When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Please note: The buyer is responsible for customs clearance and payment of duties.
If you have other configuration needs, you can contact us and we will customize it for you.
Product SKUsMBD-X11SSM-F Physical StatsForm Factor - 9.6" x 9.6" (24.38cm x 24.38cm)
ProcessorCPU - Intel® Celeron®, Intel® Pentium®, Intel® 7th/6th Generation Core i3 series, Intel® Xeon® processor E3-1200 v6/v5
- Single Socket LGA-1151 (Socket H4) supported, CPU TDP supports Up to 80W TDP
System MemoryMemory Capacity - 4 DIMM slots
- 64GB Unbuffered ECC UDIMM, DDR4-2400MHz
Memory Type - 2400/2133/1866/1600 MT/s SDRAM 72-bit, 288-pin gold-plated DIMMs
DIMM Sizes Memory Voltage Error Detection - Corrects single-bit errors
On-Board DevicesChipset SATA - Intel® C236 controller for 8 SATA3 (6 Gbps) ports; RAID 0,1,5,10
IPMI Graphics - 1 ASPEED AST2400 BMC port(s)
Network Controllers - Dual LAN with Intel® Ethernet Controller I210-AT
Input / OutputUSB - 3 USB 3 port(s) (1 Type A; 2 via header)
- 6 USB 2.0 port(s) (4 via header; 2 rear)
- 2 USB 3.0 port(s) (2 rear)
Video Output Serial Port - 2 COM Port(s) (1 header; 1 rear)
TPM Expansion SlotsPCIe - 1 PCIe 3.0 x8 (in x16 slot),
- 1 PCIe 3.0 x8,
- 2 PCIe 3.0 x4 (in x8 slot)
System BIOSBIOS Type - 128MB SPI Flash EEPROM with AMI BIOS
BIOS Features - Plug and Play (PnP)
- APM 1.2
- DMI 2.3
- PCI 2.3
- ACPI 1.0 / 2.0 / 3.0 / 4.0
- USB Keyboard support
- Hardware BIOS Virus protection
- SMBIOS 2.7.1
- UEFI 2.3.1
ManagementSoftware - SuperDoctor® 5, NMI,SUM,SPM, Intel® Node Manager,SSM,IPMI2.0, Watchdog
Power Configurations - Power-on mode for AC power recovery, ACPI Power Management
PC Health MonitoringVoltage - VBAT, System level control, Supports system management utility, Monitors CPU voltages, Chassis intrusion header, +5V standby, +5V, +3.3V, +12V
LED - UID/Remote UID
- CPU / System Overheat LED
Temperature - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Monitor 2 (TM2) support
- PECI
FAN - 5x 4-pin fan headers (up to 5 fans)
- Thermal control tachometer fan connectors
- Fan speed control
- Overheat LED indication
Other Features - WOL
- Node Manager Support
- CPU thermal trip support for processor protection
- Control of power-on for recovery from AC power loss
Operating EnvironmentOperating Temperature Range - 0°C - 50°C (32°F - 122°F)
Non-Operating Temperature Range - -40°C - 70°C (-40°F - 158°F)
Operating Relative Humidity Range - 8% - 90% (non-condensing)
Non Operating Relative Humidity Range - 5% - 95% (non-condensing)
On Nov 7, 2023 at 08:36:15 PST, seller added the following information:
|
|