Monoprice MP Select Mini 3D Printer V2 E3D Edition, Black, Used.
Recently upgraded to a bigger printer and no longer have a need for this one. Still works great. Completed a print less than a month ago on it. Power supply included.
I accidentally got some isopropyl alcohol on the screen a while back and it has slightly distorted the screen because of it. I tried to show this in the pictures but it is hard to tell. The screen is still completely operable and is easy enough to see everything on it, just not perfect.
Removed the stock bed surface which was a black sticker like material as it was showing age. A popular mod with these is to then use a sheet of 5\"x7\" glass from a dollar store picture frame to have a glass bed. That is what I have done and the prints come out incredibly smooth and stick great. It is much better than the stock material used. I will include two of these 5\"x7\" panes of glass (one still unopened with picture frame) that I have purchased from the dollar store (cheap and easy to find more if needed) which can then be attached to the bed using either blue painters tape (what I did) or binder clips. ***CAUTION ***The edges on these pieces of glass are quite sharp. I used painters tape on the edges to avoid getting cut by them.*** I removed the glass for shipping and it will need reattached (and leveled most likely). Do not print straight onto the bare metal bed.
Printed a filament guide for the top as well, which works well, but this can easily be removed if you do not want it.
I misplaced the clip for the left side of the fan on the extruder but secured it with titanium wire.
I replaced the nozzle on this less than 10 prints ago so it will be good to go for a while.
The A-10 sticker on the printer is also included. As well as a micro USB cable and Allen key to level the bed.
It will be shipped in the original box which means it has great protection due to the custom molded Styrofoam.
Only what is pictured will be included. No SD card.
If you have any other questions, please ask and I will be happy to answer.
Thanks!The Monoprice MP Select Mini 3D Printer V2 E3D Edition (Black) is a used 3D printer that comes with a glass bed. It has a nozzle size of 1.75mm and a maximum resolution of 100 microns (0.1mm). The printer features adjustable print speed and a heated build plate. It has a printing speed of 55mm/sec and a maximum print size of 120x120x120. The printer can be connected via Wi-Fi or USB 2.0.
