Specification: Chipset: ASIX MCS99100 Compliant with PCI Express Base Specification 2.0 Supports PCIe Power Management Data transfer rate: Up to 921Kbps Flow control: Hardware and Software Stop bits: 5, 6, 7, 8 and 9-bit serial format On-Chip 256 Byte depth FIFOs in Transmit, Receive path of each Serial Port Serial power output: 0V / 5V / 12V, configured by jumper Form factor: Full profile / Low profile Product: Dimensions (with full height bracket): 3.66\" (W) x 0.87\" (H) x 4.72\" (L) Weight: 0.10 lbs Color: Green Connectors: 4 x 9-pin D-sub, RS232 serial, Male (via fan-out cable) 1 x 4-pin, Molex mini-power connector 2 x 8-pin header, a jumper for power output Environmental conditions: Operating temperature: 32 to 140 degrees F Storage temperature: 14 to 158 degrees F Relative humidity: 5 to 90% RH (non-condensing) TAA compliant Certifications/Standards: FCC, CE, RoHS Warranty: 3 years limited Country of origin: Taiwan Compatibility Note: Replaces part # JJ-E40011-S4 Requirements PCI Express-enabled system with an available PCI Express slot Windows 10 / 8.x / 7 Server 2016 (32-/64-bit) / 2012 R2 / 2012 (32-/64-bit) / 2008 R2 / 2008 Package Contents DP CyberSerial 4S PCIe board Low profile bracket 4-Port fan-out cable (DFP-36pin) Y-Split power cable Voltage jumper (4pcs) Driver CD User manual
✅ Easily adds four RS232 DB9 serial ports through an available PCI Express slot with PCI Express 1-lane (x1) adapter works with any width PCI Express slot. ✅ Four high-speed 16550 UART RS-232 serial ports support asynchronous baud rates up to 921Kbps having Built-in 256-byte FIFO buffers dramatically increase data transmit/receive speed, especially under Windows multitasking environment. ✅ Works as standard RS-232 port or with 5V or 12V power output for devices that require power (such as handheld scanners, table scanners, POS displays, etc.) Power is configurable via jumpers with silk-screened settings on PCB for easy identification and setup ✅ Supports hardware and software flow control, 5, 6, 7, 8 and 9-bit serial format with Onboard power connector provides reliable power source for devices that require power. ✅ Dual-profile PCB design fits full size and low-profile system form factor with included full and low profile brackets.