Factory Sealed Juniper MIC-3D-20GE-SFP 20x10/100/1000 MIC for MX For Sale
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Factory Sealed Juniper MIC-3D-20GE-SFP 20x10/100/1000 MIC for MX
Price: US $119.31
Software release
Junos 13.2R2 and later
For information on which MPCs support this MIC, seeMIC/MPC Compatibility. For information on which MICs are supported on MX Series routers, seeMICs Supported by MX Series Routers.
Description
20 Gigabit Ethernet ports
Power requirement: 0.77 A @ 48 V (37 W)
Weight: 1.2 lb (0.54 kg)
Model number: MIC-3D-20GE-SFP-E
Name in the CLI:3D 20x 1GE(LAN)-E,SFP
Hardware features
High-performance throughput on each port at speeds up to 1 Gbps
Auto-negotiation between Gigabit Ethernet circuit partners
Up to 20-Gbps of full-duplex traffic
Maximum transmission units (MTUs) of up to 9192 bytes
Environmentally hardened for 32° F (0° C) to 131° F (55° C) operating temperatures
SEC PHY
Timing PHY
Software features
Optical diagnostics and related alarms
Virtual Router Redundancy Protocol (VRRP) support
IEEE 802.1Q virtual LANs (VLANs) support
Remote monitoring (RMON) EtherStats
Source MAC learning
MAC accounting and policing—Dynamic local address learning of source MAC addresses
Flexible Ethernet encapsulation
Multiple tag protocol identifiers (TPID)
Precision Time Protocol (PTP) or IEEE 1588v2
Media Access Control Security (MACsec)
Interfaces
Syntax: ge-fpc/pic/portwhere:
fpc: Slot in the router where the MPC is installed. The MPCs are represented in the CLI asFPC0throughFPC19.
pic: The logical PIC number on the MIC, numbered 0 or 1.Figure 2,Figure 3, andFigure 4illustrate the port numbering for the Gigabit Ethernet MIC with SFP (E) installed in the MX960, MX480, and MX240, respectively.
port: 0 through 9.
For example, ge-3/1/0 is the interface for port 0 in PIC 1 on the MPC installed in slot 3.
Figure 2,Figure 3, andFigure 4illustrate the port numbering for the MIC-3D-20GE-SFP-E installed in an MX960, MX480, and MX280, respectively.