Creality Space Pi Filament Dryer Box Space Pi Filament Space Pi X4 LOTModel:Space π Filament Dryer-design for one roll filamentFeature:💯【Creality Filament Dryer Space Pi】Efficiently dry filament with fast selection.By effectively drying filament as you print, the Creality Filament Dryer Space Pi helps prevent common issues such as stringing, clogs, poor adhesion, and layer shifting in 3D printing. It improves the overall quality of printed models and reduces the impact of external environmental factors on the printing process.
💯【PTC 360° Hot-air Heating】The Creality Space Pi, with PTC 360° heating tech, quickly and evenly heats filament. Its built-in fan distributes hot air, removing moisture for better printing results and consistent quality.
💯【Advanced PTC Heating Technology】Our filament dryer stands out with its one-of-a-kind 110W PTC heater, setting us apart in the market. Unlike many dryers relying on a PI heating pad, which often leads to uneven drying, Creality Space PI equipped with the PTC heater ensures uniform drying. And this PTC heater isn't just durable and energy-saving.
💯【LCD Touch Screen】 Equipped with a 3.7-inch touch screen, the Creality Space Pi Filament Dryer makes it a cinch for you to manage and monitor drying conditions effortlessly.
💯【Convenient One-key Set for 12 Filaments】The filament dry box offers one-key presets for various filament types, supporting up to 12 materials, including standard and advanced composites like PLA-CF, PA-CF, and ASA. You can also manually adjust the temperature from 45°C to 70°C for precise control.
💯【48 Hours Timer Function】The heating duration can be freely set from 0-48 hours, allowing the filaments to be fully dried for better printing results.
💯【Parameter Power-off Memory Function】After a power outage, the drier box can restart and remember your previous filaments and temperature settings, saving you the trouble of resetting and ensuring fast drying.Specification:
Model: DB-03
Product size: 300x200x100mm
Net weight: 1140g
Input voltage: US: 110V, 50/60Hz
Rated power: 145W
Temperature control range: 45℃-70℃
Heating duration: 0-48h
Filament diameter: 1.75mm/2.85mm
Package Weight:1450g/3.19lb Model:Space Pi Filament Dryer Plus-design for two rolls filamentFeature:🤗【Creality Filament Dryer Space Pi Plus】2 rolls capacity, double drying filament with fast selection.By effectively drying filament as you print, the Creality filament dryer Space Pi Plus helps prevent common issues such as stringing, clogs, poor adhesion, and layer shifting in 3D printing. It improves the overall quality of printed models and reduces the impact of external environmental factors on the printing process.
🤗【PTC 360° Hot-air Heating】The Creality Space Pi Plus, with PTC 360° heating tech, quickly and evenly heats filament. Its built-in fan distributes hot air, removing moisture for better printing results and consistent quality.
🤗【Advanced PTC Heating Technology】Our filament dryer stands out with its one-of-a-kind 110W PTC heater, setting us apart in the market. Unlike many dryers relying on a PI heating pad, which often leads to uneven drying, Creality Space PI Plus equipped with the PTC heater ensures uniform drying. And this PTC heater isn't just durable and energy-saving.
🤗【LCD Touch Screen】 Equipped with a 3.7-inch touch screen, the filament drying box makes it a cinch for you to manage and monitor drying conditions effortlessly.
🤗【Convenient One-key Set for 12 Filaments】The filament dry box offers one-key presets for various filament types, supporting up to 12 materials, including standard and advanced composites like PLA-CF, PA-CF, and ASA. You can also manually adjust the temperature from 45°C to 70°C for precise control.
🤗【48 Hours Timer Function】The heating duration can be freely set from 0-48 hours, allowing the filaments to be fully dried for better printing results.
🤗【Parameter Power-off Memory Function】After a power outage, the drier box can restart and remember your previous filaments and temperature settings, saving you the trouble of resetting and ensuring fast drying.Specifications:
Product name: Creality Space Pi Filament Dryer Plus
Model: DB-04
Package size: 343x226x300mm
Net weight: 1900g
Product color: Space grey
Input voltage: US 110V 50/60Hz
GB/UK/EUR 220V 50/60Hz
Rated power: 160 W
Temperature control range: 45°C-70°C
Heating duration:0-48h
Filament diameter: 1.75mm/2.85mmPacking List:1x Dryer Box
1x Power cord
1x manualModel:SpacePi X4-design for 4 rolls filamentsAbout this item

• Dry 4 Spools at Once: Dry and print at once for maximum efficiency Effortless multi-color printing, seamless multi-filament drying.
• 200W + 200W PTC Heats Up to 85°C: The dual 200W PTC heaters, paired with insulated chambers, significantly improve heating efficiency, allowing temperatures to reach up to 85°C. This ensures continuous and effective drying of engineering filaments such as PA, PAHT, PC.
• Dual Chambers Independent Temperature Control: Each chamber is equipped with an independent PTC heater, allowing simultaneous drying of two filament types at different temperatures in one machine.
• Flexible and Energy-Efficient Drying: You can choose between single or dual chamber modes for energy-efficient drying. Single-chamber operation saves up to 40% energy, it's eco-friendly and cost-effective.
• SpaceDry 4.0 One-stop Drying Solution :The SpaceDry 4.0 achieves the perfect balance between efficient dehumidification and energy-saving drying. Its dual-chamber design significantly reduces energy consumption while integrating efficient heating, desiccant regeneration, and active dehumidification to improve drying/storage capabilities
• 360° Hot Air Circulation: The 360° surrounding hot air circulation ensures efficient heating and consistent temperature, allowing for uniform drying of filaments inside thechamber.
• Desiccant Regeneration: The desiccant chamber connects to the heating airflow, regenerating the desiccant automatically with each use.No replacement needed, providing a hassle-free and efficient drying process.
• Active Dehumidification: Dual dehumidifying fans actively expel moisture during drying, no manual dehumidification.
• Triple Safety Protection: Intelligent self-checking for early detection of issues, ensuring safe and worry-free drying.
• Wide Compatibility: Large size for 1kg/2kg spools. Works perfectly with all standard filament diameters 1.75/2.85mm

1. What types of filaments can SpacePi X4 dry?SpacePi X4 supports drying common filaments like PLA, PETG, ABS, ASA, PET, PA, PAHT, PC, PVA, PP, TPU, and their variations. For best results, follow the drying temperature recommended by the filament manufacturer. Filaments requiring drying temperatures up to 85°C can be dried efficiently. Those needing higher temperatures can still be dried, but with longer drying times.2. Can I use 3kg or 5kg spools?As long as the spool diameter is ≤200mm, width ≤150mm, and filament diameter is 1.75mm or 2.85mm.3. Can I dry filament while printing?We recommend drying the filament thoroughly before printing. Drying time varies by material—refer to the user manual or the manufacturer’s guidelines. Once dried, you can feed the filament to your printer using a 4mm PTFE tube.4. Can I use CFS and SpacePi X4 together?We suggest drying filament fully in SpacePi X4 before transferring it to CFS for printing. While CFS is in use, you can pre-dry and store the next batch in SpacePi X4, improving workflow efficiency without occupying CFS resources.5. Can I store filament in SpacePi X4 when it’s not drying?Absolutely! SpacePi X4 functions as a sealed storage unit, keeping filaments dry even when not actively heating. Its airtight design and built-in desiccant help maintain low humidity for long-term filament protection.Product Description:PaymentDelivery Terms of salesAbout usContact usPayment

• We accept payment via Payoneer.
• Please accomplish payment within 5 business days after you won the item.

Delivery

• All your orders will be shipped within 1-2 business days and updated tracking info.
• Please make sure your address is full and correct, so that your order will be soon shipped and delivered smoothly.
• Most orders will adopt standard shipping, which usually needs 3-5 biz days.
• Any PO BOX addresses need to be confirmed if delivery or not.

Terms of sales

• 1-month-returning for all orders after they are proved defective/damaged/faulty (videos or photos about it are

About us* Founded in 2014 by four 3D printing enthusiasts, Creality is a top global manufacturer of 3D printers. Our range of products includes DIY and resin 3D printers, 3D scanners, laser engravers, and filaments. Currently we host four brands of 3D printers: Creality as the master brand, and the three sub-brands of Ender, HALOT and Sermoon. Capitalizing on our innovatively leading technologies and products, we also offer consumer and professional printing solutions for makers, designers, schools and enterprises. Contact us

• Customer Service Hours: 9:00AM - 18:00PM BST (Beijing Standard Time) .
• You can also contact our official website customer support.