SUNLU Resin 1KGLift HeightLift SpeedReturn/Descent SpeedNumber of Bottom LayersBottom Exposure TimeLayer Exposure TimeFeatureStandard Resin6-10mm(for machines over 7 inches, it is recommended to lift more than 8, and for machines over 10 inches, it is recommended to lift more than machine:20-80s

Black-White machine：10-60s

Color machine:4-15s

Black-White machine:2-4s

Standard photosensitive resin, suitable for beginners and model figurine printing; Easy to shape, good precision, low odor, and high cost-effectiveness.Standard Plus machine:30-80s

Black-White machine:20-60s

Color machine:4-15s

Black-White machine:1.5-4s

Compared to rigid resins, it has better accuracy and toughness; Easy to shape, low odor, high cost-effectiveness;Toughness machine:20-80s

Black-White machine:10-60s

Color machine:4-15s

Black-White machine:1.5-4s

Hardness 72D, suitable for printing models with high toughness requirements;

Low odor and low shrinkage; Good toughness, average strength; Can be drilled and tapped;

Suitable for printing solid and engineering parts, it is not recommended to print models with finer supports;

ABS-Like machine:20-80s

Black-White machine:10-60s

Color machine:4-15s

Black-White machine:2-4s

The comprehensive performance of stretching, bending, and toughness is relatively good, and it can be drilled and tapped;

Better toughness than rigid resin, with certain drop resistance, the model is not easily broken when dropped;

Forming is similar to ABS material, with good aging resistance, suitable for models that require a certain degree of toughness;

Matters Needing Attention

• Usage period: use within one year for best results.
• This product is not edible, if swallowed by mistake, please seek medical attention immediately.
• Do not use resin in places exposed to sunlight.
• Please shake well before use, it is recommended to shake upside down three times.
• Wear gloves, protective masks and other protective equipment when using photosensitive resin.
• Please clean the printed resin model with high-concentration alcohol for about 30S.
• It is recommended to use a 95% concentration of alcohol or more to clean the printed model, the higher the better.
• In order to obtain better results, the cleaned(alcohol has dried) model can be secondarily cured.
• Do not pour resin from the container into the unused resin.
• Do not leave the resin in the container for a long time without using it, to prevent the resin from being contaminated.

• Resin Storage Methods

Please store away from sunlight, as sunlight contains ultraviolet rays which will cure the photosensitive resin.
It is recommended to store the resin in a cool dry place at 15-35°C. Resin viscosity will become higher when the temperature gets lower.
Please keep it sealed to avoid dust or moisture affecting the print quality.

Contact us

The best way to contact us is by messages.
We always reply messages that are sent to us with an inquiry, usually within 24 hours of receipt or sooner. We will answer all messages during our business hours. (Monday - Friday 9:00 am to 6:00 pm HKT except all Holidays)
Please do not leave any low detailed seller ratings, neutral or negative response before contacting us.
We commit you 100% satisfaction guarantee.

response

1.We will appreciate a positive response with all 5 star rating when you aresatisfied.

2.Our goal is to make sure you are a happy buyer and have a pleasant shopping experience with us.

3.Please email us before leaving any 1 or 2 ratings, negative response or open any dispute.

4. We understand the concerns and frustrations that occasionally occur, and appreciate the opportunity to assist you in resolving any problem associated with your purchases.