[Genuine]Sunhans4000mW 36dBm2.4GHz&5.8GHz IEEE 802.11/a/n/b/g Dual Band UAV WiFi Signal BoosterWirelessSignal Amplifier

Notes:

The aluminum alloy casing adopts CNC to resist interference; its good heat dissipation function allows you to worry about the performance of the equipment without worrying about the heat generated during use. Its superior shielding function fully protects the health of you and your family.

[Compatible with any 2.4GHz &5.8GHz wireless device]

Our product can support 2.4GHz &5.8GHz wireless Router/AP/ wireless bridge/wireless network card; 2.4GHz &5.8GHz wireless monitoring(NVR,DVR);2.4GHz &5.8GHz wireless microphone,RC drones,FPV device etc. For UAV,Routers,IP cameras, R/C helicopters, planes and cars,Walkie talkies,ZigBee, Robot...For House, Office,Hotels,Supermarkets, Hospitals,Parking Spaces...For WiFi Solution & Project : WiFi Hotspot Solutions,Access points,Smart home systems, Smart city IOT, RC Drones Platform,security camera system

[About Input power of Booster]

(output power of the device = input power of the amplifier),

Sunhans SHPro5824G4W booster input power 0~20dBm(18~19dBm will better),if the output power of the device is greater than 20dBm or the power is relatively small -2~6dBm,kindly let us know,we will give the suggestion to solove this question according to your actual situation.

[Maximum Output power]

In ideal situation,the max output power can be up to 4W(36dBm).This amplfier will boost the receive and transmit (RX and TX) power of your wireless device to about 36dBm.

After connected with Booster,the output power at the antenna end is transmit gain of booster + Output power of the device - Signal loss of Cable/Connector.

Features:

2.4GHz&5.8GHz, Max. 4000mW output power;

Aluminum-alloy case by CNC, anti-interference;

For house, office, UAV, IP cameras, RC equipment....

Technical Specifications:

Booster model: SHPro5824G4W

Operating range : 2.4~2.5GHz; 5.0~5.8GHz

Channel width: 20Mhz&40Mhz&80Mhz

Supported standards: IEEE 802.11b/g/n/a/ac

Operation mode: Bi-directional, half-duplex, time division duplex

Connector type: N-K female

Output power: 4000mW (36dBm)

Input power: 0 ~ 20dBm

Transmit gain: 16 ~ 19dB

Receiver gain: 10dB

Noise figure: ≤3.5dB typical

Frequency response: ±1dB over operating range

Power adapter: 12V/2A DC, 100~240V

Operating temperature: -20°Cto +70°C

Operating humidity: Up to 75% relative humidity

Material: Cast aluminum

LED light: Power status LED and activity status LED

Booster size: 130mm x 77mm x 24mm

Booster weight: 318g

Package included:

1 x SHPro5824G4W WiFi booster

1 x power supply (US/EU/UK Plug)

1 x user manual

Instructions on use:

1. Remove the antenna from the wireless device first.

2. Take out the SMA/N cable and connect the wireless device to the TO Radio port of the signal amplifier.

3. Connect the antenna to the other end of the signal amplifier (TO Antenna).

4. Plug in the power and it\'s done.

1. Please make sure whether item(s) you want to order is/are the right one(s) you need and we do advise that customer friends pre-contact us about relevant issue if you are not sure, to avoid possible extra waste caused by inappropriate choice.

2. Import duties, taxes and charges are not included in item price or shipping charges and Customs clearance are buyer’s responsibility. Please check with your local Customs authorities before purchase.

1. We accept direct order payment on itself.

2. Bulk orders can be accepted. Products are always full in stock, or can be customized for specific requirement after communication

1. Your item(s) will be shipped out within 1-2 business days after order payment has been successfully verified on platform.

2. In order for us to have PayPal seller protection, we only ship to address shown in your PayPal payment. We DO NOT ship to any other address requested by email or message.

3. We will pack your item(s) carefully and safely to avoid any damage during transmit; each package has its own tracking No., which will be provided on platform.

4. For ‘Standard Int\'l Shipping’, default shipping will be via China Post or Hongkong Post (if package contains battery inside, default shipping will be via Netherlands Post: Hongkong->Netherlands as transit->destination country). For ‘Expedited Int\'l Shipping’, default shipping will be via DHL, Fedex, Aramex or EMS, which depend on each specific case. Note that delivery times may vary, especially during peak periods.

1. We have 30 days’ warranty for money back. Refund will be issued after returning item has been received.

2. It’s buyer’s responsibility to contact us about replacement or refund issue within 30 days after defective item has been received; otherwise, we have to reject it. Buyer is responsible for return shipping cost in any cases.

3. All return items must be in original condition, in original boxes, and with all paperwork, parts and accessories; We are not responsible and do not accept any damaged return items. Buyers must pack the return item safely; Please note that your original shipping costs will not be refunded.

We are always aiming to provide you with nice products and services, as nice as we can. So if you meet with any problem or requirement, please don’t hesitate to contact us!

We are always here, just waiting for you.