Description:USB 2.0 9pin 10pin Header 1 to 4 Female Splitter Extension Cable HUB with IDE 5V Power Connector Adapter Port MultilierThe cable can be used to connect internal usb 9pin devices,e.g. 4 cards with 9pin connector to a controller with usb2.0-9pin connector.The IDE 4pin connector can connect the extral 5V power to the board.With back glue, can be directly fixed on the main board or chassis.It can extend your motherbord 9pin connector to 4*9pin connectors.Qty:2PcsCable Length:50cmFeature:
Product interface: USB2.0 9PIN
Fully compatible with Universal Serial Bus Specification Revision 2.0 (USB 2.0);
The port supports both high-speed (480MHz) and full speed (12MHz) modes;
Four USB 2.0 downstream ports, supporting high-speed (480MHz), full speed (12MHz), and low-speed (1.5MHz) modes;
Integrated USB 2.0 transceiver;
※ USB power output: up to 5V 1A (after using power)
※ Built in large 4PIN enhanced power interface
※ Supports USB hot plug and unplug function
Supports systems such as Windows XP/2003/Vista/win7/win8/2003/10 and above.Product advantages:
A： Adopting For Terminus' FE2.1 main control.
B： This chip has fast speed and good compatibility
C： Added external SATA 15PIN interface to increase USB power supply current
D： The expansion card uses two high-performance solid-state capacitors, greatly ensuring the stability of USB power supply.Wiring method:Insert the 9PIN cable into the motherboard 9PIN socket to transfer 4 9PINs.USB 2.0 has a dual row of 10 pins, with one pin already unplugged to prevent confusion, hence it is also known as 9 pinsPackage included:2Pcs USB 2.0 9pin 10pin Header 1 to 4 Female Splitter Cable HUB with AdaptersNote:Be careful not to plug the power supply in the wrong direction!1. Please allow 0.5-1cm differences due to manual measurement.2. Due to the light and screen difference, the item's color may be slightly different from the pictures.
On Mar 19, 2025 at 21:48:05 PDT, seller added the following information:
