After the printing is completed, wait for the hot bed to cool down to a suitable time for taking off the mold, then try to remove the mold, usually no need of other tools such as shovel.

Compared with magnetic mat or pei sticker, the glass plate provides the most flat(Flatness error range of 0.1 mm) build surface, ensuring high flatness for the bottom of model.

To solve issue of print edges curling, a composite microporous coating is added to the glass surface, ensuring that the bottom of mold can be firmly attached to the surface of the print platform.

Please clean the dust with a soft cloth. Wipe the stains with over 95% strength alcohol or soap water gently.

Inorganic coating is covered. The hardness can be up to 8 Mohs, the hardness is better than aluminum and copper. It can resistant to 400℃ and use repeatedly without reducing performance.

Just need four middle-size clips to fix the Glass Bed on your 3D printer's Heated-Bed and then level the bed before printing. It is also convenient to pick off after printing done.

Typically 3D printers that use a 235mm*235mm print platform can use this glass bed.

Fit for PLA, PETG, Wood, TPU, AMS and most 3d printer filaments, especially official ender series PLA filament

Consistent with the temperature range of most filaments.

Whether you have a direct extruder or a Bowden extruder, the temperatures are usually approximate.

This glass bed is aimed at Higher requirement for print accuracy, because glss bed is heavy, please control the Y-axis moving speed reasonably.

The glass plate is thicker (4mm thick), please lower platform hot bed to avoid nozzle scraping the glass bed.

Coated side of glass bed must come down to room temperature or a bit higher for releasing mold. Then as the print completed, DO NOT try to remove the model from the glass bed with force.