UBB Store

Commodore Amiga 2500 GVP 68030 2000 Desktop Computer MegAChip SCSI2SD RGBtoHDMI
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Commodore Amiga 2500 GVP 68030 2000 Desktop Computer MegAChip SCSI2SD RGBtoHDMI
Price: US $2499.98

NTSC Commodore Amiga 2500/2000 Desktop Computer with
DKB 2MB MegAChip CHIP RAM, 8373 ECS Super Denise,
GVP 68030@40mhz CPU/FPU Accelerator
Fully Populated with 16mb Original GVP 60ns RAM,
16gb SCSI2SD Harddrive, 40X SCSI CDROM Drive
RGBtoHDMI LCD/LED HDMI Scandoubler/FlickerFixer
21\" ASUS LCD/LED Color HDMI Full HD Monitor

Specs:
Commodore Amiga Motherboard rev.6.2 with ECS Chipsetv3.1 Kickstart ROM, DKB 2MB MegAChip CHIP RAM, 8373 ECS Super DeniseGVP 68030@40mhz CPU/FPU Accelerator
Fully Expanded to 16mb of Original Matching GVP 60ns RAM SIMMs
Lastest Eprom v4.15, SCSI2SDv5.2 with 16gb SD SCSI Harddrive with
custom 3D Printed bracket to allow for External Accessibility
NOT Hot-Plugable make sure computer is off before inserting/removing SD CardDVD-305S 40X Internal Slot Load SCSI CDROM Drive
Painted to match original front faceplateNew working coin cell battery and holder installed.
Installed onto the inner case front to be away from the motherboard and
allow easy access for replacing the battery when needed.880kb Internal Floppy Disk Drive (Chinon FB-354)
Heads cleaned, gear & rails lubricated, runs great and quietGOTEK 880kb Internal Floppy Drive Emulator
Switch between upto 999 Amiga Floppy ADF Images
Latest FlashFloppy Emulator firmware Installed
with NEW HiRes OLED Display
Audio Speaker for Drive Access Sounds
Relocated Access LED to match original floppy drive
Front Painted to match original faceplate.
New 8gb Ironman USB Flash Drive INCLUDED,
with All software installed included on USB drive as backup.Genuine Commodore Amiga 2000 200watt Clean power supplyRGBtoHDMI Scandoubler/FlickerFixer pixel-perfect
HDMI output to any modern LCD/LED Monitor.
with custom made bracket for rear external access.
Onboard 23pin RGB Video for 15khz Monitors works as well.
Both can be used at the same time or independent of each other.
The video display is mirrored between the two devices if used at the same time.Commodore Amiga 2000 KeyboardCommodore 2 Button Tank Mouse and Black Mouse Pad
If you would prefer one of the other 6 mouse pads I have instead,
let me know and can include one of them.21\" ASUS VE228H LCD/LED Color HDMI Full HD 1920x1080 Monitor
with VGA, DVI and HDMI inputs.
Amiga resolutions are standard Amiga resolutions.
Monitor has stereo speakers, but they are not good with the Amiga.
Volume is extremely low even at 100%. Only mentioning it for completeness.
I would assume you have your own speakers. Picture quality is fantastic though.Power Cord and NEW 6\' Stereo Audio cableManuals/Books Included:
copy of GVP Accelerator Manual (not pictured, but included)
Original AmigaOS v3.0 Manuals - Workbench, AmigaDOS and ARexx
am including v3.0 Manuals, which are basically 90% the same as version 3.1 manuals.
Introduction to the Commodore Amiga 2000 Manual
Has some writing on the cover, all other pages ok.
copy of DKB 2MB MegAChip Manual
Can read about the RGBtoHDMI here:
[link removed by ]
Can read about the Gotek FlashFloppy here:
[link removed by ]Software Disks Included:
copy of GVP Accelerator Install Disk
copy of Amiga OS v3.1 Install, Workbench, Extras, Fonts, Storage, Locale
copy of AsimCDFS v3.10 CDROM Software Install Disk
copy of MagicWB v2.1p Install Disk
All Disks to setup of the computer have been copied onto the USB StickCD Included:
copy of Fiskmarket v2.4 CD - Fish Disks 260-1000 to get you startedSome info about the SCSI2SDv5.2 adaptor configuration:
I currently have it setup as 4 Harddrives. ID0 to ID3 (2 Partitions on ID0 and the others are 1 Partition each),
CDROM is ID4. ID0 is 1.68GB (OS3.1) and 750mb (BACKUPS) Partitions, ID1 is 4GB (Work_4gb1),
ID2 is 4GB (Work_4gb2) and ID3 is 4GB (Work_4gb3). Its currently set to bootup into Amiga OS 3.1.
The adaptor is also setup with termination turned off (so power is not required to the adaptor).
I\'ve installed it into a 3D printed bracket that is installed into one of the back expansion slots.
QUIET, COOL and FAST!!!

Has some small nicks, scratches and some yellowing here and there, otherwise,All is Tested in Excellent Clean Working Condition and
Guaranteed Against DOA! as pictured.

Shipping Includes Insurance and Signature Required.
Will package well for safe shipping.

Please be sure to open the computer and make sure all cards are seated properly upon arrival.
Sometimes they can get loose in the shipping

Buy Now