ADT‑Link PCI‑E 5.0 X4 To X1 Extension Cable 25CM, For Network Card Hard Drive USB Adapter Card
Product Model: K21 Series Goods
Product Name: PCI-E 5.0 x4 to x1 Adapter Extension Cable
Wire length: 5~100cm (customizable wire length supported)
Bandwidth speed: PCIe 5.0 x1 gen5 32G/bps
Supported Cards: Wireless network cards, wired network cards, capture cards, USB cards, SSD cards. As long as the PCIe card is x1 and the motherboard slot is a x4 interface, compatibility is ensured.
Procurement Note: For bulk orders, it is essential to purchase 1-2 samples for testing and verification before proceeding with large-scale procurement.
Wire Length Description:
The length of the wires in our store refers to the visible portion of the wire, excluding the PCB and connectors. There may be slight variations in the wire length, so please refrain from purchasing if this is a concern. Refer to the dimensional markings in the image below.
Compilation of Technical Issues:
How is the quality of the wire? Is it shielded?
Shielded with a metal layer, utilizing advanced EMI-shielding conductive polymers, new materials for EMI shielding, and flat cable design. This technology enables each cable to be fully covered by conductive polymers for electromagnetic interference shielding, preventing the ingress or egress of electromagnetic frequencies, minimizing interference and performance degradation, and reducing the weight of the wiring harness.
Is the wire soft? Can it be bent?
The wire is the fifth generation PCIe dedicated black thin wire independently developed by ADT, with a thickness of 0.8mm. The wire is very soft and bendable, which does not affect use, but cannot be pulled or pulled.
Purchase precautions:
1. When inserting the cable, be sure to recognize the direction and avoid inserting it in the wrong direction or position to prevent burning out the equipment. When inserting the cable, first hold the device's socket and then plug it in to avoid forcefully disconnecting the socket pins. Bending and pulling are prohibited within 2cm of the welding point between the two ends of the wire and the circuit board.
2. The signal driving capabilities and other conditions of various motherboards and devices are not the same. Our store's test results do not guarantee consistency with yours. As long as an extension cable is connected, there will be signal loss and compatibility issues. For those with high requirements, please do not purchase.
3. Graphics cards or motherboards are electronic devices that will age and oxidize over time, and connecting extension cords will only make them more unstable. Old devices are not supported. Your device is not supported if it is over three years old. Please do not purchase.
4. Purchase is limited to products designated by the product engineer for product testing purposes only. Do not purchase for other purposes.
