TESTING & COSMETIC NOTES:
This is a USED WORKING item in GOOD cosmetic condition that IS THOROUGHLY TESTED and is GUARANTEED WORKING
Unit has been reset to factory settings, see console log below.
COMPONENTS INCLUDED IN THIS sale:• (1) - CISCO CATALYST 2960-X WS-C2960X-48FPS-L 48-PORT 4-SFP POE+ SWITCH
• (1) - CISCO C2960X-STACK FLEXSTACK PLUS STACKING MODULE
• (1) - POWER CORD
REPLACEMENT or MONEY BACK GUARANTEE:When you receive a Guaranteed item from OC Depot, it should perform as described. In the rare situation that this is not the case, we will send a replacement upon safe return of the original item within 30 days of receiving the item. If a replacement is not available we will honor the terms of our Money-Back Guarantee.
ADDITIONAL INFORMATION:CPU rev: B
Image passed digital signature verification
Board rev: 24
Testing DataBus...
Testing AddressBus...
Testing Memory from 0x00000000 to 0x1fffffff.../
Using driver version 4 for media type 1
Xmodem file system is available.
Base ethernet MAC Address: 00:87:31:26:1d:00
The password-recovery mechanism is enabled.
USB EHCI 1.00
USB EHCI 1.00
USB Console INIT
Initializing Flash...
mifs[5]: 12 files, 1 directories
mifs[5]: Total bytes : 1806336
mifs[5]: Bytes used : 833536
mifs[5]: Bytes available : 972800
mifs[5]: mifs fsck took 1 seconds.
mifs[6]: 2 files, 1 directories
mifs[6]: Total bytes : 3870720
mifs[6]: Bytes used : 1213440
mifs[6]: Bytes available : 2657280
mifs[6]: mifs fsck took 0 seconds.
mifs[7]: 5 files, 1 directories
mifs[7]: Total bytes : 258048
mifs[7]: Bytes used : 8192
mifs[7]: Bytes available : 249856
mifs[7]: mifs fsck took 1 seconds.
mifs[8]: 5 files, 1 directories
mifs[8]: Total bytes : 258048
mifs[8]: Bytes used : 8192
mifs[8]: Bytes available : 249856
mifs[8]: mifs fsck took 0 seconds.
mifs[9]: 648 files, 20 directories
mifs[9]: Total bytes : 122185728
mifs[9]: Bytes used : 27117568
mifs[9]: Bytes available : 95068160
mifs[9]: mifs fsck took 34 seconds.
...done Initializing Flash.
Loading />n"...Verifying image />..................Image passed digital signature verification
File />uncompressed and installed, entry point: 0x3000
executing...
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software, C2960X Software (C2960X-UNIVERSALK9-M), Version 15.2(2)E5, R
ELEASE SOFTWARE (fc2)
Technical Support: http:/www.cisco.com/techsupport
Copyright (c) 1986-2016 by Cisco Systems, Inc.
Compiled Thu 02-Jun-16 01:31 by prod_rel_team
Initializing flashfs...
Using driver version 4 for media type 1
mifs[7]: 12 files, 1 directories
mifs[7]: Total bytes : 1806336
mifs[7]: Bytes used : 833536
mifs[7]: Bytes available : 972800
mifs[7]: mifs fsck took 0 seconds.
mifs[7]: Initialization complete.
mifs[8]: 2 files, 1 directories
mifs[8]: Total bytes : 3870720
mifs[8]: Bytes used : 1213440
mifs[8]: Bytes available : 2657280
mifs[8]: mifs fsck took 0 seconds.
mifs[8]: Initialization complete.
mifs[9]: 5 files, 1 directories
mifs[9]: Total bytes : 258048
mifs[9]: Bytes used : 8192
mifs[9]: Bytes available : 249856
mifs[9]: mifs fsck took 0 seconds.
mifs[9]: Initialization complete.
mifs[10]: 5 files, 1 directories
mifs[10]: Total bytes : 258048
mifs[10]: Bytes used : 8192
mifs[10]: Bytes available : 249856
mifs[10]: mifs fsck took 1 seconds.
mifs[10]: Initialization complete.
mifs[11]: 648 files, 20 directories
mifs[11]: Total bytes : 122185728
mifs[11]: Bytes used : 27117568
mifs[11]: Bytes available : 95068160
mifs[11]: mifs fsck took 1 seconds.
mifs[11]: Initialization complete.
...done Initializing flashfs.
Checking for Bootloader upgrade..
Boot Loader upgrade not required (Stage 2)
FIPS: Flash Key Check : Begin
FIPS: Flash Key Check : End, Not Found, FIPS Mode Not Enabled
POST: MA BIST : Begin
POST: MA BIST : End, Status Passed
POST: TCAM BIST : Begin
POST: TCAM BIST : End, Status Passed
POST: ACT2 Authentication : Begin
POST: ACT2 Authentication : End, Status Passed
extracting front_end/front_end_ucode_info (43 bytes)
Software version is different so extracting
the whole bundle
Waiting for Stack Master Election...
