3D Printer Resin 405nm UV-Curing Photopolymer Grey 500g Standard Low Odor For Sale
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
3D Printer Resin 405nm UV-Curing Photopolymer Grey 500g Standard Low Odor
Price: US $19.99
High precision and Low Shrinkage
LODESIGN 3D photopolymer resin ensures the print accuracy and make sure all the parts printed to fit in the right place. The models have perfectly detail performance, with high precison and low shrinkage.
Quick Curing and Light Odor
LODESIGN 3D photopolymer resin can be rapid prototyping. It ensures consistent, high-quality prints and has a very light odor and no pungent smell.
For LCD and Wide Compatibility
LODESIGN 3D photopolymer resin is specifically designed for LCD light source. Sensitive to 355-405nm UV light. Compatible with most LCD/DLP resin 3D printers.
Printing Setting
Normal Exposure Time: 2 - 15s;
Bottom Exposure Time: 30 - 50s;
Number of Bottom Layers: 5 - 8 layers
Printable Layer Thickness: 0.02 - 0.05 mm
RESIN PARAMETERS
Hardness(D): 92-94
Liquid Density: 1.082g/ cm³
Tensile Strength: 45-50Mpa
Elongation: 5-8%
Flexure Strength: 75-85Mpa
Solidify Wavelength: 395-405nm
Shelf Life: 12 mnoths
Shake up the bottle before use and avoid direct sunlight and dust. Recommend usage temperature: 25℃
Wear a mask and gloves to avoid direct skin contact and maintain indoor ventilation.
Once the model is finished, please wash it with plenty of water or alcohol of high concentration (95% or more). If with alcohol, the washing time is 20-50s. After washing, air dry or blow off the remaining alcohol, and expose it to the UV light or direct sunlight, until the surface become dried.
In case of sin contact, rinse with plenty of water immediately and/or resort to the medical aid. Keep away from children and pregnant women. Those who are allergic to acrylics are not allowed to access.
