UBB Store


Raspberry Pi CNC Hat V2.60 - GRBL v1.1 Compatable - Uses Pololu Stepper Drivers For Sale


Raspberry Pi CNC Hat V2.60 - GRBL v1.1 Compatable - Uses Pololu Stepper Drivers

This item has been viewed 103141 times.

Raspberry Pi CNC Hat V2.60 - GRBL v1.1 Compatable - Uses Pololu Stepper Drivers:
$33

Specifications:
New in Version 2.60
  • Added a I2C Grove connector that connects to the Raspberry Pi's I2C pins(3.3V only). This makes it very easy to add Grove sensors , inputs or outputs directly to the raspberry Pi.
  • Cleaned up design with embedded Arduino Uno compatible micro-controller (ATMEGA328).
  • The hat can now be programmed directly from the Raspberry Pi.
  • Pre-loaded with the latest GRBL firmware v1.1.
  • Compatible with other firmware like Firmata for use in robotic / automation projects.
Features:
  • GRBL V1.1 PWM compatible. (Open source firmware that turns G-code commands into stepper signals)
  • 3 Axes (XYZ) +4th that can clone X/Y/Z
  • Added circuitry for End-Stop and Probe signal filtering. This eliminates false triggers and makes it possible use non-shielded cable for end-stops/probes.
  • Breakout pins to connect external Stepper Drivers like Gecko Drivers.
  • Uses removable Pololu A4988 compatible stepper drivers. (A4988, DRV8825 and others)
  • Uses removable screw connectors to make it very easy to wire up.
  • End Stop for each Axis and Probe.
  • Variable Speed Spindle / Laser Intensity control (PWM Spindle pin and Direction pin)
  • Coolant control pin. (Extra output pin)
  • Jumpers to set the Micro-Stepping for each stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping )
  • Runs on 12-30V DC. (At the moment only the Pololu DRV8825 drivers can handle up to 36V so please consider the operation voltage when powering the board.)
  • Assembled board ready to run.
  • Compatible with Raspberry Pi Models :
    • Raspberry Pi 3 and B+
    • Raspberry Pi 2
    • Raspberry Pi B+ (The one with the 40 pin headers.) (It is possible to use the Raspberry Pi Zero but the board will need extra style="font-family: Arial; font-size: 14pt;">
    • Assembled Raspberry Pi CNC Hat
    • Green removable screw connectors. (7 in total with each having 4 pins)
    • Copper Mounting Spacers and screws
    Not included:
    • Raspberry Pi
    • Stepper Drivers
    Extra details and Discussion Forums on our website
    Extra options:
    • External Driver Kit
    • Pre-configured 8GB SD card with heaps of CNC software.
    • Please have a look at our other lists for more options...



    Buy Now


Other Related Items:



RASPBERRY PI 2 V1.2 - Model B. 1GB RAM, Quad Core CPU (Worldwide Free Shipping)
RASPBERRY PI 2 V1.2 - Model B. 1GB RAM, Quad Core CPU (Worldwide Free Shipping)


SIM900 Quad-band GSM/GPRS Shield for Arduino UNO/MEGA/Leonardo
SIM900 Quad-band GSM/GPRS Shield for Arduino UNO/MEGA/Leonardo


RASPBERRY PI 2 - Model B. 1GB RAM, Quad Core CPU
RASPBERRY PI 2 - Model B. 1GB RAM, Quad Core CPU


Raspberry Pi CNC Hat V2.60 - GRBL v1.1 Compatable - Uses Pololu Stepper Drivers
Raspberry Pi CNC Hat V2.60 - GRBL v1.1 Compatable - Uses Pololu Stepper Drivers


Raspberry Pi 3 - Model B - Brand New 2016 Wifi + Bluetooth 64bit 1.2GHz QuadCore
Raspberry Pi 3 - Model B - Brand New 2016 Wifi + Bluetooth 64bit 1.2GHz QuadCore


Ham It Up v1.3: RF Upconverter For SDR (HackRF, RTL-SDR); MF/HF Converter R820T2
Ham It Up v1.3: RF Upconverter For SDR (HackRF, RTL-SDR); MF/HF Converter R820T2


FLIRC USB (2nd Gen) Dongle for Media Centre / Raspberry Pi / XBMC / Kodi
FLIRC USB (2nd Gen) Dongle for Media Centre / Raspberry Pi / XBMC / Kodi


Raspberry Pi 3 Model B 1GB Quad Core 1.2GHz 64bit CPU Wifi Bluetooth Starter Kit
Raspberry Pi 3 Model B 1GB Quad Core 1.2GHz 64bit CPU Wifi Bluetooth Starter Kit


4 IN 1 Raspberry Pi 3 Kit Assembled Model B Module + Case + Fan + Heatsink
4 IN 1 Raspberry Pi 3 Kit Assembled Model B Module + Case + Fan + Heatsink