SUNLU Nylon Like 3D Printer Resin

①【Nylon-like PA-like Polyamide Resin】SUNLU nylon-like resin will be cured when it absorbs 395-405nm UV light. It\'s recommended to print at 25°C, nylon-like resin is stronger and tougher than ABS-like or standard photopolymer 3D printing resin.②【Super Strong and Tough Resin】Nylon-like resin has very good toughness, it\'s strong and not brittle. Nylon-like resin is great for printing high-precision 3D models, users do not have to worry about damaging the printed models when removing supports.③【Ultra Durable and High Compatibility 】Nylon-like resin is very durable and has super good aging properties. During the R&D, SUNLU engineers tried to bake the nylon-like resin model in a dry box at 55℃ for 3 months, the model didn\'t age and crack.④【Low Shrinkage and High Precision】During the 3D printer resin development process, SUNLU engineers focused on how to reduce the volume shrinkage of the resin during curing to ensure high precision, fast curing speed and good stability.⑤【Leak-proof Bottle Design】SUNLU resin bottle has a leak-proof design patent, and the packaging process is strict, which reduces the damage to the bottle during transportation and ensures that the resin is delivered to the customer in good condition.

Matters needing attention:

1. Shake well before use. It is recommended to stand upside down three times and do not use resin in areas exposed to sunlight;

2. Do not take orally, keep away from children, wear gloves before use, avoid direct contact with skin, and maintain indoor ventilation; Do not enter the eyes. If in contact, rinse with plenty of water as soon as possible. If you feel unwell, seek medical attention in a timely manner;

3. After printing the resin model, it needs to be cleaned with high concentration alcohol (it is recommended to have a concentration above 95%, the higher the better) for about 30 seconds; After cleaning and drying with alcohol, perform secondary curing to achieve optimal performance;

4. Do not pour the resin used in the material tank back into the unused resin, and do not leave the resin unused in the material tank for a long time. (If not used for a long time, the resin can be introduced into the container and sealed with a cling film to prevent it from being contaminated and affecting the printing effect.);

5. Store at room temperature in a dark place, where sunlight contains ultraviolet rays and can cure photosensitive resins; It is recommended to store at an ambient temperature of 15-35 ℃. The lower the winter temperature, the higher the resin viscosity;

6. Sealed storage to avoid dust or moisture that may affect printing quality.

On Aug 10, 2023 at 03:36:45 PDT, seller added the following information:

On Jan 3, 2024 at 12:16:39 PST, seller added the following information: