【Higher Toughness & Impact Strength】Toughness and impact strength of ELEGOO PLA Plus is apparently enhanced. It’s also low warpage and shrinkage, bringing excellent results for printing functional parts or other projects.【Less-tangle & Neatly Wound】Full mechanical winding and strict manual inspection ensures that all pla+ filaments are neatly wound, which effectively reduces tangles, snap and line breakage issues.【Top-Notch Accuracy & Consistent】Precise production process guarantee ELEGOO PLA Plus filament of 1.75mm diameter, accuracy of +/- 0.02mm.【No Clogging & No Bubbles】Complete dried before packing and well vacuum sealed protect the filaments from moisture and dust,no clogging and bubbling. Perfectly compatible with most 1.75mm FDM 3D printers on the market.

• This "Buy 6 get 4 free" campaign requires you to add 10 items to the shopping cart and then pay together. will automatically calculate the discount, you only need to pay for 6 pieces.
  🔺For example
  If you want to get 10pcs, please add 10pcs to cart. And you only need to pay for 6pcs.
  If you want to get 20pcs, please add 20pcs to cart. And you only need to pay for 12pcs.PLA+ FILAMENT Specially Design for 3D Printing

  Technical Specifications

  • Density: 1.25g/Cm³
  • Melt Index: 10(190°C/2.16kg)g/10min
  • Tensile Strength（X-Y): ≥ 60mpa
  • Elongation At Break（X-Y): 23%
  • Bending Strength:80mpa
  • Bending Modulus:1911mpa
  • Charpy Impact Strength:9j/M²
  • Thermal Deformation Temp: 53°C(0.45mpa)
  • Fan: 100%
  • Line Length: (1.75mm) 330-335m
  • Rockwell Hardness: 88
  • Print Layer Thickness: 0.2mm
  • Recommended Extrusion/Nozzle Temp: 200~230°C(Recommended 215°C)
  • Recommended Heated Bed Temp: 50-65°C
  • Printing Speed: 30-70mm/S
  • Recommendation Platform: PEI/Glass/Fiberglass Board+Pvp Glue Stick Or Textured Paper