of SSD drive. You can now transfer files at twice the speed of the previous generation of USB 3.0 (USB 3.2 Gen 1). Faster transfer speed saves you time and money and makes it painless to transfer large files. RAID 0 striping with 2x 2.5″ gives larger capacity with lighter weight and lower power consumption than our 3.5″ base RAID. It is possible to use power from the USB port without using the power adapter. Using metal alloy case, heat is easily dissipated and with less plastic used, more recyclable and eco friendly too. CipherShield dual keys encrypted external hard drive safeguards and protects classified information when they are too important to be left in the hand of one individual. To gain access to the drive, authentication will be based on two unique Cipherkeys. It requires both keys to be plugged in all the time while working with the drive. It is like getting a safe deposit box that takes two keys to open. It is suitable for group settings where more than one individual is working on highly confidential projects. i.e. blueprints for the company’s next new products, top-secret programs, highly confidential legal cases, sensitive customer records, and financial information. CipherShield design features a chip embedded in the access key which matches the AES encryption module on the controller board. The drive will automatically lock down its content once the key is unplugged, or the power is shut off. And without the access key, data will not be seen or accessed in the event of theft or loss of the external drive. Data stored on the hard drive are safeguarded by a hardware-based National Institute of Standards and Technology (NIST) certified industrial strength AES (Advanced Encryption Standard) cryptographic engine. The advantage of hardware encryption over software encryption is that you need not be concerned about Trojans/viruses or software upgrades, which results in a decrease in the total cost of ownership. You do not need to remember complicated passwords or PINs. Since CipherShield encrypts data independent of the operating system; removing the drive and connecting it directly to the SATA BUS will not defeat the encryption. Unit is bundled with four keys and registration is required for key maximum protection with access requirement of two keys Bundled with two sets of unique Cipherkeys – a total of 4 keysRAID 0 striping for faster transfer2 x 2.5″ drive inside for lower power and lighter weightSSD drives inside for durability and shock resistanceUSB-powered; power adapter optionaleSATA also powered by a USB cableNIST FIPS 140-2 Level 2 compliant AES hardware encryption with 256-bit encryptionConforms to HIPAA regulation regarding patient privacy and Sarbanes-Oxley regarding corporate financial and accounting practiceCipherShield Smart Insert technology with Cipherkey to authenticate the drive, no complicated password or PIN to rememberFDE (Full Disk Encryption) encrypt the whole driveReal-time “on-the-fly” encryption without any performance degradationFaster, easier to use, and provide better security than software encryptionOperates independently to the OS: does not require separate driversThe encryption key is on the removable hardware key; can be removed and stored away to prevent unauthorized accessPlug and play; no complicated installationTransfer rate:- USB 3.2 Gen 2 10 Gbits/s
- eSATA 6.0 Gbits/s
Drive: Pre-formatted NTFS SATA drive (usable in PC & Linux, need to reformat to use in Mac)TAA compliantItem dimension: 8.25″ x 5.5″ x 1.75″Item weight: 1.9lbShipping dimension: 9.63″ x 6.82″ x 4″Shipping weight: 4lbECCN: 5A992.cHTS: 8471705065System Requirement - USB 3.2 Gen 2 10Gbps SuperSpeed+ port
- Compatible to previous generations USB port but will only run at maximum speed for that port
- eSATA port with AHCI mode to support OS X 10.4 or later
- Microsoft Windows 10, 8, 7, Vista, XP
- Windows Server 2019, 2016, 2012, 2008, 2003. Does not work with 2000 Server
- Linux
- 2TB or smaller will support Windows XP; larger than 2TB requires GPT support and does not support Windows XP
Package Content - CipherShield dual keys RAID 0 256-bit AES USB 3.2 Gen 2/eSATA encrypted external desktop SSD drive
- 4 Cipherkeys
- USB 3.2 Gen 2 A to B cable
- eSATA cable
- 12V 1.5A DC Full range switching power adapter
- User manual
|
|