POST: Inline Power Controller Tests : Begin
POST: Inline Power Controller Tests : End, Status Passed
POST: Thermal, Fan Tests : Begin
POST: Thermal, Fan Tests : End, Status Passed
POST: PortASIC Stack Port Loopback Tests : Begin
POST: PortASIC Stack Port Loopback Tests : End, Status Passed
POST: PortASIC Port Loopback Tests : Begin
POST: PortASIC Port Loopback Tests : End, Status Passed
POST: EMAC Loopback Tests : Begin
POST: EMAC Loopback Tests : MAC Loopback Passed
POST: EMAC Loopback Tests : PHY Loopback Passed
POST: EMAC Loopback Tests : End, Status Passed
Election Complete
Switch 2 booting as Master
Waiting for Port download...Complete
Initializing Port Extension Feature Support...
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
If you require further assistance please contact us by sending email to
[email protected].
cisco WS-C2960X-48FPS-L (APM86XXX) processor (revision L0) with 524288K bytes of
memory.
Processor board ID FCW2029A4WP
Last reset from power-on
1 Virtual Ethernet interface
1 FastEthernet interface
52 Gigabit Ethernet interfaces
The password-recovery mechanism is enabled.
512K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address : 00:87:31:26:1D:00
Motherboard assembly number : 73-16691-05
Power supply part number : 341-0527-02
Motherboard serial number : FOC20296JVM
Power supply serial number : DCB20296C8X
Model revision number : L0
Motherboard revision number : A0
Model number : WS-C2960X-48FPS-L
Daughterboard assembly number : 73-14200-03
Daughterboard serial number : FOC203002Z8
System serial number : FCW2029A4WP
Top Assembly Part Number : 68-100469-01
Top Assembly Revision Number : C0
Version ID : V04
CLEI Code Number : CMMLN00ARC
Daughterboard revision number : A0
Hardware Board Revision Number : 0x18
Switch Ports Model SW Version SW Image
------ ----- ----- ---------- ----------
* 2 52 WS-C2960X-48FPS-L 15.2(2)E5 C2960X-UNIVERSALK9-
M
Press RETURN to get started!
*Mar 1 00:00:27.787: Read env variable - LICENSE_BOOT_LEVEL =
*Jan 2 00:00:00.153: Module nam
e = c2960x_lanbase Next reboot level = lanbase and License = lanbase
Apr 2 10:50:23.405: Flexstack module is 1
Apr 2 10:50:23.499: %HPAA:hpaa_port_bitmap_init:254:n_ports = 52, sizeof (**hpa
a_port_bitmap.bitlist_array) = 16
Apr 2 10:51:13.541: %STACKMGR-4-SWITCH_ADDED: Switch 2 has been ADDED to the st
ack
Apr 2 10:
--- System Configuration Dialog ---
Enable secret warning
----------------------------------
In order to access the device manager, an enable secret is required
If you enter the initial configuration dialog, you will be prompted for the enab
le secret
If you choose not to enter the intial configuration dialog, or if you exit setup
without setting the enable secret,
please set an enable secret using the following CLI in configuration mode-
enable secret 0
----------------------------------
Would you like to51:14.704: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan
1, changed state to down
Apr 2 10:51:15.152: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEtherne
t0, changed state to down
Apr 2 10:51:16.987: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for type
vlan
Apr 2 10:51:43.187: %STACKMGR-5-SWITCH_READY: Switch 2 enter the initial confi
guration dialog? [yes/no]:
% Please answer 'yes' or 'no'.
Would you like to enter the initial configuration dialog? [yes/no]:
% Please answer 'yes' or 'no'.
Would you like to enter the initial configuration dialog? [yes/no]:
% Please answer 'yes' or 'no'.
Would you like to enter the initial configuration dialog? [yes/no]:
% Please answer 'yes' or 'no'.
Would you like to enter the initial configuration dialog? [yes/no]:
% Please answer 'yes' or 'no'.
Would you like to enis READY
Apr 2 10:51:43.187: %STACKMGR-4-STACK_LINK_CHANGE: Stack Port 1 Switch 2 has ch
anged to state DOWN
Apr 2 10:51:43.187: %STACKMGR-4-STACK_LINK_CHANGE: Stack Port 2 Switch 2 has ch
anged to state DOWN
Apr 2 10:51:43.638: %STACKMGR-5-MASTER_READY: Master Switch 2 is READY
Apr 2 10:51:43.687: %PLATFORM-6-FLEXSTACK_INSERTED: FlexStack moduter the initi
al configuration dialog? [yes/no]:
% Please answer 'yes' or 'no'.
Would you like to enter the initial configuration dialog? [yes/no]:
% Please answer 'yes' or 'no'.
Would you like to enter the initial configuration dialog? [yes/no]: le inserted
in Switch 2.
Apr 2 10:51:45.141: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C2960X Software (C2960X-UNIVERSALK9-M), Version 15.2(2)E5, R
ELEASE SOFTWARE (fc2)
Technical Support: http:/www.cisco.com/techsupport
Copyright (c) 1986-2016 by Cisco Systems, Inc.
Compiled Thu 02-Jun-16 01:31 by prod_rel_team
Apr 2 10:51:45.382: %USB_CONSOLE-6-MEDIA_RJ45: Console media-type is RJ45.
Apr 2 10:51:45.665: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to d
own
Apr 2 10:51:4n6.682: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthern
et0, changed state to down
Switch> Please Click Here to Visit Our StoreSearchBy31 - 276104 | Loc: I33 | L: Mitchell |T: | PM: Nick | QTY: 0| Plan: 20% - NET of FEES |22.00"x18.00"x5.00"20.00lbs |Start: $0.00 | BIN: $109.99 | |2026-03-30 ||51268
