Welcome to our stores!Special Offers Just for You! We guarantee you will be satisfied.6PCS 170 Tie Points Mini Breadboard Kit, SYB-170 Solderless Prototype Kit PCB Board + 65PCS Male Cable for Arduino for Raspberry PI DIY ProjectsImage GalleryProduct Information

Product parameters:
Model: SYB170
Material: ABS plastic board
Hole diameter: 1mm
Pitch: 2.54mm/0.1incn
Size: 47x35x8.5mm
Voltage: 300V
Low current: < 5A
for 22-29awg jumper wires
6 different colors (black, white, green, yellow, blue and red) 170 pin boards. Characteristics:
1.Can be very strong and connected with pins without welding, allowing you to quickly perform circuit testing. 2. With fixed metal spring under the connection point for good connections, springs perfectly aligned with the points, ensures the same tightness of all 170 points. The current flows horizontally, there are 5 insertion points on the horizontal current path with low resistance. 3. Multiple boards can be connected together for expansion, self-adhesive tape on the back of the breadboard (single-sided prototyping PCBs). Applications:
1.Perfect for prototyping circuits, electronic and electrical experiments without soldering; 2.Good for breadboard jumper cable projects and other electrical DIY kits. Holds transistors, diodes, LEDs, resistors, capacitors and almost all types of components. 65PCS Male cables feature:
There are about 65 per Set
65PCS lines length as about below:
24CM (include needle) 4PCS
20CM (include needle) 4PCS
16CM (include needle) 8PCS
12CM (include needle) 44PCS
(Note: maybe have 1-2PCS error when we pack it).

Package include:
6 x 170 Tie Mini Breadboard Kit Solderless Breadboard Circuit Board
1 x set of 65pcs male to male jumper cable

Key Features

• Model: SYB170; Material: ABS plastic board; Hole diameter: 1mm/0.04 inch ; Pitch: 2.54mm/0.1 inch; Size: 47x35x8.5mm / 1.85x1.38x0.33inch; 6 different colors (black, white, green, yellow, blue and red) 170 pin board.
• Voltage: 300V; low current: < 5A ; for 22-29awg Jumper Wires; Can be very strong and pin connected without welding, you can quickly do circuit testing.
• with fixed metal spring under the connection point for good connections, springs perfectly aligned with the points, makes the tightness of all 170 points the same. Current flows horizontally, there are 5 insertion points on the horizontal current path with low resistance.
• Besides, they are quite durable even if you separate them in single wire form. Multiple boards can be connected together for expansion, self-adhesive tape on the back of the bread board (single-sided prototyping PCBs).
• Perfect for prototyping circuits, electronic and electrical experiments without soldering; Good for breadboard jumper wires project and other electrical DIY kits. Takes transistors, diodes, LEDs, resistors, capacitors and virtually all types of components.

Thank you for shopping with us!

Contact Us

📧 For any questions, please reach out via the messaging system. We aim to respond within 24 hours.

Payment Methods💳 We accept PayPal, credit cards, and other -supported payment methods. Ensure your payment details are up-to-date to avoid any delays.Shipping Information

• Your item will be shipped to the address on your account. Please verify your address before completing the purchase.
• Shipping usually takes 3-7 business days.
• In case of delays, please allow an additional 2-3 business days due to postal service issues or technical problems.
• We use reliable shipping services such as UPS, FedEx, and USPS.
• Shipping is only available to the 48 contiguous states. We do not ship to Alaska, Hawaii, US territories, APO/FPO addresses, or PO Boxes. Local pickups are not available.
• If there are any issues with your delivery, please contact us promptly.

Your response

🌟 We value your response and aim to earn your trust. If you're not satisfied with your purchase, please contact us and we'll work to resolve the issue.

Return Policy

- We offer a 30-day return policy.

- If the item is defective or you are not satisfied, contact us for a replacement or refund.

- All returns must be sent to the address provided upon contacting us.