10pcs Passive PoE Injector/ Splitter

IEEE 802.3af Mode-B(4,5+/7,8-) 9-48V/1A

This is a Passive PoE Injector (or Splitter), you need an extra 5.5*2.1mm DC port Power adapter if you need it works as a Injector. While if it works as a Splitter, then you need another male to male DC cable, the port is 5.5*2.1mm (the DC cable is available in our store)

This Adapter only support 10/100M connection, do not support gigabit ethernet connection, because "PoE" port use 4,5,7,8 pin as power transfer. Please do not connect any gigabit ethernet device on "PoE" port, this will damage your device.

As a Injector, the "PoE" out port is an 802.3af, but it does NOT include the 802.3af compliant detection feature. It supplies power NO MATTER WHAT, so don't plug the "PoE" side into anything that isn't ready for it.

When works as Injector,this"PoE" out port is compatible with all 802.3af devices as Wireless Access Point, IP Phone, IP camera, Gateway , Switch, or More.....

Specification:

ModelPSI-348Product NameSimple POE Injector / SplitterDataPIN 1/2 & 3/6PowerPIN 4/5+ & 7/8Data inConnects of materialABS 94V-0Ethernet Data rate10/100 MbpEthernet CableTIA/EIA 568 Cat.5Ethernet Cable ConnectorRJ-45Operating Temperature0 - 40 DegreeStorage Temperature-40 - 70 DegreeOperating Humidity10% to 80% RHStorage Humidity5% to 90% RH

Item Included:

Passive PoE Injector Adapter x10