Xeon Tylersburg ServerBoard w/ IPMI Onboard
Key Features
1. Intel® Xeon® processor 5600/5500
series, with QPI up to 6.4 GT/s 2. Intel® 5520 (Tylersburg) Chipset 3. Up to 192GB DDR3 1333/ 1066/ 800MHz
ECC Registered DIMM / 48GB
Unbuffered DIMM 4. Intel® 82576 Dual-Port Gigabit
Ethernet 5. 6x SATA2 (3 Gbps) Ports via
ICH10R Controller 6. 1 (x16) PCI-E 2.0,
2 (x8) PCI-E 2.0,
1 (x4) PCI-E (in x8 slot),
2x PCI 33MHz slots 7. Integrated Matrox G200eW Graphics 8. Integrated IPMI 2.0 with Dedicated LAN
Links & Resources Tested Memory List Tested HDD / SSD List Motherboard Manual Update Your BIOS IPMI Firmware Download the Latest Drivers and Utilities


Product SKUs MBD-X8DTi-F-B

• X8DTi-F (Bulk Pack)

Physical Stats Form Factor

• Extended ATX

Dimensions

• 12" x 13" (30.5cm x 33cm)

Processor/Cache CPU

• Dual 1366-pin LGA Sockets
• Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
• Intel®
  Xeon®Processor 5600 Series (Westmere)
• Intel®
  Xeon®Processor 5500 Series (Nehalem-EP)

QPI

• up to 6.4 GT/s

System Memory Memory Capacity

• 12x 240-pin DIMM sockets
• Supports up to 192 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory
• Supports up to 48 GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory
• Memory Mirroring supported

Memory Type

• 1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs

DIMM Sizes

• 1GB, 2GB, 4GB , 8GB , 16GB

Memory Voltage

• 1.5 V / 1.35V

Error Detection

• Corrects single-bit errors
• Detects double-bit errors (using ECC memory)
• Supports Intel® x4 and x8 Single Device Data Correction (SDDC)

On-Board Devices Chipset

• Intel® 5520 (Tylersburg) chipset
• ICH10R + IOH-36D

SATA

• Intel ICH10R SATA 3.0Gbps Controller
• RAID 0, 1, 5, 10 support (Windows)
• RAID 0, 1, 10 support (Linux)

IPMI

• Support for Intelligent Platform Management Interface v.2.0
• IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
• Winbond® WPCM450 BMC

Network Controllers

• Intel® 82576 Dual-Port Gigabit Ethernet Controller
• Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
• Intel® I/OAT 3 support for fast, scaleable, and reliable networking
• VMDq support for better performance of virtualization
• 1x Realtek RTL8201N PHY (dedicated IPMI)

Graphics

• Matrox G200eW

Super I/O

• Winbond 83627HG chip

Input / Output Serial ATA

• Six Serial ATA ports
• Six SATA hard drives supported

Floppy

• 1 Floppy controller; 1.44 MB

LAN

• 2x RJ45 LAN ports
• 1x RJ45 Dedicated IPMI LAN port

USB

• 2x USB rear ports
• 2x USB on-board
• 4x USB internal headers
• Total 8 USB 2.0 Compliant

VGA

• 1x VGA Port

Keyboard / Mouse

• PS/2 keyboard and mouse ports

Serial Port / Header

• 1 Fast UART 16550 serial port
• 1 Fast UART 16550 serial header (Option)

Chassis ( Optimized for X8DTi-F ) 1U Chassis

• CSE-812L-600CB
• CSE-815TQ-560CB

2U Chassis

• CSE-826A-R1200LPB
• CSE-826E1-R800LPB
• CSE-826E16-R1200LPB
• CSE-826E2-R800LP
• CSE-826E26-R1200LPB
• CSE-826TQ-R800LPB

3U Chassis

• CSE-836E1-R800B
• CSE-836E16-R1200B
• CSE-836E2-R800B
• CSE-836E26-R1200B
• CSE-836TQ-R800B
• CSE-933E1-R760B
• CSE-933E2-R760B
• CSE-933T-R760B
• CSE-936A-R1200B
• CSE-936A-R900B
• CSE-936E1-R900
• CSE-936E16-R1200B
• CSE-936E26-R1200B

Tower / 4U Rackmount

• CSE-745TQ-920B
• CSE-846E1-R900B
• CSE-846E2-R900
• CSE-846TQ-R900B

Important Chassis Notes

• To support the new generation Intel® Xeon® processor-based motherboards, a Revision K chassis is recommended for most models. Please talk to your sales representative or follow the link for details.

Expansion Slots PCI-Express

• 1 (x16) PCI-E 2.0 slot
• 2 (x8) PCI-E 2.0 slots
• 1 (x4) PCI-E slot

PCI

• 2x 33MHz PCI slots

System BIOS BIOS Type

• 32Mb SPI Flash EEPROM with AMI® BIOS

BIOS Features

• Plug and Play (PnP)
• PCI 2.2
• ACPI up to 3.0
• USB Keyboard support

Management Software

• IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
• SuperDoctor® III

Power Configurations

• ACPI / ACPM Power Management

PC Health Monitoring Voltage

• Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages.
• 6-Phase-switching voltage regulator

FAN

• Total of eight fan headers supporting up to 8 fans
• Eight 4-pin fan headers
• 8x fans with tachometer status monitoring
• Support 3-pin fans (w/o speed control)
• Low noise fan speed control (4-pin fan only)

Temperature

• Monitoring for CPU and chassis environment
• Thermal Control for 8x fan connectors
• PECI

Other Features

• Chassis intrusion detection
• Chassis intrusion header

Operating Environment / Compliance RoHS

• RoHS Compliant 6/6, Pb Free

Environmental Spec.

• Operating Temperature: 10° to 35° C (50° to 95°F)
• Non-operating Temperature: -40° to 70° C (-40° to 158° F)
• Operating Relative Humidity: 8% to 90% (non-condensing)
• Non-operating Relative Humidity: 5 to 95% (non-condensing)

Parts List (Bulk Pack) Part Number Qty Description X8DTi-F MBD-X8DTi-F
1 X8DTi-F Motherboard I/O Cable 1 CBL-0044L 2 57.5CM SATA FLAT S-S PBF I/O Shield MCP-260-00027-0N 1 STD I/O SHIELD FOR X8, H8, X7SB3 SERVER MB (3RD LAN + 4XLAN)

Terms and Conditions

Hours of Operation

Our business hours are 10am to 5pm PST Monday through Friday. All email requests will be addressed within 24 hours.

International Buyers
Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to offerding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges.

Returns or Exchanges

Returns postmarked within 30 days of the delivery of the original shipment will be accepted with 20% restocking fee, no returns allowed after 30 days. All returns must be approved by SMCI Express’ Customer Relations who will issue a Return Merchandise Authorization (RMA) number. If the item is defective and is under warranty, please contact us and we will assist you in pursuing a warranty claim with the manufacturer.

Payment

We proudly accept PayPal. If another form of payment needs to be used please contact us first. We can work with most payment methods. California residents will be charged 8.25% sales tax.

Shipping Info

We ship items worldwide, including APO / AEO address, via Fedex or US Postal Service. Items will be shipped within 2 business days upon receiving payment although in most cases they are shipped same or next day. Feel free to email us to confirm product availability and shipping date.

On May-18-12 at 01:23:36 PDT, seller added the following information: