Premium Listing Welcome to our stores
Handpicked Quality Products Just For You
2Pcs NRF24L01+PA+LNA RF Wireless Transceiver Module with SMA Antenna 2.4G 1100m & Wireless Module with Breakout Adapter On-Board 3.3V Regulator Product Gallery Product Description
- NRF24L01+PA+LNA Wireless Transceiver Module is a 2.4GHz ISM band transceiver, compatible with Raspberry Pi. Auto-acknowledge and auto-retransmit abilities; Support up to six channels of data reception; the transceiver come with power amplifier and SMA antenna, which make the effective communication distance has been greatly expanded.
- A host microcontroller can communicate and configure the nRF24L01+ over a 4-pin Serial Peripheral Interface (SPI). The configuration registers are accessible through the SPI connection. Configurable parameters include frequency channel (125 selectable channels), output power, and data rate (data rates: 250kbps, 1Mbps, and 2Mbps).
- RF24L01+ Breakout Adapter: Small power on SMD LED indicator, On-board 3.3V voltage regulator, which accepts +5V power supply input and provides 3.3V for the attached "nRF24L01+" module.
- Applications:It can be wildly used in wireless remote control such as RC planes/vehicles, wireless audio, wireless voice transmission such as VoIP, wireless networks, smart home,somatosensory devices, RFID, NFC etc.
- Package Included:2 x NRF24L01+PA+LNA Wireless Transceiver Module+2 x SMA Antenna+2 x NRF24L01+ Breakout Adapter
Product Highlights
this module also come with power amplifier and SMA antenna, which make the wireless communication up to 800+ meters with No Wireless Transceiver Module:
PA Gain：20dB
LNA Gain：10dB
Range: 800+ meters line of sight
Frequence: 2.4GHz~2.5GHz
Multi-frequency: 125 frequency
Operating voltage: 3 ~ 3.6V Max（Recommended 3.3V）
Max Transmit Operating Current: 115mA
Max Receiving Operating Current:45mA
Support up to six channels of data reception
NRF24L01+ Breakout Adapter:
compatible with Arduino and for Raspberry Pi
Pin Quantity：8Pin
On-board ：AMS1117-3.3 chip.
Voltage Regulator Input Voltage (connected to VCC): 4.8V ~ 12V
Small power on SMD LED indicator
Note:
1.The module has 5V tolerant inputs, the power supply must be 3.3V, but the data and control inputs can be 5V(I/O can be 5V).
2.If you are the first time to do this job, pls refer to related wiring video on before connect lines. the module used with RC planes/cars, please note:
1. If only a single reception and a single transmission are used, then a code value is required.
2. Please pay attention to environmental interference during use.
Package Included:
2 x NRF24L01+PA+LNA Wireless Transceiver Module
2 x SMA Antenna
2 x NRF24L01+ Breakout Adapter
Thank You For Choosing Our Products
Your satisfaction is our top priority
100% Satisfaction Guaranteed Contact Us
For any inquiries about your order, please contact us through 's messaging system 24/7
We aim to answer all questions within 24 hours
Payment Methods
We accept multiple payment options through 's secure system:
Your payment is protected through 's secure payment system
Shipping Information
- Your item will be shipped to the address listed on your account. Please confirm your address before completing the purchase.
- Delivery typically takes 3-7 business days
- Shipping services via UPS, FedEx, and USPS
- We ship only to the 48 contiguous United States
- We cannot ship to Alaska, Hawaii, or U.S. territories
- No shipping to APO/FPO addresses or P.O. Boxes
- Local pickup is not available
24/7 Shipment Tracking Available Customer response
We value your response and suggestions to improve our service
Customer satisfaction is our ultimate goal. If you have any issues, please contact us before leaving response.
Return Policy
30-Day Satisfaction Guarantee
- If you're not satisfied with your purchase, contact us within 30 days of receiving your item
- We'll work with you to arrange a replacement or refund as appropriate
- Please contact us to obtain the return address before sending back any items.
- Refunds will be processed within 3-5 business days after we receive your return
