When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Product SKUsSYS-6028U-TR4T+ - SuperServer 6028U-TR4T+ (Black)
Motherboard Super X10DRU-i+Processor/CacheCPU - Intel® Xeon® processor E5-2600v4†/ v3 family (up to 160W TDP)*
- Dual Socket R3 (LGA 2011)
Cores / Cache - Up to22 Cores†/ Up to55MB†Cache
System Bus Note†BIOS version 2.0 or above is requiredNote* Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. System MemoryMemory Capacity - 24x 288-pin DDR4 DIMM slots
- Up to 3TB†ECC 3DS LRDIMM, 1.5TB ECC RDIMM/LRDIMM
Memory Type - 2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
- 2666/2400 ECC DDR4 NVDIMM
DIMM Sizes - RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB
- LRDIMM: 64GB, 32GB
- 3DS LRDIMM: 128GB
- NVDIMM: 16GB
Memory Voltage Error Detection - Corrects single-bit errors
On-Board DevicesChipset SATA - SATA3 (6Gbps) with RAID 0, 1, 5, 10
IPMI - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- ASPEED AST2400 BMC
Network Connectivity - 4x 10GBase-T ports viaAOC-2UR6-i4XT
- Intel® X540 10GBase-T
- 1x Realtek RTL8211E PHY (dedicated IPMI)
Graphics Input / OutputSATA SAS - 12x SAS3 ports support via optional Add-on Card
LAN - 4x RJ45 10GBase-T LAN ports
- 1x RJ45 Dedicated IPMI LAN port
USB - 5x USB 3.0 ports
(2 rear, 2 onboard header, 1 Type A)
Video Serial Port / Header DOM - 2x SuperDOM(Disk on Module) ports
System BIOSBIOS Type - 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features - Plug and Play (PnP)
- APM 1.2
- PCI 2.3
- ACPI 1.0 / 2.0 / 3.0 / 4.0
- USB Keyboard support
- SMBIOS 2.7.1
- UEFI 2.3.1
ManagementSoftware - SuperDoctor® 5
- Intel® Node Manager 3.0
- Watch Dog
- NMI
- SUMandSSM
- Optional IPMI 1.5 / 2.0
Power Configurations - ACPI Power Management
- Power-on mode for AC power recovery
ChassisForm Factor Model Height Depth Weight - Net Weight: 36 lbs (16.4 kg)
- Gross Weight: 72 lbs (32.7 kg)
Available Colors Front PanelButtons - Power On/Off button
- System Reset button
LEDs - Power status LED
- HDD activity LED
- 2x Network activity LEDs
- System information (overheat/UID) LED
Expansion SlotsPCI-Express - 1x PCI-E 3.0 x16 slot (FH, 10.5" L)
- 6x PCI-E 3.0 x8 slots
(4x FH, 10.5" L, 1x LP, 1x Internal LP)
(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram andAOC Supportfor details.)
Drive BaysHot-swap - 12x Hot-swap 3.5" Drive Bays:
- 12x SAS3 (HBA required)
Backplane2U SAS/SATA/NVMe Expander backplane BPN-SAS826A-EL1N4System CoolingFans - 4x 8cm heavy duty PWM fans
Power Supply1000W Redundant Power Supplies with PMBusTotal Output Power - 800W: 100 – 127Vac
- 1000W: 200 – 240Vac
- 1000W: 200 – 240Vdc (for CCC only)
Dimension (W x H x L) Input - 100-127Vac / 9.8 - 7A / 50-60Hz
- 200-240Vac / 7 - 5A / 50-60Hz
- 200-240Vdc / 7 - 5A (for CCC only)
+12V - Max: 66.7A / Min: 0A (100-127Vac)
- Max: 83A / Min: 0A (200-240Vac)
- Max: 83A / Min: 0A (200-240Vdc)
12Vsb Output Type - 25 Pairs Gold Finger Connector
Certification Titanium Level [Test Report]PC Health MonitoringVoltage - Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages.
- 5+1 Phase-switching voltage regulator
FAN - 8x 4-pin fan headers
- Status monitor for speed control
- Pulse Width Modulated (PWM) fan connectors
Temperature - Support to monitor Supermicro AOC temperatures from IPMI or SD 5
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 8x Fan Connectors
- Thermal Monitor 2 (TM2) support
- PECI
LED - Memory DIMM ECC error LEDs
- CPU / System Overheat LED
- Suspend static indicator LED
- UID/Remote UID
Other Features - 4x 8-pin GPU power connectors
- Chassis intrusion detection
- Chassis intrusion header
- SDDC Support
- RoHS
Operating Environment / ComplianceRoHS Environmental Spec. - Operating Temperature:
5°C to 40°C (41°F to 104°F) - Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F) - Operating Relative Humidity:
8% to 90% (non-condensing) - Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|