• CLICK! YOU WILL LOVE IT: The snap-fit cover locks on with one confident press. That satisfying click is how you know the channel is sealed tight. Pop it off just as easily whenever you need to add, remove, or swap a cable. No jamming, no cracking, no tools. Just open, route, click, done.
• THE ONLY KIT YOU NEED FOR THE WHOLE ROOM: Most cord hider kits run out at 10 to 13 feet, leaving you short and frustrated. This 315 inch cable hider includes 20 self-adhesive channels, each 16 inches long, that connect piece by piece like Tetris blocks. Straight connectors, inside corners, outside corners, and T connectors lock everything together to fit any wall layout. One cable management kit, one purchase, nothing else to buy.
• PEEL, PRESS, DONE: Each cord cover channel comes ready to install right out of the box. Peel the backing, press to your wall, move on. Need a stronger hold? Screws and anchors are included too. You pick the method, we provide both.
• RENTER AND HOMEOWNER FRIENDLY, BUILT TO LAST: This A+ cable concealer is made to serve your home for years. The adhesive holds channels firmly in place and the material will not yellow or warp over time. If you ever need to remove a section, gentle warm air from a hair dryer softens the bond and lets you peel it off without damaging your wall.
• EVERYTHING IN ONE BOX: 20 channels, 20 straight connectors, 3 inside corners, 3 outside corners, 3 T connectors, screws, and anchors. Not a cheap plastic strip. A complete wire hider solution engineered for real homes and real cable management needs.
• FITS 4 TO 5 CABLES: Each channel comfortably holds your typical cord bundle including power cables, HDMI, Ethernet, and speaker wire with room to spare. Wide enough for real setups, slim enough to stay low profile on your wall. Already trusted in hundreds of thousands of American homes.
• PAINTABLE IF YOU WANT: The smooth white finish blends with most walls and looks polished with zero extra effort. Most customers use it as is. If you want a perfect match with your wall color, the surface accepts standard wall paint.
• BABY-PROOF IN MINUTES: Exposed power cords are a pulling hazard for curious toddlers. One tug on a wire connected to a mounted TV can lead to serious consequences. Tucking cords inside a rigid cable hider creates a barrier between little hands and live wires. One afternoon of easy installation and that worry is gone.
• PETS LOVE CORDS. PROTECT THEM: Dogs and cats love chewing on dangling cables and exposed wires are a serious danger to your furry family members. This A+ wire cover kit locks cords safely inside a durable channel. And your spouse? They are finally going to stop asking when you plan to do something about those cables.
• YOUR WALL DESERVES BETTER: Those cords hanging down your wall are not just ugly, they are working against your peace of mind. This cable raceway kit is the fastest way to hide cords and give any room the clean, calm look it deserves. Join the hundreds of thousands who already made the switch with A+

Product description HOW TO USE? PEEL THE TAPE

Make sure the wall surface is clean and dry before mounting. Dust or moisture will reduce adhesive strength, so wipe the surface first.

STICK TO THE WALL

Align the raceway along your desired path and press firmly against the wall for 30 seconds. Start from one end and work your way across.

INSERT CABLES

Lay your cables inside the channel. Use the included corner, T-shape and joining pieces wherever the raceway turns, splits or connects.

SNAP ON THE COVER

Click! Snap the cover into place and you're all set. Need to add a cable later? Just pop it open anytime, no tools needed.

Clean Setup. No More Cable Chaos.

You didn’t spend all that money on a beautiful setup just to stare at tangled cables running down your wall. Your space deserves to look clean, and that starts with hiding the cords. The A+ Cable Raceway Kit includes 20 channels for up to 26 feet of coverage. With straight, corner, and T connectors, create a seamless path from your TV to the baseboard and beyond. One kit. One purchase. Nothing else to buy.

WHAT’S INCLUDED IN THE KIT? ALL-IN-ONE FULL KIT 20PCS 16” RACEWAY CONNECTORS & CORNERS USER MANUAL & OPTIONAL SCREWS CLICK. Snap It. Done.

Every channel comes with pre-applied adhesive. Peel, press, done. Need extra hold? Screws and drywall anchors are included. Snap-fit covers click into place and remove easily for changes. The smooth white finish is paintable to match any wall. Run along baseboards, walls, or ceilings and cut to size. No tools needed. Keeps cords out of reach, making your space safer, cleaner, and easier to live with.

• Do the cable raceways come with adhesive tape?

  Yes! Each raceway includes high-quality double-sided adhesive tape that bonds firmly to your wall. Note: heavily textured surfaces may reduce adhesive performance. In that case, simply use the included screws and anchors for a permanent hold.

• How many cables fit inside each raceway?

  Each raceway comfortably fits 3 to 4 standard cables; thinner cables like speaker wire can go up to 5. With over 10 years of experience in cable management, we designed this size to be the sweet spot for most home and office setups.

• Can I mount this on a textured wall?

  Let's be honest: textured surfaces reduce the area the tape can grip. It works in about 90% of cases, but adhesion may vary. No worries though, the included screws and wall anchors give you a rock-solid mount on any surface.

• Can the raceways be painted to match my wall?

  Absolutely! Most customers use them as-is in white, but our raceways are made from paint-friendly PVC. Whether you prefer a brush or spray can, you can easily match any wall color for a seamless, built-in look.

• Is 315 inches enough? What if I need more?

  315 inches is about 26 feet, the longest kit in the category, and more than enough for a standard living room TV setup. For larger spaces, two kits connect seamlessly, and every box includes all the corner and joining pieces you need.