StarTech.com Vertical Cable Management Duct and 8 Outlet Horizontal Rack Mount Power Strip Description

StarTech.com 3ft (1m) Vertical Cable Management Duct with Cover - 0U Open SlotFinger Duct Wire Raceway for 19 Inch Server Rack - Slotted Cord Channel(CMVER20UF) organize Your Cables In Any Rack Or Cabinet That''s 20u Or Larger,Using This Vertical Cable Management Panel. This 3-foot Vertical Cable ManagerGives You A Simple And Space-efficient Way To Organize The Cables In YourServer Rack. You Can Attach The Cable Manager Vertically Into Your Rack, ToNeatly Guide Cables Between Equipment That''s Mounted At Different Heights.the0u Cable Manager Offers Versatile Installation Options And Is Compatible WithMost Racks That Are 20u Or Larger. The Panel Features A 0u Design ThatDoesn''t Take Up Any Mounting Space, And With Simple Tool-less Installation,It''s Easy To Attach Or Reposition As Necessary.improve The Appearance AndAccessibility Of Your Rackthe Vertical Cable Manager Uses A Finger-duct MethodOf Cable Management, Which Includes A Cover Panel That Neatly Conceals TheCables That Are Running Through It. The Cable Manager Runs Vertically AlongThe Side Of Your Rack, To Neatly Guide Cables Between Equipment That''sMounted At Different Heights. This Provides A Tidy And Well-organized Way ToRun Cables From Devices Mounted Toward The Bottom Of Your Rack To OtherDevices Mounted Near The Top, Without Leaving A Mess Of Cables Hanging InBetween.having Neatly Organized And Routed Cables Not Only Improves TheAppearance And Accessibility Of Your Rack, It Also Makes It Easier For You ToInstall, Access And Maintain Rack Components.hassle-free Compatibility WithYour Rackfor Maximum Compatibility With Virtually Any Server Rack, You CanInstall The Cable-management Panel Using Mounting Holes That Are CommonlyFound On Most Rack Equipment. The Tool-less Mounting Method Attaches The CableManagement Panel To The Keyhole-shaped Mounting Holes That Are Built Into YourRack.the Horizontal Mounting Rail Method Attaches The Cable Management PanelTo The Horizontal Mounting Rails That Run Along The Side Of Your Rack.forRacks That Don''t Support These Installation Methods, You Can Al8 Outlet Horizontal 1U Rack Mount PDU Power Strip for Network Server Racks -Surge Protection - 120V/15A - w/ 6ft Power Cord (RKPW081915) The HorizontalRack Mount PDU delivers a cost-effective power distribution solution for yourserver rack or cabinet with 8-outlet (120V/15A). Hassle-Free EquipmentInstallation the 1U switched PDU strip can be mounted horizontally in anyserver rack 4 inches deep or greater, to supply eight 120V/15A powerports/outlets, and features a rugged steel casing to ensure maximumdurability. Protects your equipment the front of the surge protector featurestwo LEDs to indicate proper ground and surge detection while enabling you tocontrol the power state with an illuminated power/reset switch. To preventcostly breakdowns of connected devices, the rack mount PDU features a built-incircuit breaker and reset switch, ensuring dependable performance of vitaldata center equipment. This unit is backed by a lifetime StarTech warrantywith free technical support The Horizontal Rack Mount PDU delivers a cost-effective power distribution solution for your server rack or cabinet with8-outlet (120V/15A). Hassle-Free Equipment Installation the 1U switched PDUstrip can be mounted horizontally in any server rack 4 inches deep or greater,to supply eight 120V/15A power ports/outlets, and features a rugged steelcasing to ensure maximum durability. Protects your equipment the front of thesurge protector features two LEDs to indicate proper ground and surgedetection while enabling you to control the power state with an illuminatedpower/reset switch. To prevent costly breakdowns of connected devices, therack mount PDU features a built-in circuit breaker and reset switch, ensuringdependable performance of vital data center equipment. This unit is backed bya lifetime warranty with free technical support.

Features:

• The cable management duct with cover promotes passive cooling by routing wires away from equipment and keeping the server room tidy.
• The power strip provides 8 additional NEMA 5-15 outlets (120V/15A) with a 6 ft power cord for easily plugging in devices while keeping the rack mobile.
• The 1U rack design of the power strip is compatible with 19" server racks 4" or deeper and features LED indicators for ground and surge protection.
• The vertical-mount wire duct raceway of the cable management duct enables organizing networking cables in data centers with open slotted fingers on each side.
• The power strip features a built-in circuit breaker and reset switch to protect networking equipment.

Product Details:

• Brand
• Style: Finger Duct + Power Strip
• Installation Type: Self-Adhesive
• Brand: ‎StarTech.com
• Date First Available: ‎May 31, 2023

• Shipping
  • Most orders will be shipped within 1 business days once we receive your payment. Except on weekend or public holidays.
  • A shipping notification will be emailed to you once your order has been shipped.
  • International shipping via Global Shipping Program.
  • No shipping to AK, HI, PR, APO/FPO, US Protectorates and PO Box.
• Payment
  • We Accept Payment Via PayPal and All Major Credit Cards.
• Return
  • We stand behind our products. Items can be returned for exchange or full refund within 30 days from the date you receive your merchandise.
  • Return shipping is the responsibility of buyer unless the return is a result of our mistake (i.e., your receive the wrong item). We will pay for shipping replacement back to you if an exchange of the same product is requested.
• Contact us

  If you have any questions please contact us. We respond within 1 business day or less.