This listing is for one SuperMicroSuperServerSYS-5019S-M Server
Rail kit is included
Config is below
We can install any of the Open Source operating systems or hypervisors, reconfigure to spec and ship configured. Currently no OS is installed, any installations will be done upon request and will be billed separately
Additional adapters/network cards etc can be added via 1x PCI-e slot, please inquire.
4x drive bays are available for installation of additional drives, 2.5 or 3.5"
SAS drives can be used if raid adapter is installed
Config:Intel Xeon E3-1275 V5 4 Core/8 Threads 3.6 - 4.0 GHz CPU64GB DDR4 ECC RAM (4x 16GB 2133MT/s ECC Unbuffered DIMMs)1x 256GB PCI-e NVMe M.2 SSD2x 1GbE RJ45 NIC Intel i210-AT1x 350W Platinum PSU1x PCI-e 3.0 Slot x16 (x8 signal)Sliding rack mount rail kit
We can modify configuration to spec, please inquire
Thank youManufacturer Specs:
Product SKUsSYS-5019S-M
- SuperServer 5019S-M (Black)
Motherboard
Super X11SSH-FProcessorCPU
- Single Socket H4 (LGA 1151) supports:
- Intel® Xeon® processor E3-1200 v6/v5, Intel® 7th/6th Gen Core™ i3
- CPU TDP up to 80W
NoteBIOS version 2.0 or above is required to support Intel® Xeon® Processor E3-1200 v6 series or 7th Generation Intel® Core™ ProcessorsSystem MemoryMemory Capacity
- 4x 288-pin DDR4 DIMM slots
- Up to 64GB DDR4 ECC UDIMM
Memory Type
- 2400/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit, 288-pin (UDIMM) gold-plated DIMMs
DIMM Sizes
Memory Voltage
Error Detection
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
On-Board DevicesChipset
SATA
- SATA3 (6Gbps) via C236 controller
- RAID 0, 1, 5, 10 support
IPMI
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- ASPEED AST2400 BMC
Network Controllers
- Dual Intel® I210-AT Gigabit Ethernet LAN ports
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Video
Input / OutputSATA
LAN
- 2 RJ45 Gigabit Ethernet LAN ports
- 1 RJ45 Dedicated IPMI LAN port
USB
- 5 USB 3.0 ports (2 rear + 2 headers + 1 Type A)
- 6 USB 2.0 ports (2 rear + 4 headers)
Video
Serial Port / Header
- 2 COM ports (1 rear, 1 front)
SuperDOM
- 2SuperDOM(Disk on Module) ports with built-in power
PC Health MonitoringVoltage
- Monitors for CPU Cores, +3.3V, +5V, +12V, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
FAN
- Total of 5 fan headers supporting up to 5 fans
- 4 fans with tachometer status monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
Temperature
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- I2C temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
LED
- System Information LED
- Suspend static indicator LED
- UID/Remote UID
Other Features
- Chassis intrusion detection
- Chassis intrusion header
- RoHS, Halogen Free
ChassisForm Factor
Model
Width
Depth
Package
- 8.5" (H) x 24" (W) x 29.5" (D)
Weight
- Gross Weight: 30.4 lbs (13.8 kg)
- Net Weight: 17.6 lbs (8 kg)
Available Colors
Front PanelButtons
- Power On/Off button
- System Reset button
LEDs
- Power LED
- Hard drive activity LED
- 2 Network activity LEDs
- System Information LED
Expansion SlotsPCI-Express
- 1 PCI-E 3.0 x8 (in x16) AOC slot
M.2
- 1x M.2 Interface: PCI-E 3.0 x2
- Form Factor: 2280
- Key: M-Key
- Double Height Connector
Drive BaysHot-swap
- 4 Hot-swap 3.5" SATA3 drive bays
Peripheral DrivesOptional
- 2 Fixed 2.5" internal drives
BackplaneSAS/SATA HDD Backplane
(SAS support requires optional SAS controller)System CoolingFans
- 4x 40x28mm 4-pin PWM Cooling Fans
- Optional 1x 40x28mm PWM fan
Power Supply350W AC power supply w/ PFCAC Voltage
- 100-240 V, 50-60 Hz, 5.0-2.5 Amp
+5V
- Max.: 15 Amp
- Min.: 0.2 Amp
+5V standby
+12V
- Max.: 29 Amp
- Min.: 0.5 Amp
-12V
+3.3V
- Max.: 12 Amp
- Min.: 0.2 Amp
Certification Platinum Level Certified
[Test Report]System BIOSBIOS Type
- 8MB SPI Flash EEPROM with AMI BIOS
Operating Environment / ComplianceRoHS
Environmental Spec.
- Operating Temperature:
10°C to 35°C (50°F to 95°F) - Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F) - Operating Relative Humidity:
8% to 90% (non-condensing) - Non-operating Relative Humidity:
5% to 95% (non-condensing)