2 ounce Tub per order Simply the Best !!! Please read article sent to me from a Model railroad expert in Finland !

Track cleaning, Linn Westcott, and No-Ox by Gary Published on 23rd Jul 2010 02:07 PM I know of no other more controversial subject than track cleaning. I am not posting this to convince anyone to give up a tried and true method that works for them. I am simply pointing out an easier way. This comes from my being inherently lazy, so any avid “track cleaners” can skip this post. If you hate cleaning track, read on.One of the things that Linn Westcott wrote back in 1965 was that (quote) “many model railroads are operated successfully without ever having to clean the track”. That was an eye opener for me. I bought the book that I quoted from (764 helpful hints for model railroaders) in the late ‘70’s but filed it away and forgot about it until I built my current layout over 5 years ago.All of the track was atlas code 80 nickel/silver with half of it new, and half 29 years old. I’ve known about No-Ox for some time, but like many of us I was brainwashed by track cleaning dogma, and didn’t try it. I had to clean my track weekly, or locos simply wouldn’t run right. An Aztec cleaning car helped somewhat, but I still had to clean track. I finally got fed up with the weekly ritual, remembered the book, and decided to give No-Ox a try. When Linn wrote his article No-Ox was in liquid form, and has since evolved into a paste form that resembles axle grease.I know what you’re thinking. WHO IN THEIR RIGHT MIND WOULD PUT GREASE ON THEIR TRACK? I went through the same thought process, but also believed that Mr. Westcott knew what he was talking about. I bought a quart can of it and went through an application method that I developed, and will share with you.An explanation of what No-Ox is, and what it does, is needed at this point. No-Ox (plastic safe) is a rust preventive with a corrosion inhibitor system that prevents the formation of oxides. It penetrates and chemically treats metals to convert the insulative, naturally occurring, oxide coatings to a surface that is a conductor.Nickel Silver rail has been said to have an oxide coating that is conductive, but since it is mostly copper, it will still form a non-conductive oxide. No-Ox prevents this. It works especially well when 2 metals come in contact with each other. Prime examples are loco wheels and track, internal loco contacts, turnout pivot points, or any other type of contacts. No-Ox doesn\'t wear off, because it becomes part of the rail or contacts by penetrating them.

Although unnecessary, any future cleaning of the rail, loco wheels, or other contact surfaces will not affect the chemical transformation, and this transformation is very long lasting. The increase in conductivity is so noticeable that you will think your loco engineer put sand on the track. It does not increase traction, but the increase in conductivity makes it seem like traction is improved. No-Ox will not repel dirt. Nothing can do that, but it SEEMS to do just that, and for years. It will reduce your cleaning to occasional light vacuuming. Period.

Sanchem (the maker of No-Ox) makes several variants; the one you want is NO-OX-ID “A SPECIAL”. To properly treat metals with No-Ox, a very small amount is used on the surface or surfaces. A waiting period of 24 to 48 hours allows the chemical process to take place, after which ALL TRACES OF THE PRODUCT ARE WIPED OFF, or otherwise removed.In my case, scenery was completed and all track was ballasted before applying. I felt that getting the track dirty after application would affect its performance, but it didn’t matter.All contaminants such as plaster, glue, or oil, should be removed prior to No-Ox application. The steps below are all VERY important and none should be skipped.
1. Use a mild abrasive such as fine sandpaper or a brite boy on all rails to remove any oxidation.
2. Wipe all rails with a rag and alcohol to remove any dirt and fine particles.
3. Vacuum all rails to ensure cleanliness.
4. Put very thin smears on your finger and rub it on your rails. The total amount of NO-OX-ID “A SPECIAL” that should be applied to 500’ of N scale track is about ¼ teaspoon. If you can SEE No-Ox on rails, you are putting TOO MUCH on! DO NOT APPLY MORE!
6. Run all your locomotives, EXCEPT ONES WITH TRACTION TIRES, (no rolling stock yet) over all of your track for at least 2 hours. You may notice some wheel slippage and skipping, (DO NOT PANIC) this ensures that all wheels get treated with No-Ox.
7. Remove all locomotives from track and wipe all rails with a clean rag to remove any excess product. Don’t scrub, just rub.
8. Wait 24 hours.
9. Wipe rails again. Rag will be black.
10. For locos with traction tires, turn them upside down, connect track power so that wheels turn. Put a small dab of No-Ox on a Q-tip and apply to all wheels that DON’T have traction tires. While wheels are still turning, use a clean Q-tip to remove any excess No-Ox.
11. Run trains and forget about cleaning your track except for occasional light vacuuming.THE ABOVE 11 STEPS WERE REVISED 6-10 TO ADDRESS TRACTION TIRE ISSUES AND ARE NOT INCLUDED IN BAR MILLS DIRECTIONS.If you still have a slippage problem, you may have too much on loco wheels. Clean off excess with a clean rag or Q-tip. You don’t want the rails slippery. What you are looking for is an almost MICROSCOPIC layer that will replace the insulating oxide coating with a long lasting conductive rail.If you are worried about scratches on your rail from the brite boy, once you’ve applied No-Ox, you can throw it away because you won’t need it any more.I applied No-Ox to my layout 5 years ago, and have experienced skip free running ever since. This is even after periods of no running for as long as a month. I HAVE NOT CLEANED MY TRACK IN 5 YEARS! An added bonus is that the No-Ox has changed my loco wheels into better conductors, as I have not had to clean them either. The results it produces are truly amazing and will make you wonder why you ever cleaned your track. No-Ox resembles grease, and therefore creates a natural resistance in the minds of some modelers. The fears are totally unwarranted, and the product has been successfully used on model railroads for over 45 years. About 6 months ago I had a loco that started skipping badly. It was a Concor SW1200, and never did run that well. I decided to disassemble and discovered that the contacts were full of grease and dirt. I cleaned it all off and put a pinhead sized bit of No-Ox on the contacts. I reassembled and ran it on my track. The loco now runs better than it ever did, no skipping, and will run VERY slow. I have a video if anyone is interested.I’m not the only one that has used No-Ox. Perhaps the most notable is Art Fahey of Bar Mills. He told me that he has been using No-Ox since the 70’s and that quote: “My N scale layout runs like a watch because of it (after wasting about $200 on track cleaning cars)”. He mentioned that he couldn’t understand why more model railroaders weren’t using it. - 23rd Jul 2010, 02:39 PM

I have been using various types of NO-OX products for over 40 years in many applications.

I first learned about it while I was still in military service. I was a newly commissioned 2nd Lieutenant and as tradition serves, the most junior Officer in a unit got to be known as the SLJO (Scrubby Little Jobs Officer). Among other things I was designated the Corrosion Control Officer. My efforts as CCO was rewarded with favorable comments on my Fitness Reports for the next two years. I attribute this to the use of NO-OX products. - 23rd Jul 2010, 03:27 PM

Another No-Ox user here. Not for model RR though, but now I think I will. We use them in tube amps in the sockets. Always playing around with different tubes and got tired of spraying various \"cleaners\" before insertion. Used 1 application on each amp and have not used anything else nor cleaned them since.~SeanMoose nailed it. No-Ox is a \"little dab\'l do ya\" product. We\'re talking microscopic coating here. The key is: IF YOU CAN SEE NO-OX GOING ON, YOU ARE USING TOO MUCH.The active ingredient in No-Ox is the rust inhibitor, which PENETRATES the rail. This is what makes it work, and for a long time. It WILL NOT rub off with a rag, but more vigorous cleaning with an abrasive may remove some of the rail, and therefor, some of the protection. If No-Ox was in a liquid form, like it was in the \'70s, there would be no need for the carrier (the stuff that looks like grease) of the rust inhibitor. The carrier will dissipate with time and cleaning, but a heavier than necessary application will require more cleaning and more time for the carrier to dissipate.In my case, and with the majority of the testimonials I received, scenery and ballasting was completed before application, but no one has complained, that did the application first. - 16th Oct 2010, 06:56 PM

Ok, so it has been almost two months now and I have to say, ALL of my locomotives are still running perfect and there has been NO track cleaning. One thing I have noted though, is that I still wipe my rails from time to time and I still get the black residue off of them. I know I put it on thick but not THAT thick. I think locomotives are picking up bits and pieces here and there and recoating the track as I am sure some rolling stock does as well. I do still find tiny deposits here and there in turnouts or between gapped rails. I am experiencing NO slipping and all locomotives are running great. Overall I have to rate this experience VERY positive